[Click] Tcpdump and click
Eddie Kohler
kohler at cs.ucla.edu
Tue Feb 6 00:34:11 EST 2007
That config is a user level config, which is fine. Grid uses several
"unknown" ethernet types, namely 7fff, 7ffe, 7ffd; tcpudmp doesn't know how to
print these packets. Grid comes with elements that do, try adding Print
elements to the config. I think you're seeing what you would expect. For
more detailed questions someone else will need to help.
Eddie
Gentian Jakllari wrote:
> Hi Eddie,
>
> I attach the config I use, which has been generated by
> click/conf/make-dsdv-config.pl and comes as a part of the dsdv click
> implementation by Douglas De Couto.
>
> Judging from the tcodump output, "Broadcast, ethertype Unknown", it should
> be the problem that you're pointing out but haven't figure out yet how to
> change the Douglas' config file.
>
> Thanks,
> Gentian.
>
>
> On 2/5/07 12:15 PM, "Eddie Kohler" <kohler at cs.ucla.edu> wrote:
>
>> Gentian,
>>
>> Probably it would help if you sent your config along. Are you senting packets
>> ToHost/ToHostSniffers? Did you take off the ethernet header before sending
>> the packet ToHost? (That would be a mistake.)
>>
>> E
>>
>>
>> Gentian Jakllari wrote:
>>> Hi,
>>>
>>> I'm trying to get some tcpdump readings from my wireless testbed while it is
>>> running click and dsdv but I only get broadcast packets of "unknown" type.
>>>
>>> Has anyone ran into this?
>>>
>>> Thanks,
>>> Gentian.
>>>
>>> _______________________________________________
>>> click mailing list
>>> click at amsterdam.lcs.mit.edu
>>> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>
More information about the click
mailing list