[Click] click - ping utility
Eddie Kohler
kohler at cs.ucla.edu
Wed Feb 24 15:13:38 EST 2010
Hi Kostas,
Ha, more than 18 months later. You have the wrong EtherEncap type I think;
you probably meant 0x0800, which is IP, not 0x8000, which is something else.
E
Kostas Pelechrinis wrote:
> Hi all,
>
> I am pretty new to using click so this question might seem simple to some people :) and I would like to ask your help for this. I am trying to create my own ping utility using click. I want to use the wireless interface ath0 in order to ping another wireless node. I have written the following configuration file
>
> ICMPPingSource(192.168.1.34,192.168.1.33,INTERVAL 1,LIMIT 10)
> -> AddSeqno()
> -> EtherEncap(0x8000, 00:02:6F:3E:2F:6D, 00:02:6F:3E:2F:5B)
> -> WifiEncap(0x00, 0:0:0:0:0:0)
> -> SetTXPower(63)
> -> AthdescEncap()
> -> ToDevice(ath0)
>
> It seems that the source is sending out packets but when I am doing tcpdump at the receiver the packets do not seem to be icmp type. As a result i don't get any ICMP_ECHO_REPLY back. What I wanted to ask you is if I need to write any specific configuration for the receiver as well. Also how can I print the statistics at the sender side as well?
>
> Thanks a lot for your help on this,
> Kostas
>
>
>
>
>
> _______________________________________________
> click mailing list
> click at amsterdam.lcs.mit.edu
> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
More information about the click
mailing list