[Click] userlevel performance
Cliff Frey
cliff at meraki.com
Thu Oct 28 16:58:50 EDT 2010
I don't have a setup that I can easily/quickly use to test. All the same,
I'm curious what the interface statistics do during this time on both of the
interfaces (i.e. any errors? how many packets transmitted/received)
Also, I'm curious what was going on inside of ToDevice and FromDevice. The
linuxmodule version of these elements have a bunch of counters (visible
through the "calls" handler), it would be cool if the userlevel versions had
these things too (i.e. run_select_count, packets for both, write_errors,
empty_pulls for ToDevice, recvfrom_errors, recvfrom_eagains for fromdevice)
I doubt it, but you also might get different behavior if you add a Queue
between the ratedsource and the todevice.
Cliff
On Thu, Oct 28, 2010 at 10:55 AM, Roman Chertov <rchertov at cs.ucsb.edu>wrote:
> Hello,
>
> I was curious if anybody could try this test for me using userlevel click.
> I am
> running CentOS 5.5 2.6.18-194.17.1.el5, and I have two network cards
> connected
> with a single cable. If I run the script below using userlevel click,
> FromDevice(eth3) will receive very few packets and the majority would end
> up
> dropped on input.
>
> src :: RatedSource(\<00>, LENGTH 1458, RATE 8000, LIMIT 100000)
> -> UDPIPEncap(10.0.1.1, 6667, 20.0.0.2, 6667)
> -> EtherEncap(0x0800, 00:30:48:F9:EA:7B, 00:17:cb:0d:f8:db)
> -> ctr1 :: AverageCounter
> -> ToDevice(eth2);
>
>
> fd :: FromDevice(eth3, SNIFFER false, PROMISC true)
> -> ctr2 :: AverageCounter
> -> Discard;
>
> This script just requires ethX names to be changed; otherwise, it can be
> run as
> is.
>
> [root]# click test2.click -h ctr1.count -h ctr2.count
> ctr1.count:
> 100000
>
> ctr2.count:
> 4482
>
> Roman
>
>
> _______________________________________________
> click mailing list
> click at amsterdam.lcs.mit.edu
> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
>
More information about the click
mailing list