[Click] Wireless to wired bridge

[John Bicket]

Do you have a FromDevice(eth0) in your configuration?
I think the issue is that you have to figure out which packets should
be forwarded to the wireless device based on who is associated.


--john

Nels Anderson [Nels.Anderson at colorado.edu] wrote:
>Aloha,
>
>Hello again, I'm wondering if anything has ever created a click config that
>bridges the madwifi.stripped wireless and a wired connection.  The setup is
>I've got a box with a normal wired ethernet interface that's acting as an
>access point and I want the click config to just bridge any wireless packets it
>gets, after the proper en/decapsulation, to eth0.
>
>I modified the gen_config_ap script that the packets go to eth0 instead of to
>the linux stack via the click interface (and vica versa).  However, this
>doesn't seem to completely work.  I can see packets coming off the wireless and
>going out the wired, but they don't seem to come back.  Or if they are, they
>definitely aren't going back to the wireless station.  It seems like this
>should be pretty easy, but I probably missing something.  As always, any
>assistance/advice is greatly appreciated.  Thanks,
>
>-Nels
>_______________________________________________
>click mailing list
>click at amsterdam.lcs.mit.edu
>https://amsterdam.lcs.mit.edu/mailman/listinfo/click