[Click] [PATCH] e1000e-0.4.1.7 click polling extension
Joonwoo Park
joonwpark81 at gmail.com
Sat Feb 7 14:42:05 EST 2009
Hey Roman
I had no problem except an issue about the order of driver installation.
I have one 82541PI (e1000) and one 82541PI (e1000e) hardware but my
82541PI device is recognized by e1000 driver as well.
So I always installed e1000e driver first and then installed e1000 driver.
Except that issue, this driver works fine with my previous
e1000-7.6.15.5 driver.
Happy hacking!
Joonwoo
On Sat, Feb 7, 2009 at 11:08 AM, Roman Chertov <rchertov at cs.ucsb.edu> wrote:
> Thanks Joonwoo! I will try out the driver this week. Do you have to remove
> the e1000 from the system? I read on the e1000 list that there is an issue
> having two modules (e1000 and e1000e) for the same device.
>
> Roman
>
> Joonwoo Park wrote:
>>
>> Hello,
>>
>> I'm pleased to release the version of polling patch for the first e1000e
>> driver.
>> Nemean Networks <http://www.nemeannetworks.com> supported this work.
>> Roman Chertov's igb driver made this work more easily.
>>
>> Thanks Nemean Networks and Roman.
>>
>> Please find attached patch and consider to apply this patch Eddie,
>>
>> Thanks,
>> Joonwoo
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> click mailing list
>> click at amsterdam.lcs.mit.edu
>> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>
>
More information about the click
mailing list