[Click] Two questions...

[Beyers Cronje]

Hi,

Not sure about (1) but I dont think it is possible. If not I'm sure it wont
be to difficult if you write your own script to do something similar.

For (2), since your frames are not ethernet/ip compliant I would recommend
using the Socket element.

Beyers

On Wed, Jan 27, 2010 at 4:51 PM, <remi.clavier at orange-ftgroup.com> wrote:

>
> 1) it's possible or not to use something like a include directive into my
> router.click file? The includded file would content elementClass or compound
> definitions?
>
> 2) for test, i need to instatiate two differents configuration (to launch
>  ./click myrouter1.click and .click myrouter2.click in two different consol
> and allow to my two differens router to comunique together ( output of
> router connceted to outpout of router2.
> I's possible?
> Wich element may be used at this "intercommuniction port ?
> I precise : I work at user-level end my frames are not ethernet nor ip
> compliant
>
>
> Thanks
>
>
> Rémi
>
> *********************************
> This message and any attachments (the "message") are confidential and
> intended solely for the addressees.
> Any unauthorised use or dissemination is prohibited.
> Messages are susceptible to alteration.
> France Telecom Group shall not be liable for the message if altered,
> changed or falsified.
> If you are not the intended addressee of this message, please cancel it
> immediately and inform the sender.
> ********************************
>
>
> _______________________________________________
> click mailing list
> click at amsterdam.lcs.mit.edu
> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>