[Click] Error in Intel Pro Ethernet modules
Indian Mogul
indian_mogul at yahoo.com
Fri Mar 4 12:08:41 EST 2005
Thanks Beyers. The driver version for e1000 is 5.2.30.
The device id is 0x100e which is present in the
e1000_pci_tbl[] (e1000_main.c). The controller is
82540EM Gbit Ethernet controller, which I checked to
be supported by this version of the e1000 driver
(5.2.30) (e1000_main.c).
I just want to know what are the files that needs to
be touched in click to get this working? I want it to
do it myself and upload the patch. Any pointers to the
above will be welcome. I am also doing a google search
on the click website.
Regards,
IM
--- Beyers Cronje <bcronje at gmail.com> wrote:
> Hi Indian,
>
> You're probable using an unsupported e1000 card for
> this driver. Check
> the device ID and Controller version using scanpci
> and have a look in
> e1000_hw.h to verify that your setup in supported.
>
> I have patched polling driver of e1000 v. 5.2.16
> which might support
> your card. I wouldn't recommend this driver for
> production environments
> though as I've picked up a small percentage of
> packet loss not seen in
> the click released e1000 driver.
>
> I'm busy playing on a polling driver based on the
> e1000 v.5.7.6 (latest
> Intel driver). When/if I get it working I'll let you
> know.
>
> Regards
>
> Beyers
>
> Indian Mogul wrote:
>
> >Hi,
> >
> >I am facing some problems while trying to extract
> >packets using PollDevice(). I have two Intel Pro
> >1000 cards and am running on kernel 2.4.26 which
> has
> >been properly patched with the cvs click patches
> >(v1.4.3)
> >----
> >click_conf.conf:36: While configuring 'PollDevice at 6
> ::
> >PollDevice':
> > device 'eth1' not pollable, use FromDevice
> instead
> >/home/click/router_conf/click_conf.conf:47:
> > While configuring 'PollDevice at 15 :: PollDevice':
> > device 'eth2' not pollable, use FromDevice
> instead
> >Router could not be initialized!
> >---
> >Following is the o/p from /proc/interrupts:
> > CPU0
> > 0: 59169236 XT-PIC timer
> > 1: 17 XT-PIC keyboard
> > 2: 0 XT-PIC cascade
> > 3: 295835 XT-PIC eth1
> > 4: 173 XT-PIC serial
> > 8: 2 XT-PIC rtc
> > 9: 4338563 XT-PIC acpi, eth0,
> usb-uhci
> > 11: 295835 XT-PIC eth2
> > 14: 177169 XT-PIC ide0
> > 15: 3064438 XT-PIC ide1
> >NMI: 0
> >LOC: 59167832
> >ERR: 0
> >MIS: 0
> >
> >Thanks for u r help in advance,
> >IM
> >
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Tired of spam? Yahoo! Mail has the best spam
> protection around
> >http://mail.yahoo.com
> >_______________________________________________
> >click mailing list
> >click at amsterdam.lcs.mit.edu
>
>https://amsterdam.lcs.mit.edu/mailman/listinfo/click
> >
> >
> >
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the click
mailing list