[Click] for help on Roofnet

[欧阳鑫]

Thank you very much. I have done the experiment for long time, but always
meet some questions.
If the official mac80211modules do not support the rate and the retries
radiotap fields, the new Atheros wireless cards drived by ath9k cant't work
at Rate 1 and 2,  does this have some relation with the
reason(mac80211modules do not support the rate and the retries radiotap
fields)?
The attachment is my configuration file: gen_config_roofnet.pl. Can you help
me check up if there is some error?
Thank you very much!

2011/1/10 Roberto Riggio <roberto.riggio at create-net.org>

> Il 09/01/2011 12:39, 欧阳鑫 ha scritto:
> > Hi everyone,
> >       We are running experiments with Roofnet on PCs. I have downloaded
> > click-1.8.0, and configured, make, make install it successfully. Then
> > I run: "./gen_config_roofnet.pl --dev wlan0 | click -" on TWO PCs. The
> > problem is, we cannot ping each other on the 2 PCs.  We do not have
> > the old Atheros wireless cards, but use the new Atheros wireless cards
> > (802.11n supported) drived by ath9k. I am not sure if this is ok.
> it should work. However as far as I remember the official mac80211
> modules do not support the rate and the retries radiotap fields. I
> assume that in this case you are always transmitting at the base rate.
> > The srcr interface's HWaddr is
> Yes
> > On PC1, "./read_handler srcr/es.bcast_stats" shows
> >
> > 200 Read handler 'srcr/es.bcast_stats' OK
> > DATA 360
> > 5.32.234.144 00-25-86-20-EA-90 seq 1294477713 period 30000 tau 300000
> sent
> > 45 last_rx 10.843367
> > 5.32.234.144 00-25-86-20-EA-90 [ 2 60 0 0 -1 -1 ]
> > 5.32.234.144 00-25-86-20-EA-90 [ 2 1500 0 0 -1 -1 ]
> > 5.32.234.144 00-25-86-20-EA-90 [ 4 1500 0 0 -1 -1 ]
> > 5.32.234.144 00-25-86-20-EA-90 [ 11 1500 100 100 0 0 ]
> > 5.32.234.144 00-25-86-20-EA-90 [ 22 1500 100 100 0 0 ]
> this is strange because it looks like you are transmitting and receiving
> probes at both 5.5 and 11 Mbps but not at the lower rates.
> >
> > On PC2, "./read_handler srcr/es.bcast_stats":
> >
> > 200 Read handler 'srcr/es.bcast_stats' OK
> > DATA 352
> > 5.167.1.211 00-25-86-A7-01-D3 seq 1294477686 period 30000 tau 300000 sent
> 36
> > last_rx 3.115970
> > 5.167.1.211 00-25-86-A7-01-D3 [ 2 60 0 100 0 0 ]
> > 5.167.1.211 00-25-86-A7-01-D3 [ 2 1500 0 100 0 0 ]
> > 5.167.1.211 00-25-86-A7-01-D3 [ 4 1500 0 100 0 0 ]
> > 5.167.1.211 00-25-86-A7-01-D3 [ 11 1500 100 100 0 0 ]
> > 5.167.1.211 00-25-86-A7-01-D3 [ 22 1500 85 100 0 0 ]
> this means that you are receiving probes for every rate but you
> are successfully transmitting only at the 5.5. and 11 rates
> > The questions are:
> > (1) Why as neighbors, PC1 and PC2 cannot ping each other?
> because you have no routes and you have no routes because
> the probes at the lowest rate (1 Mbps) are not transmitted
> >   (2) srcr/lt.routes shows no data, Is this OK?
> no
> > (3) Each PC has 3 interfaces, srcr, rate and wlan0. Which one should
> > be used to do experiments (like COPE)?
> srcr
> > _______________________________________________
> > click mailing list
> > click at amsterdam.lcs.mit.edu
> > https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>
>
> _______________________________________________
> click mailing list
> click at amsterdam.lcs.mit.edu
> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gen_config_roofnet.pl
Type: application/octet-stream
Size: 10834 bytes
Desc: not available
Url : http://amsterdam.lcs.mit.edu/pipermail/click/attachments/20110110/2f6ef8d4/attachment-0001.obj