[Click] Roofnet on OPENWRT

[Roberto Riggio]

Is there a reference where I can identify the click modules that are 
atheros-Dependant?

To your knowledge how deep are the changes that should be made in order
to make click/roofnet works also under the broadcom platform?

John Bicket wrote:
> Hi,
> 
> Roofnet only runs with atheros cards right now.
> 
> John
> 
> -----Original Message-----
> From: Roberto Riggio <roberto.riggio at create-net.org>
> Date: Thu, 23 Mar 2006 19:13:20 
> To:click at amsterdam.lcs.mit.edu
> Subject: [Click] Roofnet on OPENWRT
> 
> Hi everyone,
> 
> my name's Roberto and this is the first time that I post on this ml.
> 
> I'm a PhD student at the university of Trento (Italy) and I'm deploying 
> a WMN in out labs. At the present stage we are evaluating different 
> platforms (like Microsoft's MCL).
> 
> We would like to deploy a WMN based on roofnet using the Asus WL-500g 
> Deluxe as mesh nodes (with OpenWRT).
> 
> We were able to cross-compile click for those devices, however since at 
> the moment e have just one router we are not able to test the roofnet 
> functionalities.
> 
> Here come the question. In order to run roofnet it is mandatory to have 
> an Atheros wifi card? If, not, we could run in some limitation by using 
> the broadcom adapter that is shipped with our future mesh nodes?
> 
> Thanks
> 


-- 
=========================================
Roberto Riggio
Research Staff Member
CREATE-NET
Polo Tecnologico, Via Solteri 38
38100 Trento - Italy
e-mail: roberto.riggio at create-net.org
Phone: +39 0461 408400 ext:708
Fax: +39 0461 421157
www.create-net.org
=========================================