[Click] e1000 netpoll

[Beyers Cronje]

Hi Roman,

Did you compile and install the driver while running the 2.4.26 kernel ?

On 6/22/05, rchertov at purdue.edu <rchertov at purdue.edu> wrote:
> Quoting Beyers Cronje <bcronje at gmail.com>:
> 
> > Hi Roman,
> >
> > Have a look in click-1.4.3/drivers. You need to compile and install
> > the Polling driver supplied.
> 
> I have compiled and installed the e1000 driver for the 2.4.x kernel; however, I
> cannot insmod (or modprobe) the module.
> "/lib/modules/2.4.26/kernel/drivers/net/e1000.o: init_module: No such device"
> Dmesg and syslogs do not reveal much insightfull information about the cause of
> the failure.  The 5.x.x and the 6.x.x e1000 drivers work fine but they do not
> have the click hooks.  Any info would be much appreciated.
> 
> Sincerely,
> 
> Roman
> 
> P.S. hopefully this is a routine problem
> 
> 
> 
> >
> > Beyers
> >
> > On 6/22/05, rchertov at purdue.edu <rchertov at purdue.edu> wrote:
> > > Hello,
> > >   I am using click-1.4.3 with the 2.4.26 kernel.  My machine has e1000
> > drivers
> > > with NAPI enabled.  According to click, the driver does not support
> > PollDevice
> > > and the patch for the 2.4.26 kernel performs no modificiations to the
> > e1000
> > > driver that I can see.  (eepro100 and tulip but no e1000).  The FAQ
> > however
> > > states that e1000 is supported with special hooks for polling so I am
> > curious
> > > what I am missing to make this happen.
> > >
> > >
> > > Thanks,
> > >
> > > Roman Chertov
> > >
> > >
> > > _______________________________________________
> > > click mailing list
> > > click at amsterdam.lcs.mit.edu
> > > https://amsterdam.lcs.mit.edu/mailman/listinfo/click
> > >
> >
> >
> 
> 
> 
>