[Click] Hardware Error when using Click with 7.3.20-NAPI

[Manel.BOURGUIBA at lip6.fr]

Thank you, but it seems that the attached patch work with linux.2.6.24.7,
i have applyed it and nothing has changed. Actually, i did not found a
patch of Click for linux.2.6.24.7, so i am using linux-2.6.16.13 for which
seems to be a very old and buggy version. So, do you advise me to use
linux.2.6.24.7, in this case, where can i find the corresponding click
patch? or, is there any other solution with linux-2.6.16.13?


> There seems to be a problem with the click.git 7.3.20 version - I
> managed to fix it (attached patch - against git e1000-7.x/src) but I
> also found that the newer version of the driver (e1000-7.6.15) with
> this patch works on linux.2.6.24.7:
> http://www.mail-archive.com/click@amsterdam.lcs.mit.edu/msg01868.html
>
> Also you might want try git version if you're not already...
>
> Piers O'Hanlon
>
> 2009/1/21  <Manel.BOURGUIBA at lip6.fr>:
>> Hi everybody,I am a new Click user. I am using the 7.3.20-NAPI e1000
>> driver.
>> I have the following error when running udpgen.click :
>>
>> e1000_poll_on
>> click: starting router thread pid 5063 (ffff81006bb3cdc0)
>> e1000: eth0: e1000_reset: Hardware Error
>> ToDevice eth0 rejected a packet!
>> e1000: eth0: e1000_watchdog1: NIC Link is Down
>> e1000: eth0: e1000_reset: Hardware Error
>>
>> Can you help me, I've been stuck for a long time!!
>> Thanks
>>
>> _______________________________________________
>> click mailing list
>> click at amsterdam.lcs.mit.edu
>> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>>
>