[Click] Using click to build an 802.11a MAC layer on USRP2

[Ruben Merz]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

You might want to check the Hydra project: http://hydra.ece.utexas.edu/

On 1/23/10 5:01 PM, Juan Ramon Gutierrez Agullo wrote:
> Hello everyone
> 
> This is my first message here and, of course, I'm a newbie click user. 
> 
> I have an 802.11a transmitter
> (https://www.cgran.org/wiki/ftw80211ofdmtx) running in the USRP2, but it
> only generates a standard-compliant IEEE802.11a/g/p OFDM frame - PHY
> layer.
> Looking at other projects I found the hydra project, and they used click
> to implement the MAC layer (CSMA/CA and DCF). I have some questions and
> I hope you could help me.
> 
> - How can click communicate with GNU Radio?
> 
> - Is there any MAC implementation -by default- with click installation?
> 
> - What's the correct way of beginning a click project? If I want 802.11a
> MAC and I have access to the PHY frame, how I begin the click project?
> 
> Sorry if my questions seems too newbies, but I'm still reading click
> documentation and I've not been able to answer my self-questions yet.
> 
> Thank you,
> 
> Juan R. Gutierrez Agullo 
> 
> _______________________________________________
> click mailing list
> click at amsterdam.lcs.mit.edu
> https://amsterdam.lcs.mit.edu/mailman/listinfo/click

- -- 
Ruben Merz                   Deutsche Telekom Laboratories
http://www.net.t-labs.tu-berlin.de/people/ruben_merz.shtml
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (Darwin)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJLW0B4AAoJEF+2tk4uvSJP+aoIAJWV7/Hlji2fx+rO+Mi94xL+
DzIlOP0Q4bMvZOjShjabXlBh/XJwIRjQ+xEdHBuIupZfKT4XaqynXTv2FtOz4Vu7
0QUBNyeR4NISkBYJ4aqoxG8mTH3id3Ft1S3JjCwboY3F39GYe/wGE7wI0jrNlkXn
fIOLEApmJDc+XnvblrWoyxbd/WZj7tqA/F9tbrawZGOPjDNcz+mk1kbnY3b/kIDT
G0FtK3x2dl0p0YmdCiXDf6tC3pzhqmhy7G3N/WhYV9z8EeXC8Z/Ty8pCuC0F95sG
C3d8nSvgsMNTfjNukhy9dFbB7wp9ks3nBEZAvsZl1ITW4CNPvEHWfHitIrj1zHY=
=fZxn
-----END PGP SIGNATURE-----