[Click] problem in setting up madwifi/stripped station

[Indian Mogul]

Thanks John. I started the scan.pl and I ran into
errors:

ERROR No servers available, start one (yes)?
ERROR No servers available, start one (yes)?
Can't exec "set_channel.pl": No such file or directory
at ./scan.pl line 27.
scanning b:   1/ 11ERROR No servers available, start
one (yes)?
Can't exec "set_channel.pl": No such file or directory
at ./scan.pl line 27.
  2/ 11ERROR No servers available, start one (yes)?
Can't exec "set_channel.pl": No such file or directory
at ./scan.pl line 27.
  3/ 11ERROR No servers available, start one (yes)?
Can't exec "set_channel.pl": No such file or directory
at ./scan.pl line 27.
  4/ 11ERROR No servers available, start one (yes)?

Do u know where the set_channel.pl is? not in the cvs
since I did a cvs update and found none!!!!! 

Thanks for u r help, 
IM

--- John Bicket <jbicket at amsterdam.lcs.mit.edu> wrote:

> Hi IM,
> 
> There are some scripts in the click/conf/wifi
> directory that give
> examples on how to do this. 
> 
> For instance, "scan.pl" will run a scan, and
> "associate.pl <ssid>"
> will change the channel and start the association
> mechanism.
> 
> After doing this, you should be able to run 
> dhcpd station
> which should work.
> 
> --jbicket
> 
> 
> Indian Mogul [indian_mogul at yahoo.com] wrote:
> >Hi, 
> >     I am having problems in setting up ahost as an
> >station. I am using the station.click sript. I have
> a
> >wireless card with Atheros chipset. Here is the
> >procedure I am following:
> >
> >1. Compile click with the options:
> > /configure --enable-linuxmodule  --enable-wifi
> >--enable-intel-cpu 
> --with-linux=/usr/src/linux-2.4.26
> >--with-linux-map=/usr/src/linux-2.4.26/System.map
> >
> >2. Compile madwifi stripped driver with gmake. 
> >3. Then, insmod ath_hal.o and insmod ath_pci.o
> >4. ath0 gets detected at this time.
> >5. Now, I do the following:
> >   click-install station.click
> >6. I only the following output
> >expensive Packet::push; have 8 wanted 24
> >expensive Packet::push; have 8 wanted 24
> >
> >and nothing happens. 
> >
> >7. How do I set the winfo handlers?  Also,how do I
> >trigger the beaconscanner , probe request? 
> >
> >8. if I try to run dhcpcd on ath0, with 'iwconfig
> ath0
> >essid any', no IP address is obtained.
> >
> >Could you please help me in this? 
> >
> >Thanks,
> >IM
> >
> >
> >
> >		
> >__________________________________ 
> >Do you Yahoo!? 
> >Yahoo! Small Business - Try our new resources site!
> >http://smallbusiness.yahoo.com/resources/ 
> >_______________________________________________
> >click mailing list
> >click at amsterdam.lcs.mit.edu
>
>https://amsterdam.lcs.mit.edu/mailman/listinfo/click
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com