[Click] Hardware Error when using Click with 7.3.20-NAPI

[Piers O'Hanlon]

You need to apply the following patch from the click git sources:
click.git/etc/linux-2.6.24.7-patch

Do you see this problem every time you run click on the e1000?

Piers.

2009/1/22  <Manel.BOURGUIBA at lip6.fr>:
> Thank you, but it seems that the attached patch work with linux.2.6.24.7,
> i have applyed it and nothing has changed. Actually, i did not found a
> patch of Click for linux.2.6.24.7, so i am using linux-2.6.16.13 for which
> seems to be a very old and buggy version. So, do you advise me to use
> linux.2.6.24.7, in this case, where can i find the corresponding click
> patch? or, is there any other solution with linux-2.6.16.13?
>
>
>> There seems to be a problem with the click.git 7.3.20 version - I
>> managed to fix it (attached patch - against git e1000-7.x/src) but I
>> also found that the newer version of the driver (e1000-7.6.15) with
>> this patch works on linux.2.6.24.7:
>> http://www.mail-archive.com/click@amsterdam.lcs.mit.edu/msg01868.html
>>
>> Also you might want try git version if you're not already...
>>
>> Piers O'Hanlon
>>
>> 2009/1/21  <Manel.BOURGUIBA at lip6.fr>:
>>> Hi everybody,I am a new Click user. I am using the 7.3.20-NAPI e1000
>>> driver.
>>> I have the following error when running udpgen.click :
>>>
>>> e1000_poll_on
>>> click: starting router thread pid 5063 (ffff81006bb3cdc0)
>>> e1000: eth0: e1000_reset: Hardware Error
>>> ToDevice eth0 rejected a packet!
>>> e1000: eth0: e1000_watchdog1: NIC Link is Down
>>> e1000: eth0: e1000_reset: Hardware Error
>>>
>>> Can you help me, I've been stuck for a long time!!
>>> Thanks
>>>
>>> _______________________________________________
>>> click mailing list
>>> click at amsterdam.lcs.mit.edu
>>> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>>>
>>
>
>
>