[Click] Kernel and Intel Driver Versions and Click Patches
Joonwoo Park
joonwpark81 at gmail.com
Sun Apr 12 01:40:03 EDT 2009
Tom, Can you please test this patch?
Eddie, I think the FastUDPSource shouldn't recycle skb until we make
sure the skb is freed.
In case of bonddev's hard_start_xmit, it is queuing skb which is
possible not to freed until next calling of FastUDPSource::pull.
So this patch makes FastUDPSource::pull to check the skb is good to recycle.
BTW, I think the thread problem that I mentioned on this thread wasn't
problem. It looks like I made a mistake to make a click config.
Sorry for that.
Joonwoo
On Tue, Apr 7, 2009 at 1:16 PM, Tom Gibson <tom.gibson at ipvidnet.com> wrote:
> Joonwoo,
>
> I tried to reply from my phone, but it looks like it didn't work.
>
> I looked into this a bit more and found that GDB reports the crash happening
> during execution of line 758 in skbuff.h:
>
> static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list)
> {
> struct sk_buff *next, *prev, *result;
>
> prev = (struct sk_buff *) list;
> next = prev->next;
> result = NULL;
> if (next != prev) {
> result = next;
> next = next->next;
> list->qlen--;
> next->prev = prev; <-------
> prev->next = next;
> result->next = result->prev = NULL;
> }
> return result;
> }
>
> Is the code missing a NULL pointer check? Is Linux designed so the
> sk_buff->next field is always suposed to be a valid pointer?
>
> This latest test was using the click 1.7 rc1 version + your patches for
> E1000e NAPI polling mode. I migrated your posted patch to a new patch file
> for the 1.7 rc1 version. It's actually my first time making a patch file
> :)
>
> The E1000e driver is doing good so far. If I set my click config to use 4
> seperate UDP blasters, working on individual ethX ports, I don't get any
> crash and it goes fine at 4gbps. Gnome's System Monitor wont stay open if
> you go over 400MiB/s though lol.
>
> I'm wondering if the crash could be from something patched in a newer kernel
> version. I'm learning a bit about diffutils, but I'm still not ready to
> attempt porting the click patches to the latest kernel. I guess I can at
> least get the latest stable kernel and do a diff on skbuff.h.
>
> If you have any other tips or want me to run some test(s), let me know.
>
> Thanks,
>
> Tom
>
>
> On Mon, Apr 6, 2009 at 8:58 PM, Tom Gibson <tom.gibson at ipvidnet.com> wrote:
>>
>> I'll find out tomorrow and send you an e-mail.
>>
>> That's some good info on how to get the source code line. Thanks.
>>
>> -Tom
>>
>> On Mon, Apr 6, 2009 at 8:50 PM, Joonwoo Park <joonwpark81 at gmail.com>
>> wrote:
>>>
>>> Hi Tom
>>>
>>> On Mon, Apr 6, 2009 at 7:56 PM, Tom Gibson <tom.gibson at ipvidnet.com>
>>> wrote:
>>> > It's easy to reproduce. It happens within a second of installing Click
>>> > if I
>>> > use the bonding driver and transmit too fast. It's a 2x quad-core
>>> > server so
>>> > I don't know if the SMP characteristics will be a lot different than a
>>> > single quadcore.
>>> >
>>> > I can setup remote access to my servers through a VPN if you're
>>> > interested.
>>> > I'm not sure the best way to debug this type of Kernel thing. I've
>>> > been
>>> > wondering about using GDB stubs through an RS232 cable or something.
>>> >
>>>
>>> FYI, you can know the exact source code line with following steps
>>> go to linux dir
>>> $ make menuconfig -> kernel hacking -> select 'Compile the kernel with
>>> debug info' and 'Compile the kernel with frame pointer'
>>> then build linux, install and then reboot with new kernel
>>> go to click dir
>>> do configure again with same configure command line which you have been
>>> using
>>> $ make clean
>>> $ make install
>>> and run click with your config file.
>>>
>>> And if you can get kernel oops again
>>> $ gdb vmlinux (if the oops occurs from kernel itself)
>>> or
>>> $ gdb click.ko (if the oops occurs from click itself but your previous
>>> call stack said that the oops came from kernel)
>>>
>>> from gdb shell type:
>>> info line *<address of function> (ie. from your dump, type: info line
>>> *pfifo_fast_dequeue+0x48)
>>>
>>> Hopefully will give you a hint. Please let me know which line is making
>>> oops.
>>>
>>> Joonwoo
>>>
>>> > -Tom
>>> >
>>> > On Mon, Apr 6, 2009 at 5:14 PM, Joonwoo Park <joonwpark81 at gmail.com>
>>> > wrote:
>>> >>
>>> >> Hi folks,
>>> >>
>>> >> I've tried to reproduce kernel oops with your kernel config and click
>>> >> config.
>>> >> However I couldn't reproduce kernel oops unfortunately. I was
>>> >> guessing bonded device cause a problem.
>>> >> But for me I didn't happen. I'm using qemu to test click at this time
>>> >> because I'm not seeing any hardware specific involvement with your
>>> >> call stack trace. (but probably I'm wrong)
>>> >> Tom, does the problem (kernel oops) is always repeatable?
>>> >>
>>> >> BTW, I think we have another problem or possible regression.
>>> >> With the latest git version of click, although I'm using single
>>> >> threaded config with SMP linux. I can see ToDevice which stops
>>> >> pulling packets in few minutes.
>>> >> I believed that we (actually Eddie) had fixed this problem few months
>>> >> ago completely, but it looks like we hadn't :-(
>>> >> Eddie, do you have any idea?
>>> >>
>>> >> Joonwoo
>>> >>
>>> >> On Thu, Apr 2, 2009 at 8:45 PM, Tom Gibson <tom.gibson at ipvidnet.com>
>>> >> wrote:
>>> >> > I didn't get around to patching my driver for polling mode yet, but
>>> >> > I
>>> >> > did
>>> >> > try adding a FromDevice() -> Discard line to my config. Using the
>>> >> > bonding
>>> >> > ethernet device, it didn't help, the Kernel still locked up.
>>> >> >
>>> >> > After rebooting I tried running a seperate UDP traffic generator for
>>> >> > each
>>> >> > individual eth device (all using E1000 driver) also with the
>>> >> > FromDevice
>>> >> > line
>>> >> > included. I was happy to see this worked. Tomorrow when back in
>>> >> > the
>>> >> > office
>>> >> > I'll report if removing the FromDevice line causes the Kernel to
>>> >> > crash
>>> >> > or
>>> >> > not. Hopefully I'll also get migrated to the patched E1000e driver
>>> >> > to.
>>> >> >
>>> >> > -Tom
>>> >> >
>>> >> > On Thu, Apr 2, 2009 at 8:45 AM, Joonwoo Park <joonwpark81 at gmail.com>
>>> >> > wrote:
>>> >> >>
>>> >> >> On Thu, Apr 2, 2009 at 12:44 AM, Tom Gibson
>>> >> >> <tom.gibson at ipvidnet.com>
>>> >> >> wrote:
>>> >> >> > Ok. Thanks Joonwoo. I guess I read your name wrong before,
>>> >> >> > sorry.
>>> >> >> > :)
>>> >> >> >
>>> >> >>
>>> >> >> Never mind Tom :-)
>>> >> >>
>>> >> >> > Does it matter that I haven't applied the polling mode patch to
>>> >> >> > my
>>> >> >> > E1000
>>> >> >> > driver? Will PollDevice work correctly regardless? I'm just
>>> >> >> > using
>>> >> >> > the
>>> >> >> > driver that came with the Kernel, although NAPI is enabled.
>>> >> >> >
>>> >> >>
>>> >> >> Yes it does. To use PollDevice element you should patch your e1000
>>> >> >> driver.
>>> >> >> There are bunch of patches for the e1000 driver.
>>> >> >> You could you patch from click git for older version of e1000
>>> >> >> driver.
>>> >> >> Otherwise you can unofficial version of patches.
>>> >> >> I released both of e1000, e1000e driver on the list.
>>> >> >>
>>> >> >> > I hadn't thought about it until now. How does polling mode work
>>> >> >> > with
>>> >> >> > the
>>> >> >> > bonding ethernet driver? I wonder if that needs a special
>>> >> >> > polling
>>> >> >> > mode
>>> >> >> > patch to run in Click with optimal performance.
>>> >> >> >
>>> >> >>
>>> >> >> Unfortunately you cannot use linux bonding under click polling
>>> >> >> mode.
>>> >> >> You should use FromDevice. eg) FromDevice(bond0).
>>> >> >> Otherwise you may write your own bonding element for click to
>>> >> >> implement your own bonding system to use PollDevice
>>> >> >>
>>> >> >> Joonwoo
>>> >> >>
>>> >> >> > -Tom
>>> >> >> >
>>> >> >> > On Wed, Apr 1, 2009 at 10:36 PM, Joonwoo Park
>>> >> >> > <joonwpark81 at gmail.com>
>>> >> >> > wrote:
>>> >> >> >>
>>> >> >> >> The PollDevice might help you to *evade* your problem.
>>> >> >> >> But it looks like click has a bug which we have to fix.
>>> >> >> >>
>>> >> >> >> Generally speaking.
>>> >> >> >> PollDevice performs much better performance than FromDevice.
>>> >> >> >> And it uses other mechanism compare to FromDevice.
>>> >> >> >> In your case, as Roman pointed out, if you try to put
>>> >> >> >> PollDevice,
>>> >> >> >> even
>>> >> >> >> if it does nothing except drops packets will change your
>>> >> >> >> router's
>>> >> >> >> behavior.
>>> >> >> >>
>>> >> >> >> BTW, I'm Joonwoo :-)
>>> >> >> >>
>>> >> >> >> On Wed, Apr 1, 2009 at 10:24 PM, Tom Gibson
>>> >> >> >> <tom.gibson at ipvidnet.com>
>>> >> >> >> wrote:
>>> >> >> >> > Ok, I'll give that a try tomorrow when I'm at the office. I
>>> >> >> >> > really
>>> >> >> >> > appreciate the help from you and Johnwoo. I never would have
>>> >> >> >> > thought
>>> >> >> >> > of
>>> >> >> >> > having to include PollDevice(). I'll hopefully get around to
>>> >> >> >> > trying
>>> >> >> >> > Johnwoo's E1000e driver patch very soon.
>>> >> >> >> >
>>> >> >> >> > Do you know the reason why PollDevice is required? Does it
>>> >> >> >> > cause
>>> >> >> >> > some
>>> >> >> >> > FIFO
>>> >> >> >> > / queue to fill up which then causes problems? My setup may
>>> >> >> >> > have
>>> >> >> >> > been
>>> >> >> >> > getting back tons of destination port unreachable packets
>>> >> >> >> > which I
>>> >> >> >> > hadn't
>>> >> >> >> > thought about.
>>> >> >> >> >
>>> >> >> >> > -Tom
>>> >> >> >> >
>>> >> >> >> > On Wed, Apr 1, 2009 at 7:03 PM, Roman Chertov
>>> >> >> >> > <rchertov at cs.ucsb.edu>
>>> >> >> >> > wrote:
>>> >> >> >> >>
>>> >> >> >> >> Change your config to use PollDevice. That should enable
>>> >> >> >> >> polling
>>> >> >> >> >> on
>>> >> >> >> >> the
>>> >> >> >> >> interface. (You have to do it this way, even if you don't
>>> >> >> >> >> care
>>> >> >> >> >> about
>>> >> >> >> >> receiving packets)
>>> >> >> >> >>
>>> >> >> >> >> elementclass UDPGen {
>>> >> >> >> >> $device, $rate, $limit, $size,
>>> >> >> >> >> $seth, $sip, $sport, $deth, $dip, $dport |
>>> >> >> >> >>
>>> >> >> >> >> srcudp :: FastUDPSource($rate, $limit, $size, $seth, $sip,
>>> >> >> >> >> $sport,
>>> >> >> >> >> $deth, $dip,
>>> >> >> >> >> $dport);
>>> >> >> >> >> srcudp -> td :: ToDevice($device);
>>> >> >> >> >> PollDevice($device) -> Discard;
>>> >> >> >> >> }
>>> >> >> >> >>
>>> >> >> >> >> Roman
>>> >> >> >> >>
>>> >> >> >> >> Tom Gibson wrote:
>>> >> >> >> >>>
>>> >> >> >> >>> Here's my click config. It's a slightly modified version of
>>> >> >> >> >>> the
>>> >> >> >> >>> UDP
>>> >> >> >> >>> blaster script.
>>> >> >> >> >>>
>>> >> >> >> >>>
>>> >> >> >> >>> elementclass UDPGen {
>>> >> >> >> >>> $device, $rate, $limit, $size,
>>> >> >> >> >>> $seth, $sip, $sport, $deth, $dip, $dport |
>>> >> >> >> >>>
>>> >> >> >> >>> srcudp :: FastUDPSource($rate, $limit, $size, $seth, $sip,
>>> >> >> >> >>> $sport,
>>> >> >> >> >>> $deth, $dip,
>>> >> >> >> >>> $dport);
>>> >> >> >> >>> srcudp -> td :: ToDevice($device);
>>> >> >> >> >>> }
>>> >> >> >> >>>
>>> >> >> >> >>> /* using 1362 byte packets
>>> >> >> >> >>> 1gbps = 91777 pkts/sec
>>> >> >> >> >>> 2gbps = 183554 pkts/sec
>>> >> >> >> >>> 3gbps = 275330 pkts/sec
>>> >> >> >> >>> 4gbps = 367107 pkts/sec
>>> >> >> >> >>> 5gbps = 458884 pkts/sec
>>> >> >> >> >>> */
>>> >> >> >> >>> u :: UDPGen(bond0, 367107, 36710700, 1358,
>>> >> >> >> >>> 00:1f:c6:6c:d5:ca, 192.168.220.1, 1234,
>>> >> >> >> >>> 00:1f:c6:23:48:a6, 192.168.220.2, 1234);
>>> >> >> >> >>>
>>> >> >> >> >>> On Wed, Apr 1, 2009 at 5:01 PM, Joonwoo Park
>>> >> >> >> >>> <joonwpark81 at gmail.com
>>> >> >> >> >>> <mailto:joonwpark81 at gmail.com>> wrote:
>>> >> >> >> >>>
>>> >> >> >> >>> Sounds you are using FromDevice.
>>> >> >> >> >>> Is it possible to post your click config as well?
>>> >> >> >> >>>
>>> >> >> >> >>> Joonwoo
>>> >> >> >> >>>
>>> >> >> >> >>> On Wed, Apr 1, 2009 at 4:57 PM, Tom Gibson
>>> >> >> >> >>> <tom.gibson at ipvidnet.com
>>> >> >> >> >>> <mailto:tom.gibson at ipvidnet.com>> wrote:
>>> >> >> >> >>> > Sorry for the delayed response. I've been out of the
>>> >> >> >> >>> office
>>> >> >> >> >>> a
>>> >> >> >> >>> lot and when
>>> >> >> >> >>> > I first got this the PC running Click wasn't on the
>>> >> >> >> >>> Internet.
>>> >> >> >> >>> >
>>> >> >> >> >>> > I was / am running the E1000 driver that comes in the
>>> >> >> >> >>> 2.6.24-7
>>> >> >> >> >>> Kernel. The
>>> >> >> >> >>> > Kernel is the same as on kernel.org
>>> >> >> >> >>> <http://kernel.org>
>>> >> >> >> >>> except
>>> >> >> >> >>> for the click patch was applied.
>>> >> >> >> >>> >
>>> >> >> >> >>> > Below is my config I used to build the Kernel:
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Automatically generated make config: don't edit
>>> >> >> >> >>> > # Linux kernel version: 2.6.24.7
>>> >> >> >> >>> > # Tue Mar 10 17:46:31 2009
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_64BIT=y
>>> >> >> >> >>> > # CONFIG_X86_32 is not set
>>> >> >> >> >>> > CONFIG_X86_64=y
>>> >> >> >> >>> > CONFIG_X86=y
>>> >> >> >> >>> > CONFIG_GENERIC_TIME=y
>>> >> >> >> >>> > CONFIG_GENERIC_CMOS_UPDATE=y
>>> >> >> >> >>> > CONFIG_CLOCKSOURCE_WATCHDOG=y
>>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS=y
>>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
>>> >> >> >> >>> > CONFIG_LOCKDEP_SUPPORT=y
>>> >> >> >> >>> > CONFIG_STACKTRACE_SUPPORT=y
>>> >> >> >> >>> > CONFIG_SEMAPHORE_SLEEPERS=y
>>> >> >> >> >>> > CONFIG_MMU=y
>>> >> >> >> >>> > CONFIG_ZONE_DMA=y
>>> >> >> >> >>> > # CONFIG_QUICKLIST is not set
>>> >> >> >> >>> > CONFIG_GENERIC_ISA_DMA=y
>>> >> >> >> >>> > CONFIG_GENERIC_IOMAP=y
>>> >> >> >> >>> > CONFIG_GENERIC_BUG=y
>>> >> >> >> >>> > CONFIG_GENERIC_HWEIGHT=y
>>> >> >> >> >>> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
>>> >> >> >> >>> > CONFIG_DMI=y
>>> >> >> >> >>> > CONFIG_RWSEM_GENERIC_SPINLOCK=y
>>> >> >> >> >>> > # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
>>> >> >> >> >>> > # CONFIG_ARCH_HAS_ILOG2_U32 is not set
>>> >> >> >> >>> > # CONFIG_ARCH_HAS_ILOG2_U64 is not set
>>> >> >> >> >>> > CONFIG_GENERIC_CALIBRATE_DELAY=y
>>> >> >> >> >>> > CONFIG_GENERIC_TIME_VSYSCALL=y
>>> >> >> >> >>> > CONFIG_ARCH_SUPPORTS_OPROFILE=y
>>> >> >> >> >>> > CONFIG_ZONE_DMA32=y
>>> >> >> >> >>> > CONFIG_ARCH_POPULATES_NODE_MAP=y
>>> >> >> >> >>> > CONFIG_AUDIT_ARCH=y
>>> >> >> >> >>> > CONFIG_GENERIC_HARDIRQS=y
>>> >> >> >> >>> > CONFIG_GENERIC_IRQ_PROBE=y
>>> >> >> >> >>> > CONFIG_GENERIC_PENDING_IRQ=y
>>> >> >> >> >>> > CONFIG_X86_HT=y
>>> >> >> >> >>> > # CONFIG_KTIME_SCALAR is not set
>>> >> >> >> >>> >
>>> >> >> >> >>> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # General setup
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_EXPERIMENTAL=y
>>> >> >> >> >>> > CONFIG_LOCK_KERNEL=y
>>> >> >> >> >>> > CONFIG_INIT_ENV_ARG_LIMIT=32
>>> >> >> >> >>> > CONFIG_LOCALVERSION=""
>>> >> >> >> >>> > # CONFIG_LOCALVERSION_AUTO is not set
>>> >> >> >> >>> > CONFIG_SWAP=y
>>> >> >> >> >>> > CONFIG_SYSVIPC=y
>>> >> >> >> >>> > CONFIG_SYSVIPC_SYSCTL=y
>>> >> >> >> >>> > CONFIG_POSIX_MQUEUE=y
>>> >> >> >> >>> > CONFIG_BSD_PROCESS_ACCT=y
>>> >> >> >> >>> > CONFIG_BSD_PROCESS_ACCT_V3=y
>>> >> >> >> >>> > CONFIG_TASKSTATS=y
>>> >> >> >> >>> > CONFIG_TASK_DELAY_ACCT=y
>>> >> >> >> >>> > CONFIG_TASK_XACCT=y
>>> >> >> >> >>> > CONFIG_TASK_IO_ACCOUNTING=y
>>> >> >> >> >>> > CONFIG_USER_NS=y
>>> >> >> >> >>> > CONFIG_PID_NS=y
>>> >> >> >> >>> > CONFIG_AUDIT=y
>>> >> >> >> >>> > CONFIG_AUDITSYSCALL=y
>>> >> >> >> >>> > CONFIG_AUDIT_TREE=y
>>> >> >> >> >>> > # CONFIG_IKCONFIG is not set
>>> >> >> >> >>> > CONFIG_LOG_BUF_SHIFT=17
>>> >> >> >> >>> > CONFIG_CGROUPS=y
>>> >> >> >> >>> > # CONFIG_CGROUP_DEBUG is not set
>>> >> >> >> >>> > CONFIG_CGROUP_NS=y
>>> >> >> >> >>> > CONFIG_CPUSETS=y
>>> >> >> >> >>> > CONFIG_FAIR_GROUP_SCHED=y
>>> >> >> >> >>> > CONFIG_FAIR_USER_SCHED=y
>>> >> >> >> >>> > # CONFIG_FAIR_CGROUP_SCHED is not set
>>> >> >> >> >>> > CONFIG_CGROUP_CPUACCT=y
>>> >> >> >> >>> > CONFIG_SYSFS_DEPRECATED=y
>>> >> >> >> >>> > CONFIG_PROC_PID_CPUSET=y
>>> >> >> >> >>> > CONFIG_RELAY=y
>>> >> >> >> >>> > CONFIG_BLK_DEV_INITRD=y
>>> >> >> >> >>> > CONFIG_INITRAMFS_SOURCE=""
>>> >> >> >> >>> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y
>>> >> >> >> >>> > CONFIG_SYSCTL=y
>>> >> >> >> >>> > # CONFIG_EMBEDDED is not set
>>> >> >> >> >>> > CONFIG_UID16=y
>>> >> >> >> >>> > CONFIG_SYSCTL_SYSCALL=y
>>> >> >> >> >>> > CONFIG_KALLSYMS=y
>>> >> >> >> >>> > # CONFIG_KALLSYMS_ALL is not set
>>> >> >> >> >>> > # CONFIG_KALLSYMS_EXTRA_PASS is not set
>>> >> >> >> >>> > CONFIG_HOTPLUG=y
>>> >> >> >> >>> > CONFIG_PRINTK=y
>>> >> >> >> >>> > CONFIG_BUG=y
>>> >> >> >> >>> > CONFIG_ELF_CORE=y
>>> >> >> >> >>> > CONFIG_BASE_FULL=y
>>> >> >> >> >>> > CONFIG_FUTEX=y
>>> >> >> >> >>> > CONFIG_ANON_INODES=y
>>> >> >> >> >>> > CONFIG_EPOLL=y
>>> >> >> >> >>> > CONFIG_SIGNALFD=y
>>> >> >> >> >>> > CONFIG_EVENTFD=y
>>> >> >> >> >>> > CONFIG_SHMEM=y
>>> >> >> >> >>> > CONFIG_VM_EVENT_COUNTERS=y
>>> >> >> >> >>> > CONFIG_SLAB=y
>>> >> >> >> >>> > # CONFIG_SLUB is not set
>>> >> >> >> >>> > # CONFIG_SLOB is not set
>>> >> >> >> >>> > CONFIG_SLABINFO=y
>>> >> >> >> >>> > CONFIG_RT_MUTEXES=y
>>> >> >> >> >>> > # CONFIG_TINY_SHMEM is not set
>>> >> >> >> >>> > CONFIG_BASE_SMALL=0
>>> >> >> >> >>> > CONFIG_MODULES=y
>>> >> >> >> >>> > CONFIG_MODULE_UNLOAD=y
>>> >> >> >> >>> > CONFIG_MODULE_FORCE_UNLOAD=y
>>> >> >> >> >>> > CONFIG_MODVERSIONS=y
>>> >> >> >> >>> > # CONFIG_MODULE_SRCVERSION_ALL is not set
>>> >> >> >> >>> > CONFIG_KMOD=y
>>> >> >> >> >>> > CONFIG_STOP_MACHINE=y
>>> >> >> >> >>> > CONFIG_BLOCK=y
>>> >> >> >> >>> > CONFIG_BLK_DEV_IO_TRACE=y
>>> >> >> >> >>> > CONFIG_BLK_DEV_BSG=y
>>> >> >> >> >>> > CONFIG_BLOCK_COMPAT=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IO Schedulers
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IOSCHED_NOOP=y
>>> >> >> >> >>> > CONFIG_IOSCHED_AS=y
>>> >> >> >> >>> > CONFIG_IOSCHED_DEADLINE=y
>>> >> >> >> >>> > CONFIG_IOSCHED_CFQ=y
>>> >> >> >> >>> > # CONFIG_DEFAULT_AS is not set
>>> >> >> >> >>> > # CONFIG_DEFAULT_DEADLINE is not set
>>> >> >> >> >>> > CONFIG_DEFAULT_CFQ=y
>>> >> >> >> >>> > # CONFIG_DEFAULT_NOOP is not set
>>> >> >> >> >>> > CONFIG_DEFAULT_IOSCHED="cfq"
>>> >> >> >> >>> > CONFIG_PREEMPT_NOTIFIERS=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Processor type and features
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_TICK_ONESHOT=y
>>> >> >> >> >>> > CONFIG_NO_HZ=y
>>> >> >> >> >>> > CONFIG_HIGH_RES_TIMERS=y
>>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
>>> >> >> >> >>> > CONFIG_SMP=y
>>> >> >> >> >>> > CONFIG_X86_PC=y
>>> >> >> >> >>> > # CONFIG_X86_ELAN is not set
>>> >> >> >> >>> > # CONFIG_X86_VOYAGER is not set
>>> >> >> >> >>> > # CONFIG_X86_NUMAQ is not set
>>> >> >> >> >>> > # CONFIG_X86_SUMMIT is not set
>>> >> >> >> >>> > # CONFIG_X86_BIGSMP is not set
>>> >> >> >> >>> > # CONFIG_X86_VISWS is not set
>>> >> >> >> >>> > # CONFIG_X86_GENERICARCH is not set
>>> >> >> >> >>> > # CONFIG_X86_ES7000 is not set
>>> >> >> >> >>> > # CONFIG_X86_VSMP is not set
>>> >> >> >> >>> > # CONFIG_M386 is not set
>>> >> >> >> >>> > # CONFIG_M486 is not set
>>> >> >> >> >>> > # CONFIG_M586 is not set
>>> >> >> >> >>> > # CONFIG_M586TSC is not set
>>> >> >> >> >>> > # CONFIG_M586MMX is not set
>>> >> >> >> >>> > # CONFIG_M686 is not set
>>> >> >> >> >>> > # CONFIG_MPENTIUMII is not set
>>> >> >> >> >>> > # CONFIG_MPENTIUMIII is not set
>>> >> >> >> >>> > # CONFIG_MPENTIUMM is not set
>>> >> >> >> >>> > # CONFIG_MPENTIUM4 is not set
>>> >> >> >> >>> > # CONFIG_MK6 is not set
>>> >> >> >> >>> > # CONFIG_MK7 is not set
>>> >> >> >> >>> > # CONFIG_MK8 is not set
>>> >> >> >> >>> > # CONFIG_MCRUSOE is not set
>>> >> >> >> >>> > # CONFIG_MEFFICEON is not set
>>> >> >> >> >>> > # CONFIG_MWINCHIPC6 is not set
>>> >> >> >> >>> > # CONFIG_MWINCHIP2 is not set
>>> >> >> >> >>> > # CONFIG_MWINCHIP3D is not set
>>> >> >> >> >>> > # CONFIG_MGEODEGX1 is not set
>>> >> >> >> >>> > # CONFIG_MGEODE_LX is not set
>>> >> >> >> >>> > # CONFIG_MCYRIXIII is not set
>>> >> >> >> >>> > # CONFIG_MVIAC3_2 is not set
>>> >> >> >> >>> > # CONFIG_MVIAC7 is not set
>>> >> >> >> >>> > # CONFIG_MPSC is not set
>>> >> >> >> >>> > CONFIG_MCORE2=y
>>> >> >> >> >>> > # CONFIG_GENERIC_CPU is not set
>>> >> >> >> >>> > CONFIG_X86_L1_CACHE_BYTES=64
>>> >> >> >> >>> > CONFIG_X86_INTERNODE_CACHE_BYTES=64
>>> >> >> >> >>> > CONFIG_X86_CMPXCHG=y
>>> >> >> >> >>> > CONFIG_X86_L1_CACHE_SHIFT=6
>>> >> >> >> >>> > CONFIG_X86_GOOD_APIC=y
>>> >> >> >> >>> > CONFIG_X86_INTEL_USERCOPY=y
>>> >> >> >> >>> > CONFIG_X86_USE_PPRO_CHECKSUM=y
>>> >> >> >> >>> > CONFIG_X86_TSC=y
>>> >> >> >> >>> > CONFIG_X86_MINIMUM_CPU_FAMILY=64
>>> >> >> >> >>> > CONFIG_HPET_TIMER=y
>>> >> >> >> >>> > CONFIG_GART_IOMMU=y
>>> >> >> >> >>> > CONFIG_CALGARY_IOMMU=y
>>> >> >> >> >>> > CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
>>> >> >> >> >>> > CONFIG_SWIOTLB=y
>>> >> >> >> >>> > CONFIG_NR_CPUS=32
>>> >> >> >> >>> > CONFIG_SCHED_SMT=y
>>> >> >> >> >>> > CONFIG_SCHED_MC=y
>>> >> >> >> >>> > CONFIG_PREEMPT_NONE=y
>>> >> >> >> >>> > # CONFIG_PREEMPT_VOLUNTARY is not set
>>> >> >> >> >>> > # CONFIG_PREEMPT is not set
>>> >> >> >> >>> > # CONFIG_PREEMPT_BKL is not set
>>> >> >> >> >>> > CONFIG_X86_LOCAL_APIC=y
>>> >> >> >> >>> > CONFIG_X86_IO_APIC=y
>>> >> >> >> >>> > CONFIG_X86_MCE=y
>>> >> >> >> >>> > CONFIG_X86_MCE_INTEL=y
>>> >> >> >> >>> > CONFIG_X86_MCE_AMD=y
>>> >> >> >> >>> > CONFIG_MICROCODE=m
>>> >> >> >> >>> > CONFIG_MICROCODE_OLD_INTERFACE=y
>>> >> >> >> >>> > CONFIG_X86_MSR=m
>>> >> >> >> >>> > CONFIG_X86_CPUID=m
>>> >> >> >> >>> > CONFIG_NUMA=y
>>> >> >> >> >>> > CONFIG_K8_NUMA=y
>>> >> >> >> >>> > CONFIG_X86_64_ACPI_NUMA=y
>>> >> >> >> >>> > # CONFIG_NUMA_EMU is not set
>>> >> >> >> >>> > CONFIG_NODES_SHIFT=6
>>> >> >> >> >>> > CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
>>> >> >> >> >>> > CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
>>> >> >> >> >>> > CONFIG_ARCH_SPARSEMEM_ENABLE=y
>>> >> >> >> >>> > CONFIG_SELECT_MEMORY_MODEL=y
>>> >> >> >> >>> > # CONFIG_FLATMEM_MANUAL is not set
>>> >> >> >> >>> > # CONFIG_DISCONTIGMEM_MANUAL is not set
>>> >> >> >> >>> > CONFIG_SPARSEMEM_MANUAL=y
>>> >> >> >> >>> > CONFIG_SPARSEMEM=y
>>> >> >> >> >>> > CONFIG_NEED_MULTIPLE_NODES=y
>>> >> >> >> >>> > CONFIG_HAVE_MEMORY_PRESENT=y
>>> >> >> >> >>> > # CONFIG_SPARSEMEM_STATIC is not set
>>> >> >> >> >>> > CONFIG_SPARSEMEM_EXTREME=y
>>> >> >> >> >>> > CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
>>> >> >> >> >>> > CONFIG_SPARSEMEM_VMEMMAP=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Memory hotplug is currently incompatible with
>>> >> >> >> >>> Software
>>> >> >> >> >>> Suspend
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_SPLIT_PTLOCK_CPUS=4
>>> >> >> >> >>> > CONFIG_MIGRATION=y
>>> >> >> >> >>> > CONFIG_RESOURCES_64BIT=y
>>> >> >> >> >>> > CONFIG_ZONE_DMA_FLAG=1
>>> >> >> >> >>> > CONFIG_BOUNCE=y
>>> >> >> >> >>> > CONFIG_VIRT_TO_BUS=y
>>> >> >> >> >>> > CONFIG_MTRR=y
>>> >> >> >> >>> > CONFIG_SECCOMP=y
>>> >> >> >> >>> > # CONFIG_CC_STACKPROTECTOR is not set
>>> >> >> >> >>> > # CONFIG_HZ_100 is not set
>>> >> >> >> >>> > CONFIG_HZ_250=y
>>> >> >> >> >>> > # CONFIG_HZ_300 is not set
>>> >> >> >> >>> > # CONFIG_HZ_1000 is not set
>>> >> >> >> >>> > CONFIG_HZ=250
>>> >> >> >> >>> > CONFIG_KEXEC=y
>>> >> >> >> >>> > # CONFIG_CRASH_DUMP is not set
>>> >> >> >> >>> > CONFIG_PHYSICAL_START=0x200000
>>> >> >> >> >>> > # CONFIG_RELOCATABLE is not set
>>> >> >> >> >>> > CONFIG_PHYSICAL_ALIGN=0x200000
>>> >> >> >> >>> > CONFIG_HOTPLUG_CPU=y
>>> >> >> >> >>> > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
>>> >> >> >> >>> > CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Power management options
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_ARCH_HIBERNATION_HEADER=y
>>> >> >> >> >>> > CONFIG_PM=y
>>> >> >> >> >>> > # CONFIG_PM_LEGACY is not set
>>> >> >> >> >>> > # CONFIG_PM_DEBUG is not set
>>> >> >> >> >>> > CONFIG_PM_SLEEP_SMP=y
>>> >> >> >> >>> > CONFIG_PM_SLEEP=y
>>> >> >> >> >>> > CONFIG_SUSPEND_SMP_POSSIBLE=y
>>> >> >> >> >>> > CONFIG_SUSPEND=y
>>> >> >> >> >>> > CONFIG_HIBERNATION_SMP_POSSIBLE=y
>>> >> >> >> >>> > CONFIG_HIBERNATION=y
>>> >> >> >> >>> > CONFIG_PM_STD_PARTITION=""
>>> >> >> >> >>> > CONFIG_ACPI=y
>>> >> >> >> >>> > CONFIG_ACPI_SLEEP=y
>>> >> >> >> >>> > CONFIG_ACPI_PROCFS=y
>>> >> >> >> >>> > CONFIG_ACPI_PROCFS_POWER=y
>>> >> >> >> >>> > CONFIG_ACPI_SYSFS_POWER=y
>>> >> >> >> >>> > CONFIG_ACPI_PROC_EVENT=y
>>> >> >> >> >>> > CONFIG_ACPI_AC=m
>>> >> >> >> >>> > CONFIG_ACPI_BATTERY=m
>>> >> >> >> >>> > CONFIG_ACPI_BUTTON=m
>>> >> >> >> >>> > CONFIG_ACPI_VIDEO=m
>>> >> >> >> >>> > CONFIG_ACPI_FAN=m
>>> >> >> >> >>> > CONFIG_ACPI_DOCK=m
>>> >> >> >> >>> > CONFIG_ACPI_BAY=m
>>> >> >> >> >>> > CONFIG_ACPI_PROCESSOR=m
>>> >> >> >> >>> > CONFIG_ACPI_HOTPLUG_CPU=y
>>> >> >> >> >>> > CONFIG_ACPI_THERMAL=m
>>> >> >> >> >>> > CONFIG_ACPI_NUMA=y
>>> >> >> >> >>> > CONFIG_ACPI_ASUS=m
>>> >> >> >> >>> > CONFIG_ACPI_TOSHIBA=m
>>> >> >> >> >>> > CONFIG_ACPI_BLACKLIST_YEAR=0
>>> >> >> >> >>> > # CONFIG_ACPI_DEBUG is not set
>>> >> >> >> >>> > CONFIG_ACPI_EC=y
>>> >> >> >> >>> > CONFIG_ACPI_POWER=y
>>> >> >> >> >>> > CONFIG_ACPI_SYSTEM=y
>>> >> >> >> >>> > CONFIG_X86_PM_TIMER=y
>>> >> >> >> >>> > CONFIG_ACPI_CONTAINER=m
>>> >> >> >> >>> > CONFIG_ACPI_SBS=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # CPU Frequency scaling
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_CPU_FREQ=y
>>> >> >> >> >>> > CONFIG_CPU_FREQ_TABLE=m
>>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEBUG is not set
>>> >> >> >> >>> > CONFIG_CPU_FREQ_STAT=m
>>> >> >> >> >>> > # CONFIG_CPU_FREQ_STAT_DETAILS is not set
>>> >> >> >> >>> > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
>>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
>>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
>>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
>>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
>>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_POWERSAVE=m
>>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_USERSPACE=m
>>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_ONDEMAND=m
>>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # CPUFreq processor drivers
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_X86_ACPI_CPUFREQ=m
>>> >> >> >> >>> > CONFIG_X86_POWERNOW_K8=m
>>> >> >> >> >>> > CONFIG_X86_POWERNOW_K8_ACPI=y
>>> >> >> >> >>> > CONFIG_X86_SPEEDSTEP_CENTRINO=m
>>> >> >> >> >>> > # CONFIG_X86_P4_CLOCKMOD is not set
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # shared options
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
>>> >> >> >> >>> > # CONFIG_X86_SPEEDSTEP_LIB is not set
>>> >> >> >> >>> > CONFIG_CPU_IDLE=y
>>> >> >> >> >>> > CONFIG_CPU_IDLE_GOV_LADDER=y
>>> >> >> >> >>> > CONFIG_CPU_IDLE_GOV_MENU=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Bus options (PCI etc.)
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_PCI=y
>>> >> >> >> >>> > CONFIG_PCI_DIRECT=y
>>> >> >> >> >>> > CONFIG_PCI_MMCONFIG=y
>>> >> >> >> >>> > CONFIG_PCI_DOMAINS=y
>>> >> >> >> >>> > # CONFIG_DMAR is not set
>>> >> >> >> >>> > CONFIG_PCIEPORTBUS=y
>>> >> >> >> >>> > CONFIG_PCIEAER=y
>>> >> >> >> >>> > CONFIG_ARCH_SUPPORTS_MSI=y
>>> >> >> >> >>> > CONFIG_PCI_MSI=y
>>> >> >> >> >>> > CONFIG_PCI_LEGACY=y
>>> >> >> >> >>> > # CONFIG_PCI_DEBUG is not set
>>> >> >> >> >>> > CONFIG_HT_IRQ=y
>>> >> >> >> >>> > CONFIG_ISA_DMA_API=y
>>> >> >> >> >>> > CONFIG_K8_NB=y
>>> >> >> >> >>> > # CONFIG_PCCARD is not set
>>> >> >> >> >>> > # CONFIG_HOTPLUG_PCI is not set
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Executable file formats / Emulations
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_BINFMT_ELF=y
>>> >> >> >> >>> > CONFIG_BINFMT_MISC=m
>>> >> >> >> >>> > CONFIG_IA32_EMULATION=y
>>> >> >> >> >>> > CONFIG_IA32_AOUT=y
>>> >> >> >> >>> > CONFIG_COMPAT=y
>>> >> >> >> >>> > CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
>>> >> >> >> >>> > CONFIG_SYSVIPC_COMPAT=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Networking
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_NET=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Networking options
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_PACKET=y
>>> >> >> >> >>> > CONFIG_PACKET_MMAP=y
>>> >> >> >> >>> > CONFIG_UNIX=y
>>> >> >> >> >>> > CONFIG_XFRM=y
>>> >> >> >> >>> > CONFIG_XFRM_USER=m
>>> >> >> >> >>> > # CONFIG_XFRM_SUB_POLICY is not set
>>> >> >> >> >>> > # CONFIG_XFRM_MIGRATE is not set
>>> >> >> >> >>> > CONFIG_NET_KEY=m
>>> >> >> >> >>> > # CONFIG_NET_KEY_MIGRATE is not set
>>> >> >> >> >>> > CONFIG_INET=y
>>> >> >> >> >>> > CONFIG_IP_MULTICAST=y
>>> >> >> >> >>> > CONFIG_IP_ADVANCED_ROUTER=y
>>> >> >> >> >>> > CONFIG_ASK_IP_FIB_HASH=y
>>> >> >> >> >>> > # CONFIG_IP_FIB_TRIE is not set
>>> >> >> >> >>> > CONFIG_IP_FIB_HASH=y
>>> >> >> >> >>> > CONFIG_IP_MULTIPLE_TABLES=y
>>> >> >> >> >>> > CONFIG_IP_ROUTE_MULTIPATH=y
>>> >> >> >> >>> > CONFIG_IP_ROUTE_VERBOSE=y
>>> >> >> >> >>> > # CONFIG_IP_PNP is not set
>>> >> >> >> >>> > CONFIG_NET_IPIP=m
>>> >> >> >> >>> > CONFIG_NET_IPGRE=m
>>> >> >> >> >>> > CONFIG_NET_IPGRE_BROADCAST=y
>>> >> >> >> >>> > CONFIG_IP_MROUTE=y
>>> >> >> >> >>> > CONFIG_IP_PIMSM_V1=y
>>> >> >> >> >>> > CONFIG_IP_PIMSM_V2=y
>>> >> >> >> >>> > # CONFIG_ARPD is not set
>>> >> >> >> >>> > CONFIG_SYN_COOKIES=y
>>> >> >> >> >>> > CONFIG_INET_AH=m
>>> >> >> >> >>> > CONFIG_INET_ESP=m
>>> >> >> >> >>> > CONFIG_INET_IPCOMP=m
>>> >> >> >> >>> > CONFIG_INET_XFRM_TUNNEL=m
>>> >> >> >> >>> > CONFIG_INET_TUNNEL=m
>>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_TRANSPORT=m
>>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_TUNNEL=m
>>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_BEET=m
>>> >> >> >> >>> > CONFIG_INET_LRO=m
>>> >> >> >> >>> > CONFIG_INET_DIAG=m
>>> >> >> >> >>> > CONFIG_INET_TCP_DIAG=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_ADVANCED=y
>>> >> >> >> >>> > CONFIG_TCP_CONG_BIC=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_CUBIC=y
>>> >> >> >> >>> > CONFIG_TCP_CONG_WESTWOOD=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_HTCP=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_HSTCP=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_HYBLA=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_VEGAS=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_SCALABLE=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_LP=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_VENO=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_YEAH=m
>>> >> >> >> >>> > CONFIG_TCP_CONG_ILLINOIS=m
>>> >> >> >> >>> > # CONFIG_DEFAULT_BIC is not set
>>> >> >> >> >>> > CONFIG_DEFAULT_CUBIC=y
>>> >> >> >> >>> > # CONFIG_DEFAULT_HTCP is not set
>>> >> >> >> >>> > # CONFIG_DEFAULT_VEGAS is not set
>>> >> >> >> >>> > # CONFIG_DEFAULT_WESTWOOD is not set
>>> >> >> >> >>> > # CONFIG_DEFAULT_RENO is not set
>>> >> >> >> >>> > CONFIG_DEFAULT_TCP_CONG="cubic"
>>> >> >> >> >>> > CONFIG_TCP_MD5SIG=y
>>> >> >> >> >>> > CONFIG_IP_VS=m
>>> >> >> >> >>> > # CONFIG_IP_VS_DEBUG is not set
>>> >> >> >> >>> > CONFIG_IP_VS_TAB_BITS=12
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IPVS transport protocol load balancing support
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IP_VS_PROTO_TCP=y
>>> >> >> >> >>> > CONFIG_IP_VS_PROTO_UDP=y
>>> >> >> >> >>> > CONFIG_IP_VS_PROTO_ESP=y
>>> >> >> >> >>> > CONFIG_IP_VS_PROTO_AH=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IPVS scheduler
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IP_VS_RR=m
>>> >> >> >> >>> > CONFIG_IP_VS_WRR=m
>>> >> >> >> >>> > CONFIG_IP_VS_LC=m
>>> >> >> >> >>> > CONFIG_IP_VS_WLC=m
>>> >> >> >> >>> > CONFIG_IP_VS_LBLC=m
>>> >> >> >> >>> > CONFIG_IP_VS_LBLCR=m
>>> >> >> >> >>> > CONFIG_IP_VS_DH=m
>>> >> >> >> >>> > CONFIG_IP_VS_SH=m
>>> >> >> >> >>> > CONFIG_IP_VS_SED=m
>>> >> >> >> >>> > CONFIG_IP_VS_NQ=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IPVS application helper
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IP_VS_FTP=m
>>> >> >> >> >>> > CONFIG_IPV6=m
>>> >> >> >> >>> > CONFIG_IPV6_PRIVACY=y
>>> >> >> >> >>> > CONFIG_IPV6_ROUTER_PREF=y
>>> >> >> >> >>> > CONFIG_IPV6_ROUTE_INFO=y
>>> >> >> >> >>> > CONFIG_IPV6_OPTIMISTIC_DAD=y
>>> >> >> >> >>> > CONFIG_INET6_AH=m
>>> >> >> >> >>> > CONFIG_INET6_ESP=m
>>> >> >> >> >>> > CONFIG_INET6_IPCOMP=m
>>> >> >> >> >>> > CONFIG_IPV6_MIP6=m
>>> >> >> >> >>> > CONFIG_INET6_XFRM_TUNNEL=m
>>> >> >> >> >>> > CONFIG_INET6_TUNNEL=m
>>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_TRANSPORT=m
>>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_TUNNEL=m
>>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_BEET=m
>>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
>>> >> >> >> >>> > CONFIG_IPV6_SIT=m
>>> >> >> >> >>> > CONFIG_IPV6_TUNNEL=m
>>> >> >> >> >>> > CONFIG_IPV6_MULTIPLE_TABLES=y
>>> >> >> >> >>> > CONFIG_IPV6_SUBTREES=y
>>> >> >> >> >>> > # CONFIG_NETLABEL is not set
>>> >> >> >> >>> > CONFIG_NETWORK_SECMARK=y
>>> >> >> >> >>> > CONFIG_NETFILTER=y
>>> >> >> >> >>> > # CONFIG_NETFILTER_DEBUG is not set
>>> >> >> >> >>> > CONFIG_BRIDGE_NETFILTER=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Core Netfilter Configuration
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK=m
>>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK_QUEUE=m
>>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK_LOG=m
>>> >> >> >> >>> > # CONFIG_NF_CONNTRACK_ENABLED is not set
>>> >> >> >> >>> > # CONFIG_NF_CONNTRACK is not set
>>> >> >> >> >>> > CONFIG_NETFILTER_XTABLES=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_DSCP=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_MARK=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_NFLOG=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_TRACE=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_SECMARK=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_COMMENT=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_DCCP=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_DSCP=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_ESP=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_LENGTH=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_LIMIT=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MAC=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MARK=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_POLICY=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_QUOTA=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_REALM=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_SCTP=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_STRING=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_TIME=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_U32=m
>>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IP: Netfilter Configuration
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IP_NF_QUEUE=m
>>> >> >> >> >>> > CONFIG_IP_NF_IPTABLES=m
>>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_IPRANGE is not set
>>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_TOS is not set
>>> >> >> >> >>> > CONFIG_IP_NF_MATCH_RECENT=m
>>> >> >> >> >>> > CONFIG_IP_NF_MATCH_ECN=m
>>> >> >> >> >>> > CONFIG_IP_NF_MATCH_AH=m
>>> >> >> >> >>> > CONFIG_IP_NF_MATCH_TTL=m
>>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_OWNER is not set
>>> >> >> >> >>> > CONFIG_IP_NF_MATCH_ADDRTYPE=m
>>> >> >> >> >>> > CONFIG_IP_NF_FILTER=m
>>> >> >> >> >>> > CONFIG_IP_NF_TARGET_REJECT=m
>>> >> >> >> >>> > CONFIG_IP_NF_TARGET_LOG=m
>>> >> >> >> >>> > CONFIG_IP_NF_TARGET_ULOG=m
>>> >> >> >> >>> > CONFIG_IP_NF_MANGLE=m
>>> >> >> >> >>> > # CONFIG_IP_NF_TARGET_TOS is not set
>>> >> >> >> >>> > CONFIG_IP_NF_TARGET_ECN=m
>>> >> >> >> >>> > CONFIG_IP_NF_TARGET_TTL=m
>>> >> >> >> >>> > CONFIG_IP_NF_RAW=m
>>> >> >> >> >>> > CONFIG_IP_NF_ARPTABLES=m
>>> >> >> >> >>> > CONFIG_IP_NF_ARPFILTER=m
>>> >> >> >> >>> > CONFIG_IP_NF_ARP_MANGLE=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IPv6: Netfilter Configuration (EXPERIMENTAL)
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IP6_NF_QUEUE=m
>>> >> >> >> >>> > CONFIG_IP6_NF_IPTABLES=m
>>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_RT=m
>>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_OPTS=m
>>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_FRAG=m
>>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_HL=m
>>> >> >> >> >>> > # CONFIG_IP6_NF_MATCH_OWNER is not set
>>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_IPV6HEADER=m
>>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_AH=m
>>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_MH=m
>>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_EUI64=m
>>> >> >> >> >>> > CONFIG_IP6_NF_FILTER=m
>>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_LOG=m
>>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_REJECT=m
>>> >> >> >> >>> > CONFIG_IP6_NF_MANGLE=m
>>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_HL=m
>>> >> >> >> >>> > CONFIG_IP6_NF_RAW=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Bridge: Netfilter Configuration
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_BRIDGE_NF_EBTABLES=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_BROUTE=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_T_FILTER=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_T_NAT=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_802_3=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_AMONG=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ARP=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_IP=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_LIMIT=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_MARK=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_PKTTYPE=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_STP=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_VLAN=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ARPREPLY=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_DNAT=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_MARK_T=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_REDIRECT=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_SNAT=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_LOG=m
>>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ULOG=m
>>> >> >> >> >>> > CONFIG_IP_DCCP=m
>>> >> >> >> >>> > CONFIG_INET_DCCP_DIAG=m
>>> >> >> >> >>> > CONFIG_IP_DCCP_ACKVEC=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # DCCP CCIDs Configuration (EXPERIMENTAL)
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IP_DCCP_CCID2=m
>>> >> >> >> >>> > # CONFIG_IP_DCCP_CCID2_DEBUG is not set
>>> >> >> >> >>> > CONFIG_IP_DCCP_CCID3=m
>>> >> >> >> >>> > CONFIG_IP_DCCP_TFRC_LIB=m
>>> >> >> >> >>> > # CONFIG_IP_DCCP_CCID3_DEBUG is not set
>>> >> >> >> >>> > CONFIG_IP_DCCP_CCID3_RTO=100
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # DCCP Kernel Hacking
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # CONFIG_IP_DCCP_DEBUG is not set
>>> >> >> >> >>> > CONFIG_IP_SCTP=m
>>> >> >> >> >>> > # CONFIG_SCTP_DBG_MSG is not set
>>> >> >> >> >>> > # CONFIG_SCTP_DBG_OBJCNT is not set
>>> >> >> >> >>> > # CONFIG_SCTP_HMAC_NONE is not set
>>> >> >> >> >>> > # CONFIG_SCTP_HMAC_SHA1 is not set
>>> >> >> >> >>> > CONFIG_SCTP_HMAC_MD5=y
>>> >> >> >> >>> > CONFIG_TIPC=m
>>> >> >> >> >>> > CONFIG_TIPC_ADVANCED=y
>>> >> >> >> >>> > CONFIG_TIPC_ZONES=3
>>> >> >> >> >>> > CONFIG_TIPC_CLUSTERS=1
>>> >> >> >> >>> > CONFIG_TIPC_NODES=255
>>> >> >> >> >>> > CONFIG_TIPC_SLAVE_NODES=0
>>> >> >> >> >>> > CONFIG_TIPC_PORTS=8191
>>> >> >> >> >>> > CONFIG_TIPC_LOG=0
>>> >> >> >> >>> > # CONFIG_TIPC_DEBUG is not set
>>> >> >> >> >>> > # CONFIG_ATM is not set
>>> >> >> >> >>> > CONFIG_BRIDGE=m
>>> >> >> >> >>> > CONFIG_VLAN_8021Q=m
>>> >> >> >> >>> > # CONFIG_DECNET is not set
>>> >> >> >> >>> > CONFIG_LLC=m
>>> >> >> >> >>> > CONFIG_LLC2=m
>>> >> >> >> >>> > # CONFIG_IPX is not set
>>> >> >> >> >>> > # CONFIG_ATALK is not set
>>> >> >> >> >>> > CONFIG_X25=m
>>> >> >> >> >>> > CONFIG_LAPB=m
>>> >> >> >> >>> > CONFIG_ECONET=m
>>> >> >> >> >>> > CONFIG_ECONET_AUNUDP=y
>>> >> >> >> >>> > CONFIG_ECONET_NATIVE=y
>>> >> >> >> >>> > CONFIG_WAN_ROUTER=m
>>> >> >> >> >>> > CONFIG_NET_SCHED=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Queueing/Scheduling
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_NET_SCH_CBQ=m
>>> >> >> >> >>> > CONFIG_NET_SCH_HTB=m
>>> >> >> >> >>> > CONFIG_NET_SCH_HFSC=m
>>> >> >> >> >>> > CONFIG_NET_SCH_PRIO=m
>>> >> >> >> >>> > # CONFIG_NET_SCH_RR is not set
>>> >> >> >> >>> > CONFIG_NET_SCH_RED=m
>>> >> >> >> >>> > CONFIG_NET_SCH_SFQ=m
>>> >> >> >> >>> > CONFIG_NET_SCH_TEQL=m
>>> >> >> >> >>> > CONFIG_NET_SCH_TBF=m
>>> >> >> >> >>> > CONFIG_NET_SCH_GRED=m
>>> >> >> >> >>> > CONFIG_NET_SCH_DSMARK=m
>>> >> >> >> >>> > CONFIG_NET_SCH_NETEM=m
>>> >> >> >> >>> > CONFIG_NET_SCH_INGRESS=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Classification
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_NET_CLS=y
>>> >> >> >> >>> > CONFIG_NET_CLS_BASIC=m
>>> >> >> >> >>> > CONFIG_NET_CLS_TCINDEX=m
>>> >> >> >> >>> > CONFIG_NET_CLS_ROUTE4=m
>>> >> >> >> >>> > CONFIG_NET_CLS_ROUTE=y
>>> >> >> >> >>> > CONFIG_NET_CLS_FW=m
>>> >> >> >> >>> > CONFIG_NET_CLS_U32=m
>>> >> >> >> >>> > CONFIG_CLS_U32_PERF=y
>>> >> >> >> >>> > CONFIG_CLS_U32_MARK=y
>>> >> >> >> >>> > CONFIG_NET_CLS_RSVP=m
>>> >> >> >> >>> > CONFIG_NET_CLS_RSVP6=m
>>> >> >> >> >>> > CONFIG_NET_EMATCH=y
>>> >> >> >> >>> > CONFIG_NET_EMATCH_STACK=32
>>> >> >> >> >>> > CONFIG_NET_EMATCH_CMP=m
>>> >> >> >> >>> > CONFIG_NET_EMATCH_NBYTE=m
>>> >> >> >> >>> > CONFIG_NET_EMATCH_U32=m
>>> >> >> >> >>> > CONFIG_NET_EMATCH_META=m
>>> >> >> >> >>> > CONFIG_NET_EMATCH_TEXT=m
>>> >> >> >> >>> > CONFIG_NET_CLS_ACT=y
>>> >> >> >> >>> > CONFIG_NET_ACT_POLICE=m
>>> >> >> >> >>> > CONFIG_NET_ACT_GACT=m
>>> >> >> >> >>> > CONFIG_GACT_PROB=y
>>> >> >> >> >>> > CONFIG_NET_ACT_MIRRED=m
>>> >> >> >> >>> > CONFIG_NET_ACT_IPT=m
>>> >> >> >> >>> > CONFIG_NET_ACT_NAT=m
>>> >> >> >> >>> > CONFIG_NET_ACT_PEDIT=m
>>> >> >> >> >>> > CONFIG_NET_ACT_SIMP=m
>>> >> >> >> >>> > # CONFIG_NET_CLS_POLICE is not set
>>> >> >> >> >>> > CONFIG_NET_CLS_IND=y
>>> >> >> >> >>> > CONFIG_NET_SCH_FIFO=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Network testing
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_NET_PKTGEN=m
>>> >> >> >> >>> > CONFIG_HAMRADIO=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Packet Radio protocols
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_AX25=m
>>> >> >> >> >>> > # CONFIG_AX25_DAMA_SLAVE is not set
>>> >> >> >> >>> > CONFIG_NETROM=m
>>> >> >> >> >>> > CONFIG_ROSE=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # AX.25 network device drivers
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_MKISS=m
>>> >> >> >> >>> > CONFIG_6PACK=m
>>> >> >> >> >>> > CONFIG_BPQETHER=m
>>> >> >> >> >>> > CONFIG_BAYCOM_SER_FDX=m
>>> >> >> >> >>> > CONFIG_BAYCOM_SER_HDX=m
>>> >> >> >> >>> > # CONFIG_YAM is not set
>>> >> >> >> >>> > CONFIG_IRDA=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IrDA protocols
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IRLAN=m
>>> >> >> >> >>> > CONFIG_IRNET=m
>>> >> >> >> >>> > CONFIG_IRCOMM=m
>>> >> >> >> >>> > # CONFIG_IRDA_ULTRA is not set
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IrDA options
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IRDA_CACHE_LAST_LSAP=y
>>> >> >> >> >>> > CONFIG_IRDA_FAST_RR=y
>>> >> >> >> >>> > # CONFIG_IRDA_DEBUG is not set
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Infrared-port device drivers
>>> >> >> >> >>> > #
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # SIR device drivers
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IRTTY_SIR=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Dongle support
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_DONGLE=y
>>> >> >> >> >>> > CONFIG_ESI_DONGLE=m
>>> >> >> >> >>> > CONFIG_ACTISYS_DONGLE=m
>>> >> >> >> >>> > CONFIG_TEKRAM_DONGLE=m
>>> >> >> >> >>> > CONFIG_TOIM3232_DONGLE=m
>>> >> >> >> >>> > CONFIG_LITELINK_DONGLE=m
>>> >> >> >> >>> > CONFIG_MA600_DONGLE=m
>>> >> >> >> >>> > CONFIG_GIRBIL_DONGLE=m
>>> >> >> >> >>> > CONFIG_MCP2120_DONGLE=m
>>> >> >> >> >>> > CONFIG_OLD_BELKIN_DONGLE=m
>>> >> >> >> >>> > CONFIG_ACT200L_DONGLE=m
>>> >> >> >> >>> > CONFIG_KINGSUN_DONGLE=m
>>> >> >> >> >>> > CONFIG_KSDAZZLE_DONGLE=m
>>> >> >> >> >>> > CONFIG_KS959_DONGLE=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Old SIR device drivers
>>> >> >> >> >>> > #
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Old Serial dongle support
>>> >> >> >> >>> > #
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # FIR device drivers
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_USB_IRDA=m
>>> >> >> >> >>> > CONFIG_SIGMATEL_FIR=m
>>> >> >> >> >>> > CONFIG_NSC_FIR=m
>>> >> >> >> >>> > CONFIG_WINBOND_FIR=m
>>> >> >> >> >>> > CONFIG_SMC_IRCC_FIR=m
>>> >> >> >> >>> > CONFIG_ALI_FIR=m
>>> >> >> >> >>> > CONFIG_VLSI_FIR=m
>>> >> >> >> >>> > CONFIG_VIA_FIR=m
>>> >> >> >> >>> > CONFIG_MCS_FIR=m
>>> >> >> >> >>> > CONFIG_BT=m
>>> >> >> >> >>> > CONFIG_BT_L2CAP=m
>>> >> >> >> >>> > CONFIG_BT_SCO=m
>>> >> >> >> >>> > CONFIG_BT_RFCOMM=m
>>> >> >> >> >>> > CONFIG_BT_RFCOMM_TTY=y
>>> >> >> >> >>> > CONFIG_BT_BNEP=m
>>> >> >> >> >>> > CONFIG_BT_BNEP_MC_FILTER=y
>>> >> >> >> >>> > CONFIG_BT_BNEP_PROTO_FILTER=y
>>> >> >> >> >>> > CONFIG_BT_HIDP=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Bluetooth device drivers
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_BT_HCIUSB=m
>>> >> >> >> >>> > CONFIG_BT_HCIUSB_SCO=y
>>> >> >> >> >>> > CONFIG_BT_HCIUART=m
>>> >> >> >> >>> > CONFIG_BT_HCIUART_H4=y
>>> >> >> >> >>> > CONFIG_BT_HCIUART_BCSP=y
>>> >> >> >> >>> > CONFIG_BT_HCIUART_LL=y
>>> >> >> >> >>> > CONFIG_BT_HCIBCM203X=m
>>> >> >> >> >>> > CONFIG_BT_HCIBPA10X=m
>>> >> >> >> >>> > CONFIG_BT_HCIBFUSB=m
>>> >> >> >> >>> > CONFIG_BT_HCIVHCI=m
>>> >> >> >> >>> > CONFIG_AF_RXRPC=m
>>> >> >> >> >>> > # CONFIG_AF_RXRPC_DEBUG is not set
>>> >> >> >> >>> > CONFIG_RXKAD=m
>>> >> >> >> >>> > CONFIG_FIB_RULES=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Wireless
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_CFG80211=m
>>> >> >> >> >>> > CONFIG_NL80211=y
>>> >> >> >> >>> > CONFIG_WIRELESS_EXT=y
>>> >> >> >> >>> > CONFIG_MAC80211=m
>>> >> >> >> >>> > CONFIG_MAC80211_RCSIMPLE=y
>>> >> >> >> >>> > CONFIG_MAC80211_LEDS=y
>>> >> >> >> >>> > # CONFIG_MAC80211_DEBUGFS is not set
>>> >> >> >> >>> > # CONFIG_MAC80211_DEBUG is not set
>>> >> >> >> >>> > CONFIG_IEEE80211=m
>>> >> >> >> >>> > # CONFIG_IEEE80211_DEBUG is not set
>>> >> >> >> >>> > CONFIG_IEEE80211_CRYPT_WEP=m
>>> >> >> >> >>> > CONFIG_IEEE80211_CRYPT_CCMP=m
>>> >> >> >> >>> > CONFIG_IEEE80211_CRYPT_TKIP=m
>>> >> >> >> >>> > # CONFIG_IEEE80211_SOFTMAC is not set
>>> >> >> >> >>> > CONFIG_RFKILL=m
>>> >> >> >> >>> > CONFIG_RFKILL_INPUT=m
>>> >> >> >> >>> > CONFIG_RFKILL_LEDS=y
>>> >> >> >> >>> > CONFIG_NET_9P=m
>>> >> >> >> >>> > CONFIG_NET_9P_FD=m
>>> >> >> >> >>> > # CONFIG_NET_9P_DEBUG is not set
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Device Drivers
>>> >> >> >> >>> > #
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Generic Driver Options
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
>>> >> >> >> >>> > CONFIG_STANDALONE=y
>>> >> >> >> >>> > CONFIG_PREVENT_FIRMWARE_BUILD=y
>>> >> >> >> >>> > CONFIG_FW_LOADER=m
>>> >> >> >> >>> > # CONFIG_DEBUG_DRIVER is not set
>>> >> >> >> >>> > # CONFIG_DEBUG_DEVRES is not set
>>> >> >> >> >>> > # CONFIG_SYS_HYPERVISOR is not set
>>> >> >> >> >>> > CONFIG_CONNECTOR=m
>>> >> >> >> >>> > # CONFIG_MTD is not set
>>> >> >> >> >>> > # CONFIG_PARPORT is not set
>>> >> >> >> >>> > CONFIG_PNP=y
>>> >> >> >> >>> > CONFIG_PNP_DEBUG=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Protocols
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_PNPACPI=y
>>> >> >> >> >>> > CONFIG_BLK_DEV=y
>>> >> >> >> >>> > # CONFIG_BLK_DEV_FD is not set
>>> >> >> >> >>> > CONFIG_BLK_CPQ_DA=m
>>> >> >> >> >>> > # CONFIG_BLK_CPQ_CISS_DA is not set
>>> >> >> >> >>> > # CONFIG_BLK_DEV_DAC960 is not set
>>> >> >> >> >>> > # CONFIG_BLK_DEV_UMEM is not set
>>> >> >> >> >>> > # CONFIG_BLK_DEV_COW_COMMON is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_LOOP=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_CRYPTOLOOP=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_NBD=m
>>> >> >> >> >>> > # CONFIG_BLK_DEV_SX8 is not set
>>> >> >> >> >>> > # CONFIG_BLK_DEV_UB is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_RAM=y
>>> >> >> >> >>> > CONFIG_BLK_DEV_RAM_COUNT=16
>>> >> >> >> >>> > CONFIG_BLK_DEV_RAM_SIZE=65536
>>> >> >> >> >>> > CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
>>> >> >> >> >>> > # CONFIG_CDROM_PKTCDVD is not set
>>> >> >> >> >>> > CONFIG_ATA_OVER_ETH=m
>>> >> >> >> >>> > CONFIG_MISC_DEVICES=y
>>> >> >> >> >>> > CONFIG_IBM_ASM=m
>>> >> >> >> >>> > CONFIG_PHANTOM=m
>>> >> >> >> >>> > CONFIG_EEPROM_93CX6=m
>>> >> >> >> >>> > CONFIG_SGI_IOC4=m
>>> >> >> >> >>> > CONFIG_TIFM_CORE=m
>>> >> >> >> >>> > # CONFIG_TIFM_7XX1 is not set
>>> >> >> >> >>> > # CONFIG_ASUS_LAPTOP is not set
>>> >> >> >> >>> > # CONFIG_FUJITSU_LAPTOP is not set
>>> >> >> >> >>> > # CONFIG_MSI_LAPTOP is not set
>>> >> >> >> >>> > # CONFIG_SONY_LAPTOP is not set
>>> >> >> >> >>> > # CONFIG_THINKPAD_ACPI is not set
>>> >> >> >> >>> > CONFIG_IDE=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDE=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Please see Documentation/ide.txt for help/info on
>>> >> >> >> >>> IDE
>>> >> >> >> >>> drives
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # CONFIG_BLK_DEV_IDE_SATA is not set
>>> >> >> >> >>> > # CONFIG_BLK_DEV_HD_IDE is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDEDISK=m
>>> >> >> >> >>> > # CONFIG_IDEDISK_MULTI_MODE is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDECD=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDETAPE=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDEFLOPPY=m
>>> >> >> >> >>> > # CONFIG_BLK_DEV_IDESCSI is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDEACPI=y
>>> >> >> >> >>> > # CONFIG_IDE_TASK_IOCTL is not set
>>> >> >> >> >>> > CONFIG_IDE_PROC_FS=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # IDE chipset support/bugfixes
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_IDE_GENERIC=m
>>> >> >> >> >>> > # CONFIG_BLK_DEV_PLATFORM is not set
>>> >> >> >> >>> > # CONFIG_BLK_DEV_CMD640 is not set
>>> >> >> >> >>> > # CONFIG_BLK_DEV_IDEPNP is not set
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # PCI IDE chipsets support
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDEPCI=y
>>> >> >> >> >>> > # CONFIG_IDEPCI_SHARE_IRQ is not set
>>> >> >> >> >>> > # CONFIG_IDEPCI_PCIBUS_ORDER is not set
>>> >> >> >> >>> > # CONFIG_BLK_DEV_OFFBOARD is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_GENERIC=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_OPTI621=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_RZ1000=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDEDMA_PCI=y
>>> >> >> >> >>> > CONFIG_BLK_DEV_AEC62XX=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_ALI15X3=m
>>> >> >> >> >>> > # CONFIG_WDC_ALI15X3 is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_AMD74XX=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_ATIIXP=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_CMD64X=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_TRIFLEX=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_CY82C693=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_CS5520=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_CS5530=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_HPT34X=m
>>> >> >> >> >>> > # CONFIG_HPT34X_AUTODMA is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_HPT366=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_JMICRON=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_SC1200=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_PIIX=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_IT8213=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_IT821X=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_NS87415=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_PDC202XX_OLD=m
>>> >> >> >> >>> > # CONFIG_PDC202XX_BURST is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_PDC202XX_NEW=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_SVWKS=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_SIIMAGE=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_SIS5513=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_SLC90E66=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_TRM290=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_VIA82CXXX=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_TC86C001=m
>>> >> >> >> >>> > # CONFIG_IDE_ARM is not set
>>> >> >> >> >>> > CONFIG_BLK_DEV_IDEDMA=y
>>> >> >> >> >>> > CONFIG_IDE_ARCH_OBSOLETE_INIT=y
>>> >> >> >> >>> > # CONFIG_BLK_DEV_HD is not set
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # SCSI device support
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_RAID_ATTRS=m
>>> >> >> >> >>> > CONFIG_SCSI=m
>>> >> >> >> >>> > CONFIG_SCSI_DMA=y
>>> >> >> >> >>> > CONFIG_SCSI_TGT=m
>>> >> >> >> >>> > CONFIG_SCSI_NETLINK=y
>>> >> >> >> >>> > CONFIG_SCSI_PROC_FS=y
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # SCSI support type (disk, tape, CD-ROM)
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_BLK_DEV_SD=m
>>> >> >> >> >>> > CONFIG_CHR_DEV_ST=m
>>> >> >> >> >>> > CONFIG_CHR_DEV_OSST=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_SR=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_SR_VENDOR=y
>>> >> >> >> >>> > CONFIG_CHR_DEV_SG=m
>>> >> >> >> >>> > CONFIG_CHR_DEV_SCH=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # Some SCSI devices (e.g. CD jukebox) support multiple
>>> >> >> >> >>> LUNs
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_SCSI_MULTI_LUN=y
>>> >> >> >> >>> > CONFIG_SCSI_CONSTANTS=y
>>> >> >> >> >>> > CONFIG_SCSI_LOGGING=y
>>> >> >> >> >>> > CONFIG_SCSI_SCAN_ASYNC=y
>>> >> >> >> >>> > CONFIG_SCSI_WAIT_SCAN=m
>>> >> >> >> >>> >
>>> >> >> >> >>> > #
>>> >> >> >> >>> > # SCSI Transports
>>> >> >> >> >>> > #
>>> >> >> >> >>> > CONFIG_SCSI_SPI_ATTRS=m
>>> >> >> >> >>> > CONFIG_SCSI_FC_ATTRS=m
>>> >> >> >> >>> > CONFIG_SCSI_FC_TGT_ATTRS=y
>>> >> >> >> >>> > CONFIG_SCSI_ISCSI_ATTRS=m
>>> >> >> >> >>> > CONFIG_SCSI_SAS_ATTRS=m
>>> >> >> >> >>> > CONFIG_SCSI_SAS_LIBSAS=m
>>> >> >> >> >>> > CONFIG_SCSI_SAS_ATA=y
>>> >> >> >> >>> > # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
>>> >> >> >> >>> > CONFIG_SCSI_SRP_ATTRS=m
>>> >> >> >> >>> > CONFIG_SCSI_SRP_TGT_ATTRS=y
>>> >> >> >> >>> > CONFIG_SCSI_LOWLEVEL=y
>>> >> >> >> >>> > CONFIG_ISCSI_TCP=m
>>> >> >> >> >>> > CONFIG_BLK_DEV_3W_XXXX_RAID=m
>>> >> >> >> >>> > CONFIG_SCSI_3W_9XXX=m
>>> >> >> >> >>> > CONFIG_SCSI_ACARD=m
>>> >> >> >> >>> > CONFIG_SCSI_AACRAID=m
>>> >> >> >> >>> > CONFIG_SCSI_AIC7XXX=m
>>> >> >> >> >>> > CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
>>> >> >> >> >>> > CONFIG_AIC7XXX_RESET_DELAY_MS=15000
>>> >> >> >> >>> > CONFIG_AIC7XXX_DEBUG_ENABLE=y
>>> >> >> >> >>> > CONFIG_AIC7XXX_DEBUG_MASK=0
>>> >> >> >> >>> > CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
>>> >> >> >> >>> > CONFIG_SCSI_AIC7XXX_OLD=m
>>> >> >> >> >>> > CONFIG_SCSI_AIC79XX=m
>>> >> >> >> >>> > CONFIG_AIC79XX_CMDS_PER_DEVICE=32
>>> >> >> >> >>> > CONFIG_AIC79XX_RESET_DELAY_MS=15000
>>> >> >> >> >>> > CONFIG_AIC79XX_DEBUG_ENABLE=y
>>> >> >> >> >>> > CONFIG_AIC79XX_DEBUG_MASK=0
>>> >> >> >> >>> > CONFIG_AIC79XX_REG_PRETTY_PRINT=y
>>> >> >> >> >>> > CONFIG_SCSI_AIC94XX=m
>>> >> >> >> >>> > # CONFIG_AIC94XX_DEBUG is not set
>>> >> >> >> >>> > CONFIG_SCSI_ADVANSYS=m
>>> >> >> >> >>> > CONFIG_SCSI_ARCMSR=m
>>> >> >> >> >>> > # CONFIG_SCSI_ARCMSR_AER is not set
>>> >> >> >> >>> > CONFIG_MEGARAID_NEWGEN=y
>>> >> >> >> >>> > CONFIG_MEGARAID_MM=m
>>> >> >> >> >>> > CONFIG_MEGARAID_MAILBOX=m
>>> >> >> >> >>> > CONFIG_MEGARAID_LEGACY=m
>>> >> >> >> >>> > CONFIG_MEGARAID_SAS=m
>>> >> >> >> >>> > CONFIG_SCSI_HPTIOP=m
>>> >> >> >> >>> > CONFIG_SCSI_BUSLOGIC=m
>>> >> >> >> >>> > # CONFIG_SCSI_OMIT_FLASHPOINT is not set
>>> >> >> >> >>> > CONFIG_SCSI_DMX3191D=m
>>> >> >> >> >>> > CONFIG_SCSI_EATA=m
>>> >> >> >> >>> > CONFIG_SCSI_EATA_TAGGED_QUEUE=y
>>> >> >> >> >>> > CONFIG_SCSI_EATA_LINKED_COMMANDS=y
>>> >> >> >> >>> > CONFIG_SCSI_EATA_MAX_TAGS=16
>>> >> >> >> >>> > CONFIG_SCSI_FUTURE_DOMAIN=m
>>> >> >> >> >>> > CONFIG_SCSI_GDTH=m
>>> >> >> >> >>> > CONFIG_SCSI_IPS=m
>>> >> >> >> >>> > CONFIG_SCSI_INITIO=m
>>> >> >> >> >>> > CONFIG_SCSI_INIA100=m
>>> >> >> >> >>> > CONFIG_SCSI_STEX=m
>>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_2=m
>>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
>>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
>>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
>>> >> >> >> >>> > CONFIG_SCSI_SYM53C8XX_MMIO=y
>>> >> >> >> >>> > CONFIG_SCSI_IPR=m
>>> >> >> >> >>> > # CONFIG_SCSI_IPR_TRACE is not set
>>> >> >> >> >>> > # CONFIG_SCSI_IPR_DUMP is not set
>>> >> >> >> >>> > CONFIG_SCSI_QLOGIC_1280=m
>>> >> >> >> >>> > CONFIG_SCSI_QLA_FC=m
>>> >> >> >> >>> > CONFIG_SCSI_QLA_ISCSI=m
>>> >> >> >> >>> > CONFIG_SCSI_LPFC=m
>>> >> >> >> >>> > CONFIG_SCSI_DC395x=m
>>> >> >> >> >>> > CONFIG_SCSI_DC390T=m
>>> >> >> >> >>> > CONFIG_SCSI_DEBUG=m
>>> >> >> >> >>> > CONFIG_SCSI_SRP=m
>>> >> >> >> >>> > CONFIG_ATA=m
>>> >> >> >> >>> > # CONFIG_ATA_NONSTANDARD is not set
>>> >> >> >> >>> > CONFIG_ATA_ACPI=y
>>> >> >> >> >>> > CONFIG_SATA_AHCI=m
>>> >> >> >> >>> > CONFIG_SATA_SVW=m
>>> >> >> >> >>> > CONFIG_ATA_PIIX=m
>>> >> >> >> >>> > CONFIG_SATA_MV=m
>>> >> >> >> >>> > CONFIG_SATA_NV=m
>>> >> >> >> >>> > CONFIG_PDC_ADMA=m
>>> >> >> >> >>> > CONFIG_SATA_QSTOR=m
>>> >> >> >> >>> > CONFIG_SATA_PROMISE=m
>>> >> >> >> >>> > CONFIG_SATA_SX4=m
>>> >> >> >> >>> > CONFIG_SATA_SIL=m
>>> >> >> >> >>> > CONFIG_SATA_SIL24=m
>>> >> >> >> >>> > CONFIG_SATA_SIS=m
>>> >> >> >> >>> > CONFIG_SATA_ULI=m
>>> >> >> >> >>> > CONFIG_SATA_VIA=m
>>> >> >> >> >>> > CONFIG_SATA_VITESSE=m
>>> >> >> >> >>> > CONFIG_SATA_INIC162X=m
>>> >> >> >> >>> > # CONFIG_PATA_ACPI is not set
>>> >> >> >> >>> > # CONFIG_PATA_ALI is not set
>>> >> >> >> >>> > # CONFIG_PATA_AMD is not set
>>> >> >> >> >>> > CONFIG_PATA_ARTOP=m
>>> >> >> >> >>> > # CONFIG_PATA_ATIIXP is not set
>>> >> >> >> >>> > # CONFIG_PATA_CMD640_PCI is not set
>>> >> >> >> >>> > # CONFIG_PATA_CMD64X is not set
>>> >> >> >> >>> > # CONFIG_PATA_CS5520 is not set
>>> >> >> >> >>> > # CONFIG_PATA_CS5530 is not set
>>> >> >> >> >>> > # CONFIG_PATA_CYPRESS is not set
>>> >> >> >> >>> > # CONFIG_PATA_EFAR is not set
>>> >> >> >> >>> > CONFIG_ATA_GENERIC=m
>>> >> >> >> >>> > # CONFIG_PATA_HPT366 is not set
>>> >> >> >> >>> > # CONFIG_PATA_HPT37X is not set
>>> >> >> >> >>> > # CONFIG_PATA_HPT3X2N is not set
>>> >> >> >> >>> > # CONFIG_PATA_HPT3X3 is not set
>>> >> >> >> >>> > # CONFIG_PATA_IT821X is not set
>>> >> >> >> >>>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-FastUDPSource-Ensure-skb-is-free.patch
Type: text/x-patch
Size: 991 bytes
Desc: not available
Url : http://amsterdam.lcs.mit.edu/pipermail/click/attachments/20090411/54530301/attachment-0001.bin
More information about the click
mailing list