[Click] Hardware Error when using Click with 7.3.20-NAPI

[Manel.BOURGUIBA at lip6.fr]

I am using linux-2.6.24.7 now and it works!!
Thank you very much!!

> You need to apply the following patch from the click git sources:
> click.git/etc/linux-2.6.24.7-patch
>
> Do you see this problem every time you run click on the e1000?
>
> Piers.
>
> 2009/1/22  <Manel.BOURGUIBA at lip6.fr>:
>> Thank you, but it seems that the attached patch work with
>> linux.2.6.24.7,
>> i have applyed it and nothing has changed. Actually, i did not found a
>> patch of Click for linux.2.6.24.7, so i am using linux-2.6.16.13 for
>> which
>> seems to be a very old and buggy version. So, do you advise me to use
>> linux.2.6.24.7, in this case, where can i find the corresponding click
>> patch? or, is there any other solution with linux-2.6.16.13?
>>
>>
>>> There seems to be a problem with the click.git 7.3.20 version - I
>>> managed to fix it (attached patch - against git e1000-7.x/src) but I
>>> also found that the newer version of the driver (e1000-7.6.15) with
>>> this patch works on linux.2.6.24.7:
>>> http://www.mail-archive.com/click@amsterdam.lcs.mit.edu/msg01868.html
>>>
>>> Also you might want try git version if you're not already...
>>>
>>> Piers O'Hanlon
>>>
>>> 2009/1/21  <Manel.BOURGUIBA at lip6.fr>:
>>>> Hi everybody,I am a new Click user. I am using the 7.3.20-NAPI e1000
>>>> driver.
>>>> I have the following error when running udpgen.click :
>>>>
>>>> e1000_poll_on
>>>> click: starting router thread pid 5063 (ffff81006bb3cdc0)
>>>> e1000: eth0: e1000_reset: Hardware Error
>>>> ToDevice eth0 rejected a packet!
>>>> e1000: eth0: e1000_watchdog1: NIC Link is Down
>>>> e1000: eth0: e1000_reset: Hardware Error
>>>>
>>>> Can you help me, I've been stuck for a long time!!
>>>> Thanks
>>>>
>>>> _______________________________________________
>>>> click mailing list
>>>> click at amsterdam.lcs.mit.edu
>>>> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>>>>
>>>
>>
>>
>>
>