[Click] Kernel and Intel Driver Versions and Click Patches
Tom Gibson
tom.gibson at ipvidnet.com
Mon Apr 13 19:22:03 EDT 2009
Joonwoo,
I only just now got in the office to test it. The VPN was giving me
problems yesterday.
The good news is with the patch it doesn't crash anymore. The bad news is
that it seems to generate traffic much slower than expected.
I have 3 Gigabit ports bonded and it seems to max out around 25 MiB/s which
is nowhere near line rate for even a single Gig port.
-Tom
On Sat, Apr 11, 2009 at 10:40 PM, Joonwoo Park <joonwpark81 at gmail.com>wrote:
> Tom, Can you please test this patch?
>
> Eddie, I think the FastUDPSource shouldn't recycle skb until we make
> sure the skb is freed.
> In case of bonddev's hard_start_xmit, it is queuing skb which is
> possible not to freed until next calling of FastUDPSource::pull.
> So this patch makes FastUDPSource::pull to check the skb is good to
> recycle.
>
> BTW, I think the thread problem that I mentioned on this thread wasn't
> problem. It looks like I made a mistake to make a click config.
> Sorry for that.
>
> Joonwoo
>
> On Tue, Apr 7, 2009 at 1:16 PM, Tom Gibson <tom.gibson at ipvidnet.com>
> wrote:
> > Joonwoo,
> >
> > I tried to reply from my phone, but it looks like it didn't work.
> >
> > I looked into this a bit more and found that GDB reports the crash
> happening
> > during execution of line 758 in skbuff.h:
> >
> > static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list)
> > {
> > struct sk_buff *next, *prev, *result;
> >
> > prev = (struct sk_buff *) list;
> > next = prev->next;
> > result = NULL;
> > if (next != prev) {
> > result = next;
> > next = next->next;
> > list->qlen--;
> > next->prev = prev; <-------
> > prev->next = next;
> > result->next = result->prev = NULL;
> > }
> > return result;
> > }
> >
> > Is the code missing a NULL pointer check? Is Linux designed so the
> > sk_buff->next field is always suposed to be a valid pointer?
> >
> > This latest test was using the click 1.7 rc1 version + your patches for
> > E1000e NAPI polling mode. I migrated your posted patch to a new patch
> file
> > for the 1.7 rc1 version. It's actually my first time making a patch file
> > :)
> >
> > The E1000e driver is doing good so far. If I set my click config to use
> 4
> > seperate UDP blasters, working on individual ethX ports, I don't get any
> > crash and it goes fine at 4gbps. Gnome's System Monitor wont stay open
> if
> > you go over 400MiB/s though lol.
> >
> > I'm wondering if the crash could be from something patched in a newer
> kernel
> > version. I'm learning a bit about diffutils, but I'm still not ready to
> > attempt porting the click patches to the latest kernel. I guess I can at
> > least get the latest stable kernel and do a diff on skbuff.h.
> >
> > If you have any other tips or want me to run some test(s), let me know.
> >
> > Thanks,
> >
> > Tom
> >
> >
> > On Mon, Apr 6, 2009 at 8:58 PM, Tom Gibson <tom.gibson at ipvidnet.com>
> wrote:
> >>
> >> I'll find out tomorrow and send you an e-mail.
> >>
> >> That's some good info on how to get the source code line. Thanks.
> >>
> >> -Tom
> >>
> >> On Mon, Apr 6, 2009 at 8:50 PM, Joonwoo Park <joonwpark81 at gmail.com>
> >> wrote:
> >>>
> >>> Hi Tom
> >>>
> >>> On Mon, Apr 6, 2009 at 7:56 PM, Tom Gibson <tom.gibson at ipvidnet.com>
> >>> wrote:
> >>> > It's easy to reproduce. It happens within a second of installing
> Click
> >>> > if I
> >>> > use the bonding driver and transmit too fast. It's a 2x quad-core
> >>> > server so
> >>> > I don't know if the SMP characteristics will be a lot different than
> a
> >>> > single quadcore.
> >>> >
> >>> > I can setup remote access to my servers through a VPN if you're
> >>> > interested.
> >>> > I'm not sure the best way to debug this type of Kernel thing. I've
> >>> > been
> >>> > wondering about using GDB stubs through an RS232 cable or something.
> >>> >
> >>>
> >>> FYI, you can know the exact source code line with following steps
> >>> go to linux dir
> >>> $ make menuconfig -> kernel hacking -> select 'Compile the kernel with
> >>> debug info' and 'Compile the kernel with frame pointer'
> >>> then build linux, install and then reboot with new kernel
> >>> go to click dir
> >>> do configure again with same configure command line which you have been
> >>> using
> >>> $ make clean
> >>> $ make install
> >>> and run click with your config file.
> >>>
> >>> And if you can get kernel oops again
> >>> $ gdb vmlinux (if the oops occurs from kernel itself)
> >>> or
> >>> $ gdb click.ko (if the oops occurs from click itself but your previous
> >>> call stack said that the oops came from kernel)
> >>>
> >>> from gdb shell type:
> >>> info line *<address of function> (ie. from your dump, type: info line
> >>> *pfifo_fast_dequeue+0x48)
> >>>
> >>> Hopefully will give you a hint. Please let me know which line is
> making
> >>> oops.
> >>>
> >>> Joonwoo
> >>>
> >>> > -Tom
> >>> >
> >>> > On Mon, Apr 6, 2009 at 5:14 PM, Joonwoo Park <joonwpark81 at gmail.com>
> >>> > wrote:
> >>> >>
> >>> >> Hi folks,
> >>> >>
> >>> >> I've tried to reproduce kernel oops with your kernel config and
> click
> >>> >> config.
> >>> >> However I couldn't reproduce kernel oops unfortunately. I was
> >>> >> guessing bonded device cause a problem.
> >>> >> But for me I didn't happen. I'm using qemu to test click at this
> time
> >>> >> because I'm not seeing any hardware specific involvement with your
> >>> >> call stack trace. (but probably I'm wrong)
> >>> >> Tom, does the problem (kernel oops) is always repeatable?
> >>> >>
> >>> >> BTW, I think we have another problem or possible regression.
> >>> >> With the latest git version of click, although I'm using single
> >>> >> threaded config with SMP linux. I can see ToDevice which stops
> >>> >> pulling packets in few minutes.
> >>> >> I believed that we (actually Eddie) had fixed this problem few
> months
> >>> >> ago completely, but it looks like we hadn't :-(
> >>> >> Eddie, do you have any idea?
> >>> >>
> >>> >> Joonwoo
> >>> >>
> >>> >> On Thu, Apr 2, 2009 at 8:45 PM, Tom Gibson <tom.gibson at ipvidnet.com
> >
> >>> >> wrote:
> >>> >> > I didn't get around to patching my driver for polling mode yet,
> but
> >>> >> > I
> >>> >> > did
> >>> >> > try adding a FromDevice() -> Discard line to my config. Using the
> >>> >> > bonding
> >>> >> > ethernet device, it didn't help, the Kernel still locked up.
> >>> >> >
> >>> >> > After rebooting I tried running a seperate UDP traffic generator
> for
> >>> >> > each
> >>> >> > individual eth device (all using E1000 driver) also with the
> >>> >> > FromDevice
> >>> >> > line
> >>> >> > included. I was happy to see this worked. Tomorrow when back in
> >>> >> > the
> >>> >> > office
> >>> >> > I'll report if removing the FromDevice line causes the Kernel to
> >>> >> > crash
> >>> >> > or
> >>> >> > not. Hopefully I'll also get migrated to the patched E1000e
> driver
> >>> >> > to.
> >>> >> >
> >>> >> > -Tom
> >>> >> >
> >>> >> > On Thu, Apr 2, 2009 at 8:45 AM, Joonwoo Park <
> joonwpark81 at gmail.com>
> >>> >> > wrote:
> >>> >> >>
> >>> >> >> On Thu, Apr 2, 2009 at 12:44 AM, Tom Gibson
> >>> >> >> <tom.gibson at ipvidnet.com>
> >>> >> >> wrote:
> >>> >> >> > Ok. Thanks Joonwoo. I guess I read your name wrong before,
> >>> >> >> > sorry.
> >>> >> >> > :)
> >>> >> >> >
> >>> >> >>
> >>> >> >> Never mind Tom :-)
> >>> >> >>
> >>> >> >> > Does it matter that I haven't applied the polling mode patch to
> >>> >> >> > my
> >>> >> >> > E1000
> >>> >> >> > driver? Will PollDevice work correctly regardless? I'm just
> >>> >> >> > using
> >>> >> >> > the
> >>> >> >> > driver that came with the Kernel, although NAPI is enabled.
> >>> >> >> >
> >>> >> >>
> >>> >> >> Yes it does. To use PollDevice element you should patch your
> e1000
> >>> >> >> driver.
> >>> >> >> There are bunch of patches for the e1000 driver.
> >>> >> >> You could you patch from click git for older version of e1000
> >>> >> >> driver.
> >>> >> >> Otherwise you can unofficial version of patches.
> >>> >> >> I released both of e1000, e1000e driver on the list.
> >>> >> >>
> >>> >> >> > I hadn't thought about it until now. How does polling mode
> work
> >>> >> >> > with
> >>> >> >> > the
> >>> >> >> > bonding ethernet driver? I wonder if that needs a special
> >>> >> >> > polling
> >>> >> >> > mode
> >>> >> >> > patch to run in Click with optimal performance.
> >>> >> >> >
> >>> >> >>
> >>> >> >> Unfortunately you cannot use linux bonding under click polling
> >>> >> >> mode.
> >>> >> >> You should use FromDevice. eg) FromDevice(bond0).
> >>> >> >> Otherwise you may write your own bonding element for click to
> >>> >> >> implement your own bonding system to use PollDevice
> >>> >> >>
> >>> >> >> Joonwoo
> >>> >> >>
> >>> >> >> > -Tom
> >>> >> >> >
> >>> >> >> > On Wed, Apr 1, 2009 at 10:36 PM, Joonwoo Park
> >>> >> >> > <joonwpark81 at gmail.com>
> >>> >> >> > wrote:
> >>> >> >> >>
> >>> >> >> >> The PollDevice might help you to *evade* your problem.
> >>> >> >> >> But it looks like click has a bug which we have to fix.
> >>> >> >> >>
> >>> >> >> >> Generally speaking.
> >>> >> >> >> PollDevice performs much better performance than FromDevice.
> >>> >> >> >> And it uses other mechanism compare to FromDevice.
> >>> >> >> >> In your case, as Roman pointed out, if you try to put
> >>> >> >> >> PollDevice,
> >>> >> >> >> even
> >>> >> >> >> if it does nothing except drops packets will change your
> >>> >> >> >> router's
> >>> >> >> >> behavior.
> >>> >> >> >>
> >>> >> >> >> BTW, I'm Joonwoo :-)
> >>> >> >> >>
> >>> >> >> >> On Wed, Apr 1, 2009 at 10:24 PM, Tom Gibson
> >>> >> >> >> <tom.gibson at ipvidnet.com>
> >>> >> >> >> wrote:
> >>> >> >> >> > Ok, I'll give that a try tomorrow when I'm at the office. I
> >>> >> >> >> > really
> >>> >> >> >> > appreciate the help from you and Johnwoo. I never would
> have
> >>> >> >> >> > thought
> >>> >> >> >> > of
> >>> >> >> >> > having to include PollDevice(). I'll hopefully get around
> to
> >>> >> >> >> > trying
> >>> >> >> >> > Johnwoo's E1000e driver patch very soon.
> >>> >> >> >> >
> >>> >> >> >> > Do you know the reason why PollDevice is required? Does it
> >>> >> >> >> > cause
> >>> >> >> >> > some
> >>> >> >> >> > FIFO
> >>> >> >> >> > / queue to fill up which then causes problems? My setup may
> >>> >> >> >> > have
> >>> >> >> >> > been
> >>> >> >> >> > getting back tons of destination port unreachable packets
> >>> >> >> >> > which I
> >>> >> >> >> > hadn't
> >>> >> >> >> > thought about.
> >>> >> >> >> >
> >>> >> >> >> > -Tom
> >>> >> >> >> >
> >>> >> >> >> > On Wed, Apr 1, 2009 at 7:03 PM, Roman Chertov
> >>> >> >> >> > <rchertov at cs.ucsb.edu>
> >>> >> >> >> > wrote:
> >>> >> >> >> >>
> >>> >> >> >> >> Change your config to use PollDevice. That should enable
> >>> >> >> >> >> polling
> >>> >> >> >> >> on
> >>> >> >> >> >> the
> >>> >> >> >> >> interface. (You have to do it this way, even if you don't
> >>> >> >> >> >> care
> >>> >> >> >> >> about
> >>> >> >> >> >> receiving packets)
> >>> >> >> >> >>
> >>> >> >> >> >> elementclass UDPGen {
> >>> >> >> >> >> $device, $rate, $limit, $size,
> >>> >> >> >> >> $seth, $sip, $sport, $deth, $dip, $dport |
> >>> >> >> >> >>
> >>> >> >> >> >> srcudp :: FastUDPSource($rate, $limit, $size, $seth, $sip,
> >>> >> >> >> >> $sport,
> >>> >> >> >> >> $deth, $dip,
> >>> >> >> >> >> $dport);
> >>> >> >> >> >> srcudp -> td :: ToDevice($device);
> >>> >> >> >> >> PollDevice($device) -> Discard;
> >>> >> >> >> >> }
> >>> >> >> >> >>
> >>> >> >> >> >> Roman
> >>> >> >> >> >>
> >>> >> >> >> >> Tom Gibson wrote:
> >>> >> >> >> >>>
> >>> >> >> >> >>> Here's my click config. It's a slightly modified version
> of
> >>> >> >> >> >>> the
> >>> >> >> >> >>> UDP
> >>> >> >> >> >>> blaster script.
> >>> >> >> >> >>>
> >>> >> >> >> >>>
> >>> >> >> >> >>> elementclass UDPGen {
> >>> >> >> >> >>> $device, $rate, $limit, $size,
> >>> >> >> >> >>> $seth, $sip, $sport, $deth, $dip, $dport |
> >>> >> >> >> >>>
> >>> >> >> >> >>> srcudp :: FastUDPSource($rate, $limit, $size, $seth,
> $sip,
> >>> >> >> >> >>> $sport,
> >>> >> >> >> >>> $deth,
> $dip,
> >>> >> >> >> >>> $dport);
> >>> >> >> >> >>> srcudp -> td :: ToDevice($device);
> >>> >> >> >> >>> }
> >>> >> >> >> >>>
> >>> >> >> >> >>> /* using 1362 byte packets
> >>> >> >> >> >>> 1gbps = 91777 pkts/sec
> >>> >> >> >> >>> 2gbps = 183554 pkts/sec
> >>> >> >> >> >>> 3gbps = 275330 pkts/sec
> >>> >> >> >> >>> 4gbps = 367107 pkts/sec
> >>> >> >> >> >>> 5gbps = 458884 pkts/sec
> >>> >> >> >> >>> */
> >>> >> >> >> >>> u :: UDPGen(bond0, 367107, 36710700, 1358,
> >>> >> >> >> >>> 00:1f:c6:6c:d5:ca, 192.168.220.1, 1234,
> >>> >> >> >> >>> 00:1f:c6:23:48:a6, 192.168.220.2, 1234);
> >>> >> >> >> >>>
> >>> >> >> >> >>> On Wed, Apr 1, 2009 at 5:01 PM, Joonwoo Park
> >>> >> >> >> >>> <joonwpark81 at gmail.com
> >>> >> >> >> >>> <mailto:joonwpark81 at gmail.com>> wrote:
> >>> >> >> >> >>>
> >>> >> >> >> >>> Sounds you are using FromDevice.
> >>> >> >> >> >>> Is it possible to post your click config as well?
> >>> >> >> >> >>>
> >>> >> >> >> >>> Joonwoo
> >>> >> >> >> >>>
> >>> >> >> >> >>> On Wed, Apr 1, 2009 at 4:57 PM, Tom Gibson
> >>> >> >> >> >>> <tom.gibson at ipvidnet.com
> >>> >> >> >> >>> <mailto:tom.gibson at ipvidnet.com>> wrote:
> >>> >> >> >> >>> > Sorry for the delayed response. I've been out of
> the
> >>> >> >> >> >>> office
> >>> >> >> >> >>> a
> >>> >> >> >> >>> lot and when
> >>> >> >> >> >>> > I first got this the PC running Click wasn't on the
> >>> >> >> >> >>> Internet.
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > I was / am running the E1000 driver that comes in
> the
> >>> >> >> >> >>> 2.6.24-7
> >>> >> >> >> >>> Kernel. The
> >>> >> >> >> >>> > Kernel is the same as on kernel.org
> >>> >> >> >> >>> <http://kernel.org>
> >>> >> >> >> >>> except
> >>> >> >> >> >>> for the click patch was applied.
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > Below is my config I used to build the Kernel:
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Automatically generated make config: don't edit
> >>> >> >> >> >>> > # Linux kernel version: 2.6.24.7
> >>> >> >> >> >>> > # Tue Mar 10 17:46:31 2009
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_64BIT=y
> >>> >> >> >> >>> > # CONFIG_X86_32 is not set
> >>> >> >> >> >>> > CONFIG_X86_64=y
> >>> >> >> >> >>> > CONFIG_X86=y
> >>> >> >> >> >>> > CONFIG_GENERIC_TIME=y
> >>> >> >> >> >>> > CONFIG_GENERIC_CMOS_UPDATE=y
> >>> >> >> >> >>> > CONFIG_CLOCKSOURCE_WATCHDOG=y
> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS=y
> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> >>> >> >> >> >>> > CONFIG_LOCKDEP_SUPPORT=y
> >>> >> >> >> >>> > CONFIG_STACKTRACE_SUPPORT=y
> >>> >> >> >> >>> > CONFIG_SEMAPHORE_SLEEPERS=y
> >>> >> >> >> >>> > CONFIG_MMU=y
> >>> >> >> >> >>> > CONFIG_ZONE_DMA=y
> >>> >> >> >> >>> > # CONFIG_QUICKLIST is not set
> >>> >> >> >> >>> > CONFIG_GENERIC_ISA_DMA=y
> >>> >> >> >> >>> > CONFIG_GENERIC_IOMAP=y
> >>> >> >> >> >>> > CONFIG_GENERIC_BUG=y
> >>> >> >> >> >>> > CONFIG_GENERIC_HWEIGHT=y
> >>> >> >> >> >>> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> >>> >> >> >> >>> > CONFIG_DMI=y
> >>> >> >> >> >>> > CONFIG_RWSEM_GENERIC_SPINLOCK=y
> >>> >> >> >> >>> > # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
> >>> >> >> >> >>> > # CONFIG_ARCH_HAS_ILOG2_U32 is not set
> >>> >> >> >> >>> > # CONFIG_ARCH_HAS_ILOG2_U64 is not set
> >>> >> >> >> >>> > CONFIG_GENERIC_CALIBRATE_DELAY=y
> >>> >> >> >> >>> > CONFIG_GENERIC_TIME_VSYSCALL=y
> >>> >> >> >> >>> > CONFIG_ARCH_SUPPORTS_OPROFILE=y
> >>> >> >> >> >>> > CONFIG_ZONE_DMA32=y
> >>> >> >> >> >>> > CONFIG_ARCH_POPULATES_NODE_MAP=y
> >>> >> >> >> >>> > CONFIG_AUDIT_ARCH=y
> >>> >> >> >> >>> > CONFIG_GENERIC_HARDIRQS=y
> >>> >> >> >> >>> > CONFIG_GENERIC_IRQ_PROBE=y
> >>> >> >> >> >>> > CONFIG_GENERIC_PENDING_IRQ=y
> >>> >> >> >> >>> > CONFIG_X86_HT=y
> >>> >> >> >> >>> > # CONFIG_KTIME_SCALAR is not set
> >>> >> >> >> >>> >
> >>> >> >> >> >>>
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # General setup
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_EXPERIMENTAL=y
> >>> >> >> >> >>> > CONFIG_LOCK_KERNEL=y
> >>> >> >> >> >>> > CONFIG_INIT_ENV_ARG_LIMIT=32
> >>> >> >> >> >>> > CONFIG_LOCALVERSION=""
> >>> >> >> >> >>> > # CONFIG_LOCALVERSION_AUTO is not set
> >>> >> >> >> >>> > CONFIG_SWAP=y
> >>> >> >> >> >>> > CONFIG_SYSVIPC=y
> >>> >> >> >> >>> > CONFIG_SYSVIPC_SYSCTL=y
> >>> >> >> >> >>> > CONFIG_POSIX_MQUEUE=y
> >>> >> >> >> >>> > CONFIG_BSD_PROCESS_ACCT=y
> >>> >> >> >> >>> > CONFIG_BSD_PROCESS_ACCT_V3=y
> >>> >> >> >> >>> > CONFIG_TASKSTATS=y
> >>> >> >> >> >>> > CONFIG_TASK_DELAY_ACCT=y
> >>> >> >> >> >>> > CONFIG_TASK_XACCT=y
> >>> >> >> >> >>> > CONFIG_TASK_IO_ACCOUNTING=y
> >>> >> >> >> >>> > CONFIG_USER_NS=y
> >>> >> >> >> >>> > CONFIG_PID_NS=y
> >>> >> >> >> >>> > CONFIG_AUDIT=y
> >>> >> >> >> >>> > CONFIG_AUDITSYSCALL=y
> >>> >> >> >> >>> > CONFIG_AUDIT_TREE=y
> >>> >> >> >> >>> > # CONFIG_IKCONFIG is not set
> >>> >> >> >> >>> > CONFIG_LOG_BUF_SHIFT=17
> >>> >> >> >> >>> > CONFIG_CGROUPS=y
> >>> >> >> >> >>> > # CONFIG_CGROUP_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_CGROUP_NS=y
> >>> >> >> >> >>> > CONFIG_CPUSETS=y
> >>> >> >> >> >>> > CONFIG_FAIR_GROUP_SCHED=y
> >>> >> >> >> >>> > CONFIG_FAIR_USER_SCHED=y
> >>> >> >> >> >>> > # CONFIG_FAIR_CGROUP_SCHED is not set
> >>> >> >> >> >>> > CONFIG_CGROUP_CPUACCT=y
> >>> >> >> >> >>> > CONFIG_SYSFS_DEPRECATED=y
> >>> >> >> >> >>> > CONFIG_PROC_PID_CPUSET=y
> >>> >> >> >> >>> > CONFIG_RELAY=y
> >>> >> >> >> >>> > CONFIG_BLK_DEV_INITRD=y
> >>> >> >> >> >>> > CONFIG_INITRAMFS_SOURCE=""
> >>> >> >> >> >>> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> >>> >> >> >> >>> > CONFIG_SYSCTL=y
> >>> >> >> >> >>> > # CONFIG_EMBEDDED is not set
> >>> >> >> >> >>> > CONFIG_UID16=y
> >>> >> >> >> >>> > CONFIG_SYSCTL_SYSCALL=y
> >>> >> >> >> >>> > CONFIG_KALLSYMS=y
> >>> >> >> >> >>> > # CONFIG_KALLSYMS_ALL is not set
> >>> >> >> >> >>> > # CONFIG_KALLSYMS_EXTRA_PASS is not set
> >>> >> >> >> >>> > CONFIG_HOTPLUG=y
> >>> >> >> >> >>> > CONFIG_PRINTK=y
> >>> >> >> >> >>> > CONFIG_BUG=y
> >>> >> >> >> >>> > CONFIG_ELF_CORE=y
> >>> >> >> >> >>> > CONFIG_BASE_FULL=y
> >>> >> >> >> >>> > CONFIG_FUTEX=y
> >>> >> >> >> >>> > CONFIG_ANON_INODES=y
> >>> >> >> >> >>> > CONFIG_EPOLL=y
> >>> >> >> >> >>> > CONFIG_SIGNALFD=y
> >>> >> >> >> >>> > CONFIG_EVENTFD=y
> >>> >> >> >> >>> > CONFIG_SHMEM=y
> >>> >> >> >> >>> > CONFIG_VM_EVENT_COUNTERS=y
> >>> >> >> >> >>> > CONFIG_SLAB=y
> >>> >> >> >> >>> > # CONFIG_SLUB is not set
> >>> >> >> >> >>> > # CONFIG_SLOB is not set
> >>> >> >> >> >>> > CONFIG_SLABINFO=y
> >>> >> >> >> >>> > CONFIG_RT_MUTEXES=y
> >>> >> >> >> >>> > # CONFIG_TINY_SHMEM is not set
> >>> >> >> >> >>> > CONFIG_BASE_SMALL=0
> >>> >> >> >> >>> > CONFIG_MODULES=y
> >>> >> >> >> >>> > CONFIG_MODULE_UNLOAD=y
> >>> >> >> >> >>> > CONFIG_MODULE_FORCE_UNLOAD=y
> >>> >> >> >> >>> > CONFIG_MODVERSIONS=y
> >>> >> >> >> >>> > # CONFIG_MODULE_SRCVERSION_ALL is not set
> >>> >> >> >> >>> > CONFIG_KMOD=y
> >>> >> >> >> >>> > CONFIG_STOP_MACHINE=y
> >>> >> >> >> >>> > CONFIG_BLOCK=y
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IO_TRACE=y
> >>> >> >> >> >>> > CONFIG_BLK_DEV_BSG=y
> >>> >> >> >> >>> > CONFIG_BLOCK_COMPAT=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IO Schedulers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IOSCHED_NOOP=y
> >>> >> >> >> >>> > CONFIG_IOSCHED_AS=y
> >>> >> >> >> >>> > CONFIG_IOSCHED_DEADLINE=y
> >>> >> >> >> >>> > CONFIG_IOSCHED_CFQ=y
> >>> >> >> >> >>> > # CONFIG_DEFAULT_AS is not set
> >>> >> >> >> >>> > # CONFIG_DEFAULT_DEADLINE is not set
> >>> >> >> >> >>> > CONFIG_DEFAULT_CFQ=y
> >>> >> >> >> >>> > # CONFIG_DEFAULT_NOOP is not set
> >>> >> >> >> >>> > CONFIG_DEFAULT_IOSCHED="cfq"
> >>> >> >> >> >>> > CONFIG_PREEMPT_NOTIFIERS=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Processor type and features
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_TICK_ONESHOT=y
> >>> >> >> >> >>> > CONFIG_NO_HZ=y
> >>> >> >> >> >>> > CONFIG_HIGH_RES_TIMERS=y
> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> >>> >> >> >> >>> > CONFIG_SMP=y
> >>> >> >> >> >>> > CONFIG_X86_PC=y
> >>> >> >> >> >>> > # CONFIG_X86_ELAN is not set
> >>> >> >> >> >>> > # CONFIG_X86_VOYAGER is not set
> >>> >> >> >> >>> > # CONFIG_X86_NUMAQ is not set
> >>> >> >> >> >>> > # CONFIG_X86_SUMMIT is not set
> >>> >> >> >> >>> > # CONFIG_X86_BIGSMP is not set
> >>> >> >> >> >>> > # CONFIG_X86_VISWS is not set
> >>> >> >> >> >>> > # CONFIG_X86_GENERICARCH is not set
> >>> >> >> >> >>> > # CONFIG_X86_ES7000 is not set
> >>> >> >> >> >>> > # CONFIG_X86_VSMP is not set
> >>> >> >> >> >>> > # CONFIG_M386 is not set
> >>> >> >> >> >>> > # CONFIG_M486 is not set
> >>> >> >> >> >>> > # CONFIG_M586 is not set
> >>> >> >> >> >>> > # CONFIG_M586TSC is not set
> >>> >> >> >> >>> > # CONFIG_M586MMX is not set
> >>> >> >> >> >>> > # CONFIG_M686 is not set
> >>> >> >> >> >>> > # CONFIG_MPENTIUMII is not set
> >>> >> >> >> >>> > # CONFIG_MPENTIUMIII is not set
> >>> >> >> >> >>> > # CONFIG_MPENTIUMM is not set
> >>> >> >> >> >>> > # CONFIG_MPENTIUM4 is not set
> >>> >> >> >> >>> > # CONFIG_MK6 is not set
> >>> >> >> >> >>> > # CONFIG_MK7 is not set
> >>> >> >> >> >>> > # CONFIG_MK8 is not set
> >>> >> >> >> >>> > # CONFIG_MCRUSOE is not set
> >>> >> >> >> >>> > # CONFIG_MEFFICEON is not set
> >>> >> >> >> >>> > # CONFIG_MWINCHIPC6 is not set
> >>> >> >> >> >>> > # CONFIG_MWINCHIP2 is not set
> >>> >> >> >> >>> > # CONFIG_MWINCHIP3D is not set
> >>> >> >> >> >>> > # CONFIG_MGEODEGX1 is not set
> >>> >> >> >> >>> > # CONFIG_MGEODE_LX is not set
> >>> >> >> >> >>> > # CONFIG_MCYRIXIII is not set
> >>> >> >> >> >>> > # CONFIG_MVIAC3_2 is not set
> >>> >> >> >> >>> > # CONFIG_MVIAC7 is not set
> >>> >> >> >> >>> > # CONFIG_MPSC is not set
> >>> >> >> >> >>> > CONFIG_MCORE2=y
> >>> >> >> >> >>> > # CONFIG_GENERIC_CPU is not set
> >>> >> >> >> >>> > CONFIG_X86_L1_CACHE_BYTES=64
> >>> >> >> >> >>> > CONFIG_X86_INTERNODE_CACHE_BYTES=64
> >>> >> >> >> >>> > CONFIG_X86_CMPXCHG=y
> >>> >> >> >> >>> > CONFIG_X86_L1_CACHE_SHIFT=6
> >>> >> >> >> >>> > CONFIG_X86_GOOD_APIC=y
> >>> >> >> >> >>> > CONFIG_X86_INTEL_USERCOPY=y
> >>> >> >> >> >>> > CONFIG_X86_USE_PPRO_CHECKSUM=y
> >>> >> >> >> >>> > CONFIG_X86_TSC=y
> >>> >> >> >> >>> > CONFIG_X86_MINIMUM_CPU_FAMILY=64
> >>> >> >> >> >>> > CONFIG_HPET_TIMER=y
> >>> >> >> >> >>> > CONFIG_GART_IOMMU=y
> >>> >> >> >> >>> > CONFIG_CALGARY_IOMMU=y
> >>> >> >> >> >>> > CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
> >>> >> >> >> >>> > CONFIG_SWIOTLB=y
> >>> >> >> >> >>> > CONFIG_NR_CPUS=32
> >>> >> >> >> >>> > CONFIG_SCHED_SMT=y
> >>> >> >> >> >>> > CONFIG_SCHED_MC=y
> >>> >> >> >> >>> > CONFIG_PREEMPT_NONE=y
> >>> >> >> >> >>> > # CONFIG_PREEMPT_VOLUNTARY is not set
> >>> >> >> >> >>> > # CONFIG_PREEMPT is not set
> >>> >> >> >> >>> > # CONFIG_PREEMPT_BKL is not set
> >>> >> >> >> >>> > CONFIG_X86_LOCAL_APIC=y
> >>> >> >> >> >>> > CONFIG_X86_IO_APIC=y
> >>> >> >> >> >>> > CONFIG_X86_MCE=y
> >>> >> >> >> >>> > CONFIG_X86_MCE_INTEL=y
> >>> >> >> >> >>> > CONFIG_X86_MCE_AMD=y
> >>> >> >> >> >>> > CONFIG_MICROCODE=m
> >>> >> >> >> >>> > CONFIG_MICROCODE_OLD_INTERFACE=y
> >>> >> >> >> >>> > CONFIG_X86_MSR=m
> >>> >> >> >> >>> > CONFIG_X86_CPUID=m
> >>> >> >> >> >>> > CONFIG_NUMA=y
> >>> >> >> >> >>> > CONFIG_K8_NUMA=y
> >>> >> >> >> >>> > CONFIG_X86_64_ACPI_NUMA=y
> >>> >> >> >> >>> > # CONFIG_NUMA_EMU is not set
> >>> >> >> >> >>> > CONFIG_NODES_SHIFT=6
> >>> >> >> >> >>> > CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
> >>> >> >> >> >>> > CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
> >>> >> >> >> >>> > CONFIG_ARCH_SPARSEMEM_ENABLE=y
> >>> >> >> >> >>> > CONFIG_SELECT_MEMORY_MODEL=y
> >>> >> >> >> >>> > # CONFIG_FLATMEM_MANUAL is not set
> >>> >> >> >> >>> > # CONFIG_DISCONTIGMEM_MANUAL is not set
> >>> >> >> >> >>> > CONFIG_SPARSEMEM_MANUAL=y
> >>> >> >> >> >>> > CONFIG_SPARSEMEM=y
> >>> >> >> >> >>> > CONFIG_NEED_MULTIPLE_NODES=y
> >>> >> >> >> >>> > CONFIG_HAVE_MEMORY_PRESENT=y
> >>> >> >> >> >>> > # CONFIG_SPARSEMEM_STATIC is not set
> >>> >> >> >> >>> > CONFIG_SPARSEMEM_EXTREME=y
> >>> >> >> >> >>> > CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> >>> >> >> >> >>> > CONFIG_SPARSEMEM_VMEMMAP=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Memory hotplug is currently incompatible with
> >>> >> >> >> >>> Software
> >>> >> >> >> >>> Suspend
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_SPLIT_PTLOCK_CPUS=4
> >>> >> >> >> >>> > CONFIG_MIGRATION=y
> >>> >> >> >> >>> > CONFIG_RESOURCES_64BIT=y
> >>> >> >> >> >>> > CONFIG_ZONE_DMA_FLAG=1
> >>> >> >> >> >>> > CONFIG_BOUNCE=y
> >>> >> >> >> >>> > CONFIG_VIRT_TO_BUS=y
> >>> >> >> >> >>> > CONFIG_MTRR=y
> >>> >> >> >> >>> > CONFIG_SECCOMP=y
> >>> >> >> >> >>> > # CONFIG_CC_STACKPROTECTOR is not set
> >>> >> >> >> >>> > # CONFIG_HZ_100 is not set
> >>> >> >> >> >>> > CONFIG_HZ_250=y
> >>> >> >> >> >>> > # CONFIG_HZ_300 is not set
> >>> >> >> >> >>> > # CONFIG_HZ_1000 is not set
> >>> >> >> >> >>> > CONFIG_HZ=250
> >>> >> >> >> >>> > CONFIG_KEXEC=y
> >>> >> >> >> >>> > # CONFIG_CRASH_DUMP is not set
> >>> >> >> >> >>> > CONFIG_PHYSICAL_START=0x200000
> >>> >> >> >> >>> > # CONFIG_RELOCATABLE is not set
> >>> >> >> >> >>> > CONFIG_PHYSICAL_ALIGN=0x200000
> >>> >> >> >> >>> > CONFIG_HOTPLUG_CPU=y
> >>> >> >> >> >>> > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> >>> >> >> >> >>> > CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Power management options
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_ARCH_HIBERNATION_HEADER=y
> >>> >> >> >> >>> > CONFIG_PM=y
> >>> >> >> >> >>> > # CONFIG_PM_LEGACY is not set
> >>> >> >> >> >>> > # CONFIG_PM_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_PM_SLEEP_SMP=y
> >>> >> >> >> >>> > CONFIG_PM_SLEEP=y
> >>> >> >> >> >>> > CONFIG_SUSPEND_SMP_POSSIBLE=y
> >>> >> >> >> >>> > CONFIG_SUSPEND=y
> >>> >> >> >> >>> > CONFIG_HIBERNATION_SMP_POSSIBLE=y
> >>> >> >> >> >>> > CONFIG_HIBERNATION=y
> >>> >> >> >> >>> > CONFIG_PM_STD_PARTITION=""
> >>> >> >> >> >>> > CONFIG_ACPI=y
> >>> >> >> >> >>> > CONFIG_ACPI_SLEEP=y
> >>> >> >> >> >>> > CONFIG_ACPI_PROCFS=y
> >>> >> >> >> >>> > CONFIG_ACPI_PROCFS_POWER=y
> >>> >> >> >> >>> > CONFIG_ACPI_SYSFS_POWER=y
> >>> >> >> >> >>> > CONFIG_ACPI_PROC_EVENT=y
> >>> >> >> >> >>> > CONFIG_ACPI_AC=m
> >>> >> >> >> >>> > CONFIG_ACPI_BATTERY=m
> >>> >> >> >> >>> > CONFIG_ACPI_BUTTON=m
> >>> >> >> >> >>> > CONFIG_ACPI_VIDEO=m
> >>> >> >> >> >>> > CONFIG_ACPI_FAN=m
> >>> >> >> >> >>> > CONFIG_ACPI_DOCK=m
> >>> >> >> >> >>> > CONFIG_ACPI_BAY=m
> >>> >> >> >> >>> > CONFIG_ACPI_PROCESSOR=m
> >>> >> >> >> >>> > CONFIG_ACPI_HOTPLUG_CPU=y
> >>> >> >> >> >>> > CONFIG_ACPI_THERMAL=m
> >>> >> >> >> >>> > CONFIG_ACPI_NUMA=y
> >>> >> >> >> >>> > CONFIG_ACPI_ASUS=m
> >>> >> >> >> >>> > CONFIG_ACPI_TOSHIBA=m
> >>> >> >> >> >>> > CONFIG_ACPI_BLACKLIST_YEAR=0
> >>> >> >> >> >>> > # CONFIG_ACPI_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_ACPI_EC=y
> >>> >> >> >> >>> > CONFIG_ACPI_POWER=y
> >>> >> >> >> >>> > CONFIG_ACPI_SYSTEM=y
> >>> >> >> >> >>> > CONFIG_X86_PM_TIMER=y
> >>> >> >> >> >>> > CONFIG_ACPI_CONTAINER=m
> >>> >> >> >> >>> > CONFIG_ACPI_SBS=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # CPU Frequency scaling
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_CPU_FREQ=y
> >>> >> >> >> >>> > CONFIG_CPU_FREQ_TABLE=m
> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_CPU_FREQ_STAT=m
> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_STAT_DETAILS is not set
> >>> >> >> >> >>> > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not
> set
> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_USERSPACE=m
> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_ONDEMAND=m
> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # CPUFreq processor drivers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_X86_ACPI_CPUFREQ=m
> >>> >> >> >> >>> > CONFIG_X86_POWERNOW_K8=m
> >>> >> >> >> >>> > CONFIG_X86_POWERNOW_K8_ACPI=y
> >>> >> >> >> >>> > CONFIG_X86_SPEEDSTEP_CENTRINO=m
> >>> >> >> >> >>> > # CONFIG_X86_P4_CLOCKMOD is not set
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # shared options
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
> >>> >> >> >> >>> > # CONFIG_X86_SPEEDSTEP_LIB is not set
> >>> >> >> >> >>> > CONFIG_CPU_IDLE=y
> >>> >> >> >> >>> > CONFIG_CPU_IDLE_GOV_LADDER=y
> >>> >> >> >> >>> > CONFIG_CPU_IDLE_GOV_MENU=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Bus options (PCI etc.)
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_PCI=y
> >>> >> >> >> >>> > CONFIG_PCI_DIRECT=y
> >>> >> >> >> >>> > CONFIG_PCI_MMCONFIG=y
> >>> >> >> >> >>> > CONFIG_PCI_DOMAINS=y
> >>> >> >> >> >>> > # CONFIG_DMAR is not set
> >>> >> >> >> >>> > CONFIG_PCIEPORTBUS=y
> >>> >> >> >> >>> > CONFIG_PCIEAER=y
> >>> >> >> >> >>> > CONFIG_ARCH_SUPPORTS_MSI=y
> >>> >> >> >> >>> > CONFIG_PCI_MSI=y
> >>> >> >> >> >>> > CONFIG_PCI_LEGACY=y
> >>> >> >> >> >>> > # CONFIG_PCI_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_HT_IRQ=y
> >>> >> >> >> >>> > CONFIG_ISA_DMA_API=y
> >>> >> >> >> >>> > CONFIG_K8_NB=y
> >>> >> >> >> >>> > # CONFIG_PCCARD is not set
> >>> >> >> >> >>> > # CONFIG_HOTPLUG_PCI is not set
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Executable file formats / Emulations
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_BINFMT_ELF=y
> >>> >> >> >> >>> > CONFIG_BINFMT_MISC=m
> >>> >> >> >> >>> > CONFIG_IA32_EMULATION=y
> >>> >> >> >> >>> > CONFIG_IA32_AOUT=y
> >>> >> >> >> >>> > CONFIG_COMPAT=y
> >>> >> >> >> >>> > CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> >>> >> >> >> >>> > CONFIG_SYSVIPC_COMPAT=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Networking
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_NET=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Networking options
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_PACKET=y
> >>> >> >> >> >>> > CONFIG_PACKET_MMAP=y
> >>> >> >> >> >>> > CONFIG_UNIX=y
> >>> >> >> >> >>> > CONFIG_XFRM=y
> >>> >> >> >> >>> > CONFIG_XFRM_USER=m
> >>> >> >> >> >>> > # CONFIG_XFRM_SUB_POLICY is not set
> >>> >> >> >> >>> > # CONFIG_XFRM_MIGRATE is not set
> >>> >> >> >> >>> > CONFIG_NET_KEY=m
> >>> >> >> >> >>> > # CONFIG_NET_KEY_MIGRATE is not set
> >>> >> >> >> >>> > CONFIG_INET=y
> >>> >> >> >> >>> > CONFIG_IP_MULTICAST=y
> >>> >> >> >> >>> > CONFIG_IP_ADVANCED_ROUTER=y
> >>> >> >> >> >>> > CONFIG_ASK_IP_FIB_HASH=y
> >>> >> >> >> >>> > # CONFIG_IP_FIB_TRIE is not set
> >>> >> >> >> >>> > CONFIG_IP_FIB_HASH=y
> >>> >> >> >> >>> > CONFIG_IP_MULTIPLE_TABLES=y
> >>> >> >> >> >>> > CONFIG_IP_ROUTE_MULTIPATH=y
> >>> >> >> >> >>> > CONFIG_IP_ROUTE_VERBOSE=y
> >>> >> >> >> >>> > # CONFIG_IP_PNP is not set
> >>> >> >> >> >>> > CONFIG_NET_IPIP=m
> >>> >> >> >> >>> > CONFIG_NET_IPGRE=m
> >>> >> >> >> >>> > CONFIG_NET_IPGRE_BROADCAST=y
> >>> >> >> >> >>> > CONFIG_IP_MROUTE=y
> >>> >> >> >> >>> > CONFIG_IP_PIMSM_V1=y
> >>> >> >> >> >>> > CONFIG_IP_PIMSM_V2=y
> >>> >> >> >> >>> > # CONFIG_ARPD is not set
> >>> >> >> >> >>> > CONFIG_SYN_COOKIES=y
> >>> >> >> >> >>> > CONFIG_INET_AH=m
> >>> >> >> >> >>> > CONFIG_INET_ESP=m
> >>> >> >> >> >>> > CONFIG_INET_IPCOMP=m
> >>> >> >> >> >>> > CONFIG_INET_XFRM_TUNNEL=m
> >>> >> >> >> >>> > CONFIG_INET_TUNNEL=m
> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_TRANSPORT=m
> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_TUNNEL=m
> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_BEET=m
> >>> >> >> >> >>> > CONFIG_INET_LRO=m
> >>> >> >> >> >>> > CONFIG_INET_DIAG=m
> >>> >> >> >> >>> > CONFIG_INET_TCP_DIAG=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_ADVANCED=y
> >>> >> >> >> >>> > CONFIG_TCP_CONG_BIC=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_CUBIC=y
> >>> >> >> >> >>> > CONFIG_TCP_CONG_WESTWOOD=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_HTCP=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_HSTCP=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_HYBLA=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_VEGAS=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_SCALABLE=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_LP=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_VENO=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_YEAH=m
> >>> >> >> >> >>> > CONFIG_TCP_CONG_ILLINOIS=m
> >>> >> >> >> >>> > # CONFIG_DEFAULT_BIC is not set
> >>> >> >> >> >>> > CONFIG_DEFAULT_CUBIC=y
> >>> >> >> >> >>> > # CONFIG_DEFAULT_HTCP is not set
> >>> >> >> >> >>> > # CONFIG_DEFAULT_VEGAS is not set
> >>> >> >> >> >>> > # CONFIG_DEFAULT_WESTWOOD is not set
> >>> >> >> >> >>> > # CONFIG_DEFAULT_RENO is not set
> >>> >> >> >> >>> > CONFIG_DEFAULT_TCP_CONG="cubic"
> >>> >> >> >> >>> > CONFIG_TCP_MD5SIG=y
> >>> >> >> >> >>> > CONFIG_IP_VS=m
> >>> >> >> >> >>> > # CONFIG_IP_VS_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_IP_VS_TAB_BITS=12
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IPVS transport protocol load balancing support
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_TCP=y
> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_UDP=y
> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_ESP=y
> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_AH=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IPVS scheduler
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IP_VS_RR=m
> >>> >> >> >> >>> > CONFIG_IP_VS_WRR=m
> >>> >> >> >> >>> > CONFIG_IP_VS_LC=m
> >>> >> >> >> >>> > CONFIG_IP_VS_WLC=m
> >>> >> >> >> >>> > CONFIG_IP_VS_LBLC=m
> >>> >> >> >> >>> > CONFIG_IP_VS_LBLCR=m
> >>> >> >> >> >>> > CONFIG_IP_VS_DH=m
> >>> >> >> >> >>> > CONFIG_IP_VS_SH=m
> >>> >> >> >> >>> > CONFIG_IP_VS_SED=m
> >>> >> >> >> >>> > CONFIG_IP_VS_NQ=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IPVS application helper
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IP_VS_FTP=m
> >>> >> >> >> >>> > CONFIG_IPV6=m
> >>> >> >> >> >>> > CONFIG_IPV6_PRIVACY=y
> >>> >> >> >> >>> > CONFIG_IPV6_ROUTER_PREF=y
> >>> >> >> >> >>> > CONFIG_IPV6_ROUTE_INFO=y
> >>> >> >> >> >>> > CONFIG_IPV6_OPTIMISTIC_DAD=y
> >>> >> >> >> >>> > CONFIG_INET6_AH=m
> >>> >> >> >> >>> > CONFIG_INET6_ESP=m
> >>> >> >> >> >>> > CONFIG_INET6_IPCOMP=m
> >>> >> >> >> >>> > CONFIG_IPV6_MIP6=m
> >>> >> >> >> >>> > CONFIG_INET6_XFRM_TUNNEL=m
> >>> >> >> >> >>> > CONFIG_INET6_TUNNEL=m
> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_TRANSPORT=m
> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_TUNNEL=m
> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_BEET=m
> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
> >>> >> >> >> >>> > CONFIG_IPV6_SIT=m
> >>> >> >> >> >>> > CONFIG_IPV6_TUNNEL=m
> >>> >> >> >> >>> > CONFIG_IPV6_MULTIPLE_TABLES=y
> >>> >> >> >> >>> > CONFIG_IPV6_SUBTREES=y
> >>> >> >> >> >>> > # CONFIG_NETLABEL is not set
> >>> >> >> >> >>> > CONFIG_NETWORK_SECMARK=y
> >>> >> >> >> >>> > CONFIG_NETFILTER=y
> >>> >> >> >> >>> > # CONFIG_NETFILTER_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_BRIDGE_NETFILTER=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Core Netfilter Configuration
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK_QUEUE=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK_LOG=m
> >>> >> >> >> >>> > # CONFIG_NF_CONNTRACK_ENABLED is not set
> >>> >> >> >> >>> > # CONFIG_NF_CONNTRACK is not set
> >>> >> >> >> >>> > CONFIG_NETFILTER_XTABLES=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_DSCP=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_MARK=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_NFLOG=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_TRACE=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_SECMARK=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_DCCP=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_DSCP=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_ESP=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MAC=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MARK=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_POLICY=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_REALM=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_SCTP=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_STRING=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_TIME=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_U32=m
> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IP: Netfilter Configuration
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IP_NF_QUEUE=m
> >>> >> >> >> >>> > CONFIG_IP_NF_IPTABLES=m
> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_IPRANGE is not set
> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_TOS is not set
> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_RECENT=m
> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_ECN=m
> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_AH=m
> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_TTL=m
> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_OWNER is not set
> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_ADDRTYPE=m
> >>> >> >> >> >>> > CONFIG_IP_NF_FILTER=m
> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_REJECT=m
> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_LOG=m
> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_ULOG=m
> >>> >> >> >> >>> > CONFIG_IP_NF_MANGLE=m
> >>> >> >> >> >>> > # CONFIG_IP_NF_TARGET_TOS is not set
> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_ECN=m
> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_TTL=m
> >>> >> >> >> >>> > CONFIG_IP_NF_RAW=m
> >>> >> >> >> >>> > CONFIG_IP_NF_ARPTABLES=m
> >>> >> >> >> >>> > CONFIG_IP_NF_ARPFILTER=m
> >>> >> >> >> >>> > CONFIG_IP_NF_ARP_MANGLE=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IPv6: Netfilter Configuration (EXPERIMENTAL)
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IP6_NF_QUEUE=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_IPTABLES=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_RT=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_OPTS=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_FRAG=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_HL=m
> >>> >> >> >> >>> > # CONFIG_IP6_NF_MATCH_OWNER is not set
> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_AH=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_MH=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_EUI64=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_FILTER=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_LOG=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_REJECT=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_MANGLE=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_HL=m
> >>> >> >> >> >>> > CONFIG_IP6_NF_RAW=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Bridge: Netfilter Configuration
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_BRIDGE_NF_EBTABLES=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_BROUTE=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_T_FILTER=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_T_NAT=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_802_3=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_AMONG=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ARP=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_IP=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_LIMIT=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_MARK=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_PKTTYPE=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_STP=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_VLAN=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ARPREPLY=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_DNAT=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_MARK_T=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_REDIRECT=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_SNAT=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_LOG=m
> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ULOG=m
> >>> >> >> >> >>> > CONFIG_IP_DCCP=m
> >>> >> >> >> >>> > CONFIG_INET_DCCP_DIAG=m
> >>> >> >> >> >>> > CONFIG_IP_DCCP_ACKVEC=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # DCCP CCIDs Configuration (EXPERIMENTAL)
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IP_DCCP_CCID2=m
> >>> >> >> >> >>> > # CONFIG_IP_DCCP_CCID2_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_IP_DCCP_CCID3=m
> >>> >> >> >> >>> > CONFIG_IP_DCCP_TFRC_LIB=m
> >>> >> >> >> >>> > # CONFIG_IP_DCCP_CCID3_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_IP_DCCP_CCID3_RTO=100
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # DCCP Kernel Hacking
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # CONFIG_IP_DCCP_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_IP_SCTP=m
> >>> >> >> >> >>> > # CONFIG_SCTP_DBG_MSG is not set
> >>> >> >> >> >>> > # CONFIG_SCTP_DBG_OBJCNT is not set
> >>> >> >> >> >>> > # CONFIG_SCTP_HMAC_NONE is not set
> >>> >> >> >> >>> > # CONFIG_SCTP_HMAC_SHA1 is not set
> >>> >> >> >> >>> > CONFIG_SCTP_HMAC_MD5=y
> >>> >> >> >> >>> > CONFIG_TIPC=m
> >>> >> >> >> >>> > CONFIG_TIPC_ADVANCED=y
> >>> >> >> >> >>> > CONFIG_TIPC_ZONES=3
> >>> >> >> >> >>> > CONFIG_TIPC_CLUSTERS=1
> >>> >> >> >> >>> > CONFIG_TIPC_NODES=255
> >>> >> >> >> >>> > CONFIG_TIPC_SLAVE_NODES=0
> >>> >> >> >> >>> > CONFIG_TIPC_PORTS=8191
> >>> >> >> >> >>> > CONFIG_TIPC_LOG=0
> >>> >> >> >> >>> > # CONFIG_TIPC_DEBUG is not set
> >>> >> >> >> >>> > # CONFIG_ATM is not set
> >>> >> >> >> >>> > CONFIG_BRIDGE=m
> >>> >> >> >> >>> > CONFIG_VLAN_8021Q=m
> >>> >> >> >> >>> > # CONFIG_DECNET is not set
> >>> >> >> >> >>> > CONFIG_LLC=m
> >>> >> >> >> >>> > CONFIG_LLC2=m
> >>> >> >> >> >>> > # CONFIG_IPX is not set
> >>> >> >> >> >>> > # CONFIG_ATALK is not set
> >>> >> >> >> >>> > CONFIG_X25=m
> >>> >> >> >> >>> > CONFIG_LAPB=m
> >>> >> >> >> >>> > CONFIG_ECONET=m
> >>> >> >> >> >>> > CONFIG_ECONET_AUNUDP=y
> >>> >> >> >> >>> > CONFIG_ECONET_NATIVE=y
> >>> >> >> >> >>> > CONFIG_WAN_ROUTER=m
> >>> >> >> >> >>> > CONFIG_NET_SCHED=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Queueing/Scheduling
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_NET_SCH_CBQ=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_HTB=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_HFSC=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_PRIO=m
> >>> >> >> >> >>> > # CONFIG_NET_SCH_RR is not set
> >>> >> >> >> >>> > CONFIG_NET_SCH_RED=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_SFQ=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_TEQL=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_TBF=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_GRED=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_DSMARK=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_NETEM=m
> >>> >> >> >> >>> > CONFIG_NET_SCH_INGRESS=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Classification
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_NET_CLS=y
> >>> >> >> >> >>> > CONFIG_NET_CLS_BASIC=m
> >>> >> >> >> >>> > CONFIG_NET_CLS_TCINDEX=m
> >>> >> >> >> >>> > CONFIG_NET_CLS_ROUTE4=m
> >>> >> >> >> >>> > CONFIG_NET_CLS_ROUTE=y
> >>> >> >> >> >>> > CONFIG_NET_CLS_FW=m
> >>> >> >> >> >>> > CONFIG_NET_CLS_U32=m
> >>> >> >> >> >>> > CONFIG_CLS_U32_PERF=y
> >>> >> >> >> >>> > CONFIG_CLS_U32_MARK=y
> >>> >> >> >> >>> > CONFIG_NET_CLS_RSVP=m
> >>> >> >> >> >>> > CONFIG_NET_CLS_RSVP6=m
> >>> >> >> >> >>> > CONFIG_NET_EMATCH=y
> >>> >> >> >> >>> > CONFIG_NET_EMATCH_STACK=32
> >>> >> >> >> >>> > CONFIG_NET_EMATCH_CMP=m
> >>> >> >> >> >>> > CONFIG_NET_EMATCH_NBYTE=m
> >>> >> >> >> >>> > CONFIG_NET_EMATCH_U32=m
> >>> >> >> >> >>> > CONFIG_NET_EMATCH_META=m
> >>> >> >> >> >>> > CONFIG_NET_EMATCH_TEXT=m
> >>> >> >> >> >>> > CONFIG_NET_CLS_ACT=y
> >>> >> >> >> >>> > CONFIG_NET_ACT_POLICE=m
> >>> >> >> >> >>> > CONFIG_NET_ACT_GACT=m
> >>> >> >> >> >>> > CONFIG_GACT_PROB=y
> >>> >> >> >> >>> > CONFIG_NET_ACT_MIRRED=m
> >>> >> >> >> >>> > CONFIG_NET_ACT_IPT=m
> >>> >> >> >> >>> > CONFIG_NET_ACT_NAT=m
> >>> >> >> >> >>> > CONFIG_NET_ACT_PEDIT=m
> >>> >> >> >> >>> > CONFIG_NET_ACT_SIMP=m
> >>> >> >> >> >>> > # CONFIG_NET_CLS_POLICE is not set
> >>> >> >> >> >>> > CONFIG_NET_CLS_IND=y
> >>> >> >> >> >>> > CONFIG_NET_SCH_FIFO=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Network testing
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_NET_PKTGEN=m
> >>> >> >> >> >>> > CONFIG_HAMRADIO=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Packet Radio protocols
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_AX25=m
> >>> >> >> >> >>> > # CONFIG_AX25_DAMA_SLAVE is not set
> >>> >> >> >> >>> > CONFIG_NETROM=m
> >>> >> >> >> >>> > CONFIG_ROSE=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # AX.25 network device drivers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_MKISS=m
> >>> >> >> >> >>> > CONFIG_6PACK=m
> >>> >> >> >> >>> > CONFIG_BPQETHER=m
> >>> >> >> >> >>> > CONFIG_BAYCOM_SER_FDX=m
> >>> >> >> >> >>> > CONFIG_BAYCOM_SER_HDX=m
> >>> >> >> >> >>> > # CONFIG_YAM is not set
> >>> >> >> >> >>> > CONFIG_IRDA=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IrDA protocols
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IRLAN=m
> >>> >> >> >> >>> > CONFIG_IRNET=m
> >>> >> >> >> >>> > CONFIG_IRCOMM=m
> >>> >> >> >> >>> > # CONFIG_IRDA_ULTRA is not set
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IrDA options
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IRDA_CACHE_LAST_LSAP=y
> >>> >> >> >> >>> > CONFIG_IRDA_FAST_RR=y
> >>> >> >> >> >>> > # CONFIG_IRDA_DEBUG is not set
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Infrared-port device drivers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # SIR device drivers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IRTTY_SIR=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Dongle support
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_DONGLE=y
> >>> >> >> >> >>> > CONFIG_ESI_DONGLE=m
> >>> >> >> >> >>> > CONFIG_ACTISYS_DONGLE=m
> >>> >> >> >> >>> > CONFIG_TEKRAM_DONGLE=m
> >>> >> >> >> >>> > CONFIG_TOIM3232_DONGLE=m
> >>> >> >> >> >>> > CONFIG_LITELINK_DONGLE=m
> >>> >> >> >> >>> > CONFIG_MA600_DONGLE=m
> >>> >> >> >> >>> > CONFIG_GIRBIL_DONGLE=m
> >>> >> >> >> >>> > CONFIG_MCP2120_DONGLE=m
> >>> >> >> >> >>> > CONFIG_OLD_BELKIN_DONGLE=m
> >>> >> >> >> >>> > CONFIG_ACT200L_DONGLE=m
> >>> >> >> >> >>> > CONFIG_KINGSUN_DONGLE=m
> >>> >> >> >> >>> > CONFIG_KSDAZZLE_DONGLE=m
> >>> >> >> >> >>> > CONFIG_KS959_DONGLE=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Old SIR device drivers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Old Serial dongle support
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # FIR device drivers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_USB_IRDA=m
> >>> >> >> >> >>> > CONFIG_SIGMATEL_FIR=m
> >>> >> >> >> >>> > CONFIG_NSC_FIR=m
> >>> >> >> >> >>> > CONFIG_WINBOND_FIR=m
> >>> >> >> >> >>> > CONFIG_SMC_IRCC_FIR=m
> >>> >> >> >> >>> > CONFIG_ALI_FIR=m
> >>> >> >> >> >>> > CONFIG_VLSI_FIR=m
> >>> >> >> >> >>> > CONFIG_VIA_FIR=m
> >>> >> >> >> >>> > CONFIG_MCS_FIR=m
> >>> >> >> >> >>> > CONFIG_BT=m
> >>> >> >> >> >>> > CONFIG_BT_L2CAP=m
> >>> >> >> >> >>> > CONFIG_BT_SCO=m
> >>> >> >> >> >>> > CONFIG_BT_RFCOMM=m
> >>> >> >> >> >>> > CONFIG_BT_RFCOMM_TTY=y
> >>> >> >> >> >>> > CONFIG_BT_BNEP=m
> >>> >> >> >> >>> > CONFIG_BT_BNEP_MC_FILTER=y
> >>> >> >> >> >>> > CONFIG_BT_BNEP_PROTO_FILTER=y
> >>> >> >> >> >>> > CONFIG_BT_HIDP=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Bluetooth device drivers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_BT_HCIUSB=m
> >>> >> >> >> >>> > CONFIG_BT_HCIUSB_SCO=y
> >>> >> >> >> >>> > CONFIG_BT_HCIUART=m
> >>> >> >> >> >>> > CONFIG_BT_HCIUART_H4=y
> >>> >> >> >> >>> > CONFIG_BT_HCIUART_BCSP=y
> >>> >> >> >> >>> > CONFIG_BT_HCIUART_LL=y
> >>> >> >> >> >>> > CONFIG_BT_HCIBCM203X=m
> >>> >> >> >> >>> > CONFIG_BT_HCIBPA10X=m
> >>> >> >> >> >>> > CONFIG_BT_HCIBFUSB=m
> >>> >> >> >> >>> > CONFIG_BT_HCIVHCI=m
> >>> >> >> >> >>> > CONFIG_AF_RXRPC=m
> >>> >> >> >> >>> > # CONFIG_AF_RXRPC_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_RXKAD=m
> >>> >> >> >> >>> > CONFIG_FIB_RULES=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Wireless
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_CFG80211=m
> >>> >> >> >> >>> > CONFIG_NL80211=y
> >>> >> >> >> >>> > CONFIG_WIRELESS_EXT=y
> >>> >> >> >> >>> > CONFIG_MAC80211=m
> >>> >> >> >> >>> > CONFIG_MAC80211_RCSIMPLE=y
> >>> >> >> >> >>> > CONFIG_MAC80211_LEDS=y
> >>> >> >> >> >>> > # CONFIG_MAC80211_DEBUGFS is not set
> >>> >> >> >> >>> > # CONFIG_MAC80211_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_IEEE80211=m
> >>> >> >> >> >>> > # CONFIG_IEEE80211_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_IEEE80211_CRYPT_WEP=m
> >>> >> >> >> >>> > CONFIG_IEEE80211_CRYPT_CCMP=m
> >>> >> >> >> >>> > CONFIG_IEEE80211_CRYPT_TKIP=m
> >>> >> >> >> >>> > # CONFIG_IEEE80211_SOFTMAC is not set
> >>> >> >> >> >>> > CONFIG_RFKILL=m
> >>> >> >> >> >>> > CONFIG_RFKILL_INPUT=m
> >>> >> >> >> >>> > CONFIG_RFKILL_LEDS=y
> >>> >> >> >> >>> > CONFIG_NET_9P=m
> >>> >> >> >> >>> > CONFIG_NET_9P_FD=m
> >>> >> >> >> >>> > # CONFIG_NET_9P_DEBUG is not set
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Device Drivers
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Generic Driver Options
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> >>> >> >> >> >>> > CONFIG_STANDALONE=y
> >>> >> >> >> >>> > CONFIG_PREVENT_FIRMWARE_BUILD=y
> >>> >> >> >> >>> > CONFIG_FW_LOADER=m
> >>> >> >> >> >>> > # CONFIG_DEBUG_DRIVER is not set
> >>> >> >> >> >>> > # CONFIG_DEBUG_DEVRES is not set
> >>> >> >> >> >>> > # CONFIG_SYS_HYPERVISOR is not set
> >>> >> >> >> >>> > CONFIG_CONNECTOR=m
> >>> >> >> >> >>> > # CONFIG_MTD is not set
> >>> >> >> >> >>> > # CONFIG_PARPORT is not set
> >>> >> >> >> >>> > CONFIG_PNP=y
> >>> >> >> >> >>> > CONFIG_PNP_DEBUG=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Protocols
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_PNPACPI=y
> >>> >> >> >> >>> > CONFIG_BLK_DEV=y
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_FD is not set
> >>> >> >> >> >>> > CONFIG_BLK_CPQ_DA=m
> >>> >> >> >> >>> > # CONFIG_BLK_CPQ_CISS_DA is not set
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_DAC960 is not set
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_UMEM is not set
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_COW_COMMON is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_LOOP=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_CRYPTOLOOP=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_NBD=m
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_SX8 is not set
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_UB is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_RAM=y
> >>> >> >> >> >>> > CONFIG_BLK_DEV_RAM_COUNT=16
> >>> >> >> >> >>> > CONFIG_BLK_DEV_RAM_SIZE=65536
> >>> >> >> >> >>> > CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
> >>> >> >> >> >>> > # CONFIG_CDROM_PKTCDVD is not set
> >>> >> >> >> >>> > CONFIG_ATA_OVER_ETH=m
> >>> >> >> >> >>> > CONFIG_MISC_DEVICES=y
> >>> >> >> >> >>> > CONFIG_IBM_ASM=m
> >>> >> >> >> >>> > CONFIG_PHANTOM=m
> >>> >> >> >> >>> > CONFIG_EEPROM_93CX6=m
> >>> >> >> >> >>> > CONFIG_SGI_IOC4=m
> >>> >> >> >> >>> > CONFIG_TIFM_CORE=m
> >>> >> >> >> >>> > # CONFIG_TIFM_7XX1 is not set
> >>> >> >> >> >>> > # CONFIG_ASUS_LAPTOP is not set
> >>> >> >> >> >>> > # CONFIG_FUJITSU_LAPTOP is not set
> >>> >> >> >> >>> > # CONFIG_MSI_LAPTOP is not set
> >>> >> >> >> >>> > # CONFIG_SONY_LAPTOP is not set
> >>> >> >> >> >>> > # CONFIG_THINKPAD_ACPI is not set
> >>> >> >> >> >>> > CONFIG_IDE=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDE=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Please see Documentation/ide.txt for help/info on
> >>> >> >> >> >>> IDE
> >>> >> >> >> >>> drives
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_IDE_SATA is not set
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_HD_IDE is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDEDISK=m
> >>> >> >> >> >>> > # CONFIG_IDEDISK_MULTI_MODE is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDECD=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDETAPE=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDEFLOPPY=m
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_IDESCSI is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDEACPI=y
> >>> >> >> >> >>> > # CONFIG_IDE_TASK_IOCTL is not set
> >>> >> >> >> >>> > CONFIG_IDE_PROC_FS=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # IDE chipset support/bugfixes
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_IDE_GENERIC=m
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_PLATFORM is not set
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_CMD640 is not set
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_IDEPNP is not set
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # PCI IDE chipsets support
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDEPCI=y
> >>> >> >> >> >>> > # CONFIG_IDEPCI_SHARE_IRQ is not set
> >>> >> >> >> >>> > # CONFIG_IDEPCI_PCIBUS_ORDER is not set
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_OFFBOARD is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_GENERIC=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_OPTI621=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_RZ1000=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDEDMA_PCI=y
> >>> >> >> >> >>> > CONFIG_BLK_DEV_AEC62XX=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_ALI15X3=m
> >>> >> >> >> >>> > # CONFIG_WDC_ALI15X3 is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_AMD74XX=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_ATIIXP=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_CMD64X=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_TRIFLEX=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_CY82C693=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_CS5520=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_CS5530=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_HPT34X=m
> >>> >> >> >> >>> > # CONFIG_HPT34X_AUTODMA is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_HPT366=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_JMICRON=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_SC1200=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_PIIX=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IT8213=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IT821X=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_NS87415=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_PDC202XX_OLD=m
> >>> >> >> >> >>> > # CONFIG_PDC202XX_BURST is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_PDC202XX_NEW=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_SVWKS=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_SIIMAGE=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_SIS5513=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_SLC90E66=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_TRM290=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_VIA82CXXX=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_TC86C001=m
> >>> >> >> >> >>> > # CONFIG_IDE_ARM is not set
> >>> >> >> >> >>> > CONFIG_BLK_DEV_IDEDMA=y
> >>> >> >> >> >>> > CONFIG_IDE_ARCH_OBSOLETE_INIT=y
> >>> >> >> >> >>> > # CONFIG_BLK_DEV_HD is not set
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # SCSI device support
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_RAID_ATTRS=m
> >>> >> >> >> >>> > CONFIG_SCSI=m
> >>> >> >> >> >>> > CONFIG_SCSI_DMA=y
> >>> >> >> >> >>> > CONFIG_SCSI_TGT=m
> >>> >> >> >> >>> > CONFIG_SCSI_NETLINK=y
> >>> >> >> >> >>> > CONFIG_SCSI_PROC_FS=y
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # SCSI support type (disk, tape, CD-ROM)
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_BLK_DEV_SD=m
> >>> >> >> >> >>> > CONFIG_CHR_DEV_ST=m
> >>> >> >> >> >>> > CONFIG_CHR_DEV_OSST=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_SR=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_SR_VENDOR=y
> >>> >> >> >> >>> > CONFIG_CHR_DEV_SG=m
> >>> >> >> >> >>> > CONFIG_CHR_DEV_SCH=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # Some SCSI devices (e.g. CD jukebox) support
> multiple
> >>> >> >> >> >>> LUNs
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_SCSI_MULTI_LUN=y
> >>> >> >> >> >>> > CONFIG_SCSI_CONSTANTS=y
> >>> >> >> >> >>> > CONFIG_SCSI_LOGGING=y
> >>> >> >> >> >>> > CONFIG_SCSI_SCAN_ASYNC=y
> >>> >> >> >> >>> > CONFIG_SCSI_WAIT_SCAN=m
> >>> >> >> >> >>> >
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > # SCSI Transports
> >>> >> >> >> >>> > #
> >>> >> >> >> >>> > CONFIG_SCSI_SPI_ATTRS=m
> >>> >> >> >> >>> > CONFIG_SCSI_FC_ATTRS=m
> >>> >> >> >> >>> > CONFIG_SCSI_FC_TGT_ATTRS=y
> >>> >> >> >> >>> > CONFIG_SCSI_ISCSI_ATTRS=m
> >>> >> >> >> >>> > CONFIG_SCSI_SAS_ATTRS=m
> >>> >> >> >> >>> > CONFIG_SCSI_SAS_LIBSAS=m
> >>> >> >> >> >>> > CONFIG_SCSI_SAS_ATA=y
> >>> >> >> >> >>> > # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_SCSI_SRP_ATTRS=m
> >>> >> >> >> >>> > CONFIG_SCSI_SRP_TGT_ATTRS=y
> >>> >> >> >> >>> > CONFIG_SCSI_LOWLEVEL=y
> >>> >> >> >> >>> > CONFIG_ISCSI_TCP=m
> >>> >> >> >> >>> > CONFIG_BLK_DEV_3W_XXXX_RAID=m
> >>> >> >> >> >>> > CONFIG_SCSI_3W_9XXX=m
> >>> >> >> >> >>> > CONFIG_SCSI_ACARD=m
> >>> >> >> >> >>> > CONFIG_SCSI_AACRAID=m
> >>> >> >> >> >>> > CONFIG_SCSI_AIC7XXX=m
> >>> >> >> >> >>> > CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
> >>> >> >> >> >>> > CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> >>> >> >> >> >>> > CONFIG_AIC7XXX_DEBUG_ENABLE=y
> >>> >> >> >> >>> > CONFIG_AIC7XXX_DEBUG_MASK=0
> >>> >> >> >> >>> > CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
> >>> >> >> >> >>> > CONFIG_SCSI_AIC7XXX_OLD=m
> >>> >> >> >> >>> > CONFIG_SCSI_AIC79XX=m
> >>> >> >> >> >>> > CONFIG_AIC79XX_CMDS_PER_DEVICE=32
> >>> >> >> >> >>> > CONFIG_AIC79XX_RESET_DELAY_MS=15000
> >>> >> >> >> >>> > CONFIG_AIC79XX_DEBUG_ENABLE=y
> >>> >> >> >> >>> > CONFIG_AIC79XX_DEBUG_MASK=0
> >>> >> >> >> >>> > CONFIG_AIC79XX_REG_PRETTY_PRINT=y
> >>> >> >> >> >>> > CONFIG_SCSI_AIC94XX=m
> >>> >> >> >> >>> > # CONFIG_AIC94XX_DEBUG is not set
> >>> >> >> >> >>> > CONFIG_SCSI_ADVANSYS=m
> >>> >> >> >> >>> > CONFIG_SCSI_ARCMSR=m
> >>> >> >> >> >>> > # CONFIG_SCSI_ARCMSR_AER is not set
> >>> >> >> >> >>> > CONFIG_MEGARAID_NEWGEN=y
> >>> >> >> >> >>> > CONFIG_MEGARAID_MM=m
> >>> >> >> >> >>> > CONFIG_MEGARAID_MAILBOX=m
> >>> >> >> >> >>> > CONFIG_MEGARAID_LEGACY=m
> >>> >> >> >> >>> > CONFIG_MEGARAID_SAS=m
> >>> >> >> >> >>> > CONFIG_SCSI_HPTIOP=m
> >>> >> >> >> >>> > CONFIG_SCSI_BUSLOGIC=m
> >>> >> >> >> >>> > # CONFIG_SCSI_OMIT_FLASHPOINT is not set
> >>> >> >> >> >>> > CONFIG_SCSI_DMX3191D=m
> >>> >> >> >> >>> > CONFIG_SCSI_EATA=m
> >>> >> >> >> >>> > CONFIG_SCSI_EATA_TAGGED_QUEUE=y
> >>> >> >> >> >>> > CONFIG_SCSI_EATA_LINKED_COMMANDS=y
> >>> >> >> >> >>> > CONFIG_SCSI_EATA_MAX_TAGS=16
> >>> >> >> >> >>> > CONFIG_SCSI_FUTURE_DOMAIN=m
> >>> >> >> >> >>> > CONFIG_SCSI_GDTH=m
> >>> >> >> >> >>> > CONFIG_SCSI_IPS=m
> >>> >> >> >> >>> > CONFIG_SCSI_INITIO=m
> >>> >> >> >> >>> > CONFIG_SCSI_INIA100=m
> >>> >> >> >> >>> > CONFIG_SCSI_STEX=m
> >>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_2=m
> >>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> >>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> >>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> >>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_MMIO=y
> >>> >> >> >> >>> > CONFIG_SCSI_IPR=m
> >>> >> >> >> >>> > # CONFIG_SCSI_IPR_TRACE is not set
> >>> >> >> >> >>> > # CONFIG_SCSI_IPR_DUMP is not set
> >>> >> >> >> >>> > CONFIG_SCSI_QLOGIC_1280=m
> >>> >> >> >> >>> > CONFIG_SCSI_QLA_FC=m
> >>> >> >> >> >>> > CONFIG_SCSI_QLA_ISCSI=m
> >>> >> >> >> >>> > CONFIG_SCSI_LPFC=m
> >>> >> >> >> >>> > CONFIG_SCSI_DC395x=m
> >>> >> >> >> >>> > CONFIG_SCSI_DC390T=m
> >>> >> >> >> >>> > CONFIG_SCSI_DEBUG=m
> >>> >> >> >> >>> > CONFIG_SCSI_SRP=m
> >>> >> >> >> >>> > CONFIG_ATA=m
> >>> >> >> >> >>> > # CONFIG_ATA_NONSTANDARD is not set
> >>> >> >> >> >>> > CONFIG_ATA_ACPI=y
> >>> >> >> >> >>> > CONFIG_SATA_AHCI=m
> >>> >> >> >> >>> > CONFIG_SATA_SVW=m
> >>> >> >> >> >>> > CONFIG_ATA_PIIX=m
> >>> >> >> >> >>> > CONFIG_SATA_MV=m
> >>> >> >> >> >>> > CONFIG_SATA_NV=m
> >>> >> >> >> >>> > CONFIG_PDC_ADMA=m
> >>> >> >> >> >>> > CONFIG_SATA_QSTOR=m
> >>> >> >> >> >>> > CONFIG_SATA_PROMISE=m
> >>> >> >> >> >>> > CONFIG_SATA_SX4=m
> >>> >> >> >> >>> > CONFIG_SATA_SIL=m
> >>> >> >> >> >>> > CONFIG_SATA_SIL24=m
> >>> >> >> >> >>> > CONFIG_SATA_SIS=m
> >>> >> >> >> >>> > CONFIG_SATA_ULI=m
> >>> >> >> >> >>> > CONFIG_SATA_VIA=m
> >>> >> >> >> >>> > CONFIG_SATA_VITESSE=m
> >>> >> >> >> >>> > CONFIG_SATA_INIC162X=m
> >>> >> >> >> >>> > # CONFIG_PATA_ACPI is not set
> >>> >> >> >> >>> > # CONFIG_PATA_ALI is not set
> >>> >> >> >> >>> > # CONFIG_PATA_AMD is not set
> >>> >> >> >> >>> > CONFIG_PATA_ARTOP=m
> >>> >> >> >> >>> > # CONFIG_PATA_ATIIXP is not set
> >>> >> >> >> >>> > # CONFIG_PATA_CMD640_PCI is not set
> >>> >> >> >> >>> > # CONFIG_PATA_CMD64X is not set
> >>> >> >> >> >>> > # CONFIG_PATA_CS5520 is not set
> >>> >> >> >> >>> > # CONFIG_PATA_CS5530 is not set
> >>> >> >> >> >>> > # CONFIG_PATA_CYPRESS is not set
> >>> >> >> >> >>> > # CONFIG_PATA_EFAR is not set
> >>> >> >> >> >>> > CONFIG_ATA_GENERIC=m
> >>> >> >> >> >>> > # CONFIG_PATA_HPT366 is not set
> >>> >> >> >> >>> > # CONFIG_PATA_HPT37X is not set
> >>> >> >> >> >>> > # CONFIG_PATA_HPT3X2N is not set
> >>> >> >> >> >>> > # CONFIG_PATA_HPT3X3 is not set
> >>> >> >> >> >>> > # CONFIG_PATA_IT821X is not set
> >>> >> >> >> >>>
>
More information about the click
mailing list