[Click] Kernel and Intel Driver Versions and Click Patches
Joonwoo Park
joonwpark81 at gmail.com
Tue Apr 14 20:43:42 EDT 2009
Tom,
On Tue, Apr 14, 2009 at 4:30 PM, Tom Gibson <tom.gibson at ipvidnet.com> wrote:
> Joonwoo,
>
> At least FastUDPSource is mainly for performance / benchmark type testing
> and nothing that critical. The performance change seems pretty drastic
> (over 15 times slower) so I don't know what the right answer is as far as
> making a patch. Maybe it's just something to track for now in the bug list.
As a matter of fact, I don't know either :(
But as I mentioned earlier, we might need to fix this problem rather
than having crashing kernel at least we support bond device.
I'll be happy if someone on this thread give a better direction.
BTW, maybe I don't quiet follow this discussion. How did you measure
the performance without this patch?
>
> I'll do some more testing with InfiniteSource and some other elements to and
> let you know if I get any good information.
>
> Thanks for your work this past weekend getting that patch.
Your very welcome. I'm sorry for that I couldn't give you a perfect solution.
Joonwoo.
>
> -Tom
>
> On Tue, Apr 14, 2009 at 11:26 AM, Joonwoo Park <joonwpark81 at gmail.com>
> wrote:
>>
>> Tom,
>>
>> Good to hear your good news.
>> About the performance, I don't know how the other people think, we
>> probably improve FastUDPSource with alternative way something like use
>> skb list to avoid waiting for skb is released.
>> However I think you might get more performance with using multiple
>> instances of FastUDPSource at the same time.
>> If you do that, you might have additional benefit of multi-threaded
>> click as well. I guess
>>
>> Joonwoo
>>
>> On Mon, Apr 13, 2009 at 4:22 PM, Tom Gibson <tom.gibson at ipvidnet.com>
>> wrote:
>> > Joonwoo,
>> >
>> > I only just now got in the office to test it. The VPN was giving me
>> > problems yesterday.
>> >
>> > The good news is with the patch it doesn't crash anymore. The bad news
>> > is
>> > that it seems to generate traffic much slower than expected.
>> >
>> > I have 3 Gigabit ports bonded and it seems to max out around 25 MiB/s
>> > which
>> > is nowhere near line rate for even a single Gig port.
>> >
>> > -Tom
>> >
>> > On Sat, Apr 11, 2009 at 10:40 PM, Joonwoo Park <joonwpark81 at gmail.com>
>> > wrote:
>> >>
>> >> Tom, Can you please test this patch?
>> >>
>> >> Eddie, I think the FastUDPSource shouldn't recycle skb until we make
>> >> sure the skb is freed.
>> >> In case of bonddev's hard_start_xmit, it is queuing skb which is
>> >> possible not to freed until next calling of FastUDPSource::pull.
>> >> So this patch makes FastUDPSource::pull to check the skb is good to
>> >> recycle.
>> >>
>> >> BTW, I think the thread problem that I mentioned on this thread wasn't
>> >> problem. It looks like I made a mistake to make a click config.
>> >> Sorry for that.
>> >>
>> >> Joonwoo
>> >>
>> >> On Tue, Apr 7, 2009 at 1:16 PM, Tom Gibson <tom.gibson at ipvidnet.com>
>> >> wrote:
>> >> > Joonwoo,
>> >> >
>> >> > I tried to reply from my phone, but it looks like it didn't work.
>> >> >
>> >> > I looked into this a bit more and found that GDB reports the crash
>> >> > happening
>> >> > during execution of line 758 in skbuff.h:
>> >> >
>> >> > static inline struct sk_buff *__skb_dequeue(struct sk_buff_head
>> >> > *list)
>> >> > {
>> >> > struct sk_buff *next, *prev, *result;
>> >> >
>> >> > prev = (struct sk_buff *) list;
>> >> > next = prev->next;
>> >> > result = NULL;
>> >> > if (next != prev) {
>> >> > result = next;
>> >> > next = next->next;
>> >> > list->qlen--;
>> >> > next->prev = prev; <-------
>> >> > prev->next = next;
>> >> > result->next = result->prev = NULL;
>> >> > }
>> >> > return result;
>> >> > }
>> >> >
>> >> > Is the code missing a NULL pointer check? Is Linux designed so the
>> >> > sk_buff->next field is always suposed to be a valid pointer?
>> >> >
>> >> > This latest test was using the click 1.7 rc1 version + your patches
>> >> > for
>> >> > E1000e NAPI polling mode. I migrated your posted patch to a new
>> >> > patch
>> >> > file
>> >> > for the 1.7 rc1 version. It's actually my first time making a patch
>> >> > file
>> >> > :)
>> >> >
>> >> > The E1000e driver is doing good so far. If I set my click config to
>> >> > use
>> >> > 4
>> >> > seperate UDP blasters, working on individual ethX ports, I don't get
>> >> > any
>> >> > crash and it goes fine at 4gbps. Gnome's System Monitor wont stay
>> >> > open
>> >> > if
>> >> > you go over 400MiB/s though lol.
>> >> >
>> >> > I'm wondering if the crash could be from something patched in a newer
>> >> > kernel
>> >> > version. I'm learning a bit about diffutils, but I'm still not ready
>> >> > to
>> >> > attempt porting the click patches to the latest kernel. I guess I
>> >> > can
>> >> > at
>> >> > least get the latest stable kernel and do a diff on skbuff.h.
>> >> >
>> >> > If you have any other tips or want me to run some test(s), let me
>> >> > know.
>> >> >
>> >> > Thanks,
>> >> >
>> >> > Tom
>> >> >
>> >> >
>> >> > On Mon, Apr 6, 2009 at 8:58 PM, Tom Gibson <tom.gibson at ipvidnet.com>
>> >> > wrote:
>> >> >>
>> >> >> I'll find out tomorrow and send you an e-mail.
>> >> >>
>> >> >> That's some good info on how to get the source code line. Thanks.
>> >> >>
>> >> >> -Tom
>> >> >>
>> >> >> On Mon, Apr 6, 2009 at 8:50 PM, Joonwoo Park <joonwpark81 at gmail.com>
>> >> >> wrote:
>> >> >>>
>> >> >>> Hi Tom
>> >> >>>
>> >> >>> On Mon, Apr 6, 2009 at 7:56 PM, Tom Gibson
>> >> >>> <tom.gibson at ipvidnet.com>
>> >> >>> wrote:
>> >> >>> > It's easy to reproduce. It happens within a second of installing
>> >> >>> > Click
>> >> >>> > if I
>> >> >>> > use the bonding driver and transmit too fast. It's a 2x
>> >> >>> > quad-core
>> >> >>> > server so
>> >> >>> > I don't know if the SMP characteristics will be a lot different
>> >> >>> > than
>> >> >>> > a
>> >> >>> > single quadcore.
>> >> >>> >
>> >> >>> > I can setup remote access to my servers through a VPN if you're
>> >> >>> > interested.
>> >> >>> > I'm not sure the best way to debug this type of Kernel thing.
>> >> >>> > I've
>> >> >>> > been
>> >> >>> > wondering about using GDB stubs through an RS232 cable or
>> >> >>> > something.
>> >> >>> >
>> >> >>>
>> >> >>> FYI, you can know the exact source code line with following steps
>> >> >>> go to linux dir
>> >> >>> $ make menuconfig -> kernel hacking -> select 'Compile the kernel
>> >> >>> with
>> >> >>> debug info' and 'Compile the kernel with frame pointer'
>> >> >>> then build linux, install and then reboot with new kernel
>> >> >>> go to click dir
>> >> >>> do configure again with same configure command line which you have
>> >> >>> been
>> >> >>> using
>> >> >>> $ make clean
>> >> >>> $ make install
>> >> >>> and run click with your config file.
>> >> >>>
>> >> >>> And if you can get kernel oops again
>> >> >>> $ gdb vmlinux (if the oops occurs from kernel itself)
>> >> >>> or
>> >> >>> $ gdb click.ko (if the oops occurs from click itself but your
>> >> >>> previous
>> >> >>> call stack said that the oops came from kernel)
>> >> >>>
>> >> >>> from gdb shell type:
>> >> >>> info line *<address of function> (ie. from your dump, type: info
>> >> >>> line
>> >> >>> *pfifo_fast_dequeue+0x48)
>> >> >>>
>> >> >>> Hopefully will give you a hint. Please let me know which line is
>> >> >>> making
>> >> >>> oops.
>> >> >>>
>> >> >>> Joonwoo
>> >> >>>
>> >> >>> > -Tom
>> >> >>> >
>> >> >>> > On Mon, Apr 6, 2009 at 5:14 PM, Joonwoo Park
>> >> >>> > <joonwpark81 at gmail.com>
>> >> >>> > wrote:
>> >> >>> >>
>> >> >>> >> Hi folks,
>> >> >>> >>
>> >> >>> >> I've tried to reproduce kernel oops with your kernel config and
>> >> >>> >> click
>> >> >>> >> config.
>> >> >>> >> However I couldn't reproduce kernel oops unfortunately. I was
>> >> >>> >> guessing bonded device cause a problem.
>> >> >>> >> But for me I didn't happen. I'm using qemu to test click at
>> >> >>> >> this
>> >> >>> >> time
>> >> >>> >> because I'm not seeing any hardware specific involvement with
>> >> >>> >> your
>> >> >>> >> call stack trace. (but probably I'm wrong)
>> >> >>> >> Tom, does the problem (kernel oops) is always repeatable?
>> >> >>> >>
>> >> >>> >> BTW, I think we have another problem or possible regression.
>> >> >>> >> With the latest git version of click, although I'm using single
>> >> >>> >> threaded config with SMP linux. I can see ToDevice which stops
>> >> >>> >> pulling packets in few minutes.
>> >> >>> >> I believed that we (actually Eddie) had fixed this problem few
>> >> >>> >> months
>> >> >>> >> ago completely, but it looks like we hadn't :-(
>> >> >>> >> Eddie, do you have any idea?
>> >> >>> >>
>> >> >>> >> Joonwoo
>> >> >>> >>
>> >> >>> >> On Thu, Apr 2, 2009 at 8:45 PM, Tom Gibson
>> >> >>> >> <tom.gibson at ipvidnet.com>
>> >> >>> >> wrote:
>> >> >>> >> > I didn't get around to patching my driver for polling mode
>> >> >>> >> > yet,
>> >> >>> >> > but
>> >> >>> >> > I
>> >> >>> >> > did
>> >> >>> >> > try adding a FromDevice() -> Discard line to my config. Using
>> >> >>> >> > the
>> >> >>> >> > bonding
>> >> >>> >> > ethernet device, it didn't help, the Kernel still locked up.
>> >> >>> >> >
>> >> >>> >> > After rebooting I tried running a seperate UDP traffic
>> >> >>> >> > generator
>> >> >>> >> > for
>> >> >>> >> > each
>> >> >>> >> > individual eth device (all using E1000 driver) also with the
>> >> >>> >> > FromDevice
>> >> >>> >> > line
>> >> >>> >> > included. I was happy to see this worked. Tomorrow when back
>> >> >>> >> > in
>> >> >>> >> > the
>> >> >>> >> > office
>> >> >>> >> > I'll report if removing the FromDevice line causes the Kernel
>> >> >>> >> > to
>> >> >>> >> > crash
>> >> >>> >> > or
>> >> >>> >> > not. Hopefully I'll also get migrated to the patched E1000e
>> >> >>> >> > driver
>> >> >>> >> > to.
>> >> >>> >> >
>> >> >>> >> > -Tom
>> >> >>> >> >
>> >> >>> >> > On Thu, Apr 2, 2009 at 8:45 AM, Joonwoo Park
>> >> >>> >> > <joonwpark81 at gmail.com>
>> >> >>> >> > wrote:
>> >> >>> >> >>
>> >> >>> >> >> On Thu, Apr 2, 2009 at 12:44 AM, Tom Gibson
>> >> >>> >> >> <tom.gibson at ipvidnet.com>
>> >> >>> >> >> wrote:
>> >> >>> >> >> > Ok. Thanks Joonwoo. I guess I read your name wrong
>> >> >>> >> >> > before,
>> >> >>> >> >> > sorry.
>> >> >>> >> >> > :)
>> >> >>> >> >> >
>> >> >>> >> >>
>> >> >>> >> >> Never mind Tom :-)
>> >> >>> >> >>
>> >> >>> >> >> > Does it matter that I haven't applied the polling mode
>> >> >>> >> >> > patch
>> >> >>> >> >> > to
>> >> >>> >> >> > my
>> >> >>> >> >> > E1000
>> >> >>> >> >> > driver? Will PollDevice work correctly regardless? I'm
>> >> >>> >> >> > just
>> >> >>> >> >> > using
>> >> >>> >> >> > the
>> >> >>> >> >> > driver that came with the Kernel, although NAPI is enabled.
>> >> >>> >> >> >
>> >> >>> >> >>
>> >> >>> >> >> Yes it does. To use PollDevice element you should patch your
>> >> >>> >> >> e1000
>> >> >>> >> >> driver.
>> >> >>> >> >> There are bunch of patches for the e1000 driver.
>> >> >>> >> >> You could you patch from click git for older version of e1000
>> >> >>> >> >> driver.
>> >> >>> >> >> Otherwise you can unofficial version of patches.
>> >> >>> >> >> I released both of e1000, e1000e driver on the list.
>> >> >>> >> >>
>> >> >>> >> >> > I hadn't thought about it until now. How does polling mode
>> >> >>> >> >> > work
>> >> >>> >> >> > with
>> >> >>> >> >> > the
>> >> >>> >> >> > bonding ethernet driver? I wonder if that needs a special
>> >> >>> >> >> > polling
>> >> >>> >> >> > mode
>> >> >>> >> >> > patch to run in Click with optimal performance.
>> >> >>> >> >> >
>> >> >>> >> >>
>> >> >>> >> >> Unfortunately you cannot use linux bonding under click
>> >> >>> >> >> polling
>> >> >>> >> >> mode.
>> >> >>> >> >> You should use FromDevice. eg) FromDevice(bond0).
>> >> >>> >> >> Otherwise you may write your own bonding element for click to
>> >> >>> >> >> implement your own bonding system to use PollDevice
>> >> >>> >> >>
>> >> >>> >> >> Joonwoo
>> >> >>> >> >>
>> >> >>> >> >> > -Tom
>> >> >>> >> >> >
>> >> >>> >> >> > On Wed, Apr 1, 2009 at 10:36 PM, Joonwoo Park
>> >> >>> >> >> > <joonwpark81 at gmail.com>
>> >> >>> >> >> > wrote:
>> >> >>> >> >> >>
>> >> >>> >> >> >> The PollDevice might help you to *evade* your problem.
>> >> >>> >> >> >> But it looks like click has a bug which we have to fix.
>> >> >>> >> >> >>
>> >> >>> >> >> >> Generally speaking.
>> >> >>> >> >> >> PollDevice performs much better performance than
>> >> >>> >> >> >> FromDevice.
>> >> >>> >> >> >> And it uses other mechanism compare to FromDevice.
>> >> >>> >> >> >> In your case, as Roman pointed out, if you try to put
>> >> >>> >> >> >> PollDevice,
>> >> >>> >> >> >> even
>> >> >>> >> >> >> if it does nothing except drops packets will change your
>> >> >>> >> >> >> router's
>> >> >>> >> >> >> behavior.
>> >> >>> >> >> >>
>> >> >>> >> >> >> BTW, I'm Joonwoo :-)
>> >> >>> >> >> >>
>> >> >>> >> >> >> On Wed, Apr 1, 2009 at 10:24 PM, Tom Gibson
>> >> >>> >> >> >> <tom.gibson at ipvidnet.com>
>> >> >>> >> >> >> wrote:
>> >> >>> >> >> >> > Ok, I'll give that a try tomorrow when I'm at the
>> >> >>> >> >> >> > office.
>> >> >>> >> >> >> > I
>> >> >>> >> >> >> > really
>> >> >>> >> >> >> > appreciate the help from you and Johnwoo. I never would
>> >> >>> >> >> >> > have
>> >> >>> >> >> >> > thought
>> >> >>> >> >> >> > of
>> >> >>> >> >> >> > having to include PollDevice(). I'll hopefully get
>> >> >>> >> >> >> > around
>> >> >>> >> >> >> > to
>> >> >>> >> >> >> > trying
>> >> >>> >> >> >> > Johnwoo's E1000e driver patch very soon.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > Do you know the reason why PollDevice is required? Does
>> >> >>> >> >> >> > it
>> >> >>> >> >> >> > cause
>> >> >>> >> >> >> > some
>> >> >>> >> >> >> > FIFO
>> >> >>> >> >> >> > / queue to fill up which then causes problems? My setup
>> >> >>> >> >> >> > may
>> >> >>> >> >> >> > have
>> >> >>> >> >> >> > been
>> >> >>> >> >> >> > getting back tons of destination port unreachable
>> >> >>> >> >> >> > packets
>> >> >>> >> >> >> > which I
>> >> >>> >> >> >> > hadn't
>> >> >>> >> >> >> > thought about.
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > -Tom
>> >> >>> >> >> >> >
>> >> >>> >> >> >> > On Wed, Apr 1, 2009 at 7:03 PM, Roman Chertov
>> >> >>> >> >> >> > <rchertov at cs.ucsb.edu>
>> >> >>> >> >> >> > wrote:
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Change your config to use PollDevice. That should
>> >> >>> >> >> >> >> enable
>> >> >>> >> >> >> >> polling
>> >> >>> >> >> >> >> on
>> >> >>> >> >> >> >> the
>> >> >>> >> >> >> >> interface. (You have to do it this way, even if you
>> >> >>> >> >> >> >> don't
>> >> >>> >> >> >> >> care
>> >> >>> >> >> >> >> about
>> >> >>> >> >> >> >> receiving packets)
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> elementclass UDPGen {
>> >> >>> >> >> >> >> $device, $rate, $limit, $size,
>> >> >>> >> >> >> >> $seth, $sip, $sport, $deth, $dip, $dport |
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> srcudp :: FastUDPSource($rate, $limit, $size, $seth,
>> >> >>> >> >> >> >> $sip,
>> >> >>> >> >> >> >> $sport,
>> >> >>> >> >> >> >> $deth,
>> >> >>> >> >> >> >> $dip,
>> >> >>> >> >> >> >> $dport);
>> >> >>> >> >> >> >> srcudp -> td :: ToDevice($device);
>> >> >>> >> >> >> >> PollDevice($device) -> Discard;
>> >> >>> >> >> >> >> }
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Roman
>> >> >>> >> >> >> >>
>> >> >>> >> >> >> >> Tom Gibson wrote:
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> Here's my click config. It's a slightly modified
>> >> >>> >> >> >> >>> version
>> >> >>> >> >> >> >>> of
>> >> >>> >> >> >> >>> the
>> >> >>> >> >> >> >>> UDP
>> >> >>> >> >> >> >>> blaster script.
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> elementclass UDPGen {
>> >> >>> >> >> >> >>> $device, $rate, $limit, $size,
>> >> >>> >> >> >> >>> $seth, $sip, $sport, $deth, $dip, $dport |
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> srcudp :: FastUDPSource($rate, $limit, $size, $seth,
>> >> >>> >> >> >> >>> $sip,
>> >> >>> >> >> >> >>> $sport,
>> >> >>> >> >> >> >>> $deth,
>> >> >>> >> >> >> >>> $dip,
>> >> >>> >> >> >> >>> $dport);
>> >> >>> >> >> >> >>> srcudp -> td :: ToDevice($device);
>> >> >>> >> >> >> >>> }
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> /* using 1362 byte packets
>> >> >>> >> >> >> >>> 1gbps = 91777 pkts/sec
>> >> >>> >> >> >> >>> 2gbps = 183554 pkts/sec
>> >> >>> >> >> >> >>> 3gbps = 275330 pkts/sec
>> >> >>> >> >> >> >>> 4gbps = 367107 pkts/sec
>> >> >>> >> >> >> >>> 5gbps = 458884 pkts/sec
>> >> >>> >> >> >> >>> */
>> >> >>> >> >> >> >>> u :: UDPGen(bond0, 367107, 36710700, 1358,
>> >> >>> >> >> >> >>> 00:1f:c6:6c:d5:ca, 192.168.220.1, 1234,
>> >> >>> >> >> >> >>> 00:1f:c6:23:48:a6, 192.168.220.2, 1234);
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> On Wed, Apr 1, 2009 at 5:01 PM, Joonwoo Park
>> >> >>> >> >> >> >>> <joonwpark81 at gmail.com
>> >> >>> >> >> >> >>> <mailto:joonwpark81 at gmail.com>> wrote:
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> Sounds you are using FromDevice.
>> >> >>> >> >> >> >>> Is it possible to post your click config as well?
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> Joonwoo
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> On Wed, Apr 1, 2009 at 4:57 PM, Tom Gibson
>> >> >>> >> >> >> >>> <tom.gibson at ipvidnet.com
>> >> >>> >> >> >> >>> <mailto:tom.gibson at ipvidnet.com>> wrote:
>> >> >>> >> >> >> >>> > Sorry for the delayed response. I've been out
>> >> >>> >> >> >> >>> of
>> >> >>> >> >> >> >>> the
>> >> >>> >> >> >> >>> office
>> >> >>> >> >> >> >>> a
>> >> >>> >> >> >> >>> lot and when
>> >> >>> >> >> >> >>> > I first got this the PC running Click wasn't on
>> >> >>> >> >> >> >>> the
>> >> >>> >> >> >> >>> Internet.
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > I was / am running the E1000 driver that comes
>> >> >>> >> >> >> >>> in
>> >> >>> >> >> >> >>> the
>> >> >>> >> >> >> >>> 2.6.24-7
>> >> >>> >> >> >> >>> Kernel. The
>> >> >>> >> >> >> >>> > Kernel is the same as on kernel.org
>> >> >>> >> >> >> >>> <http://kernel.org>
>> >> >>> >> >> >> >>> except
>> >> >>> >> >> >> >>> for the click patch was applied.
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > Below is my config I used to build the Kernel:
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Automatically generated make config: don't
>> >> >>> >> >> >> >>> edit
>> >> >>> >> >> >> >>> > # Linux kernel version: 2.6.24.7
>> >> >>> >> >> >> >>> > # Tue Mar 10 17:46:31 2009
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_64BIT=y
>> >> >>> >> >> >> >>> > # CONFIG_X86_32 is not set
>> >> >>> >> >> >> >>> > CONFIG_X86_64=y
>> >> >>> >> >> >> >>> > CONFIG_X86=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_TIME=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_CMOS_UPDATE=y
>> >> >>> >> >> >> >>> > CONFIG_CLOCKSOURCE_WATCHDOG=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
>> >> >>> >> >> >> >>> > CONFIG_LOCKDEP_SUPPORT=y
>> >> >>> >> >> >> >>> > CONFIG_STACKTRACE_SUPPORT=y
>> >> >>> >> >> >> >>> > CONFIG_SEMAPHORE_SLEEPERS=y
>> >> >>> >> >> >> >>> > CONFIG_MMU=y
>> >> >>> >> >> >> >>> > CONFIG_ZONE_DMA=y
>> >> >>> >> >> >> >>> > # CONFIG_QUICKLIST is not set
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_ISA_DMA=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_IOMAP=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_BUG=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_HWEIGHT=y
>> >> >>> >> >> >> >>> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y
>> >> >>> >> >> >> >>> > CONFIG_DMI=y
>> >> >>> >> >> >> >>> > CONFIG_RWSEM_GENERIC_SPINLOCK=y
>> >> >>> >> >> >> >>> > # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
>> >> >>> >> >> >> >>> > # CONFIG_ARCH_HAS_ILOG2_U32 is not set
>> >> >>> >> >> >> >>> > # CONFIG_ARCH_HAS_ILOG2_U64 is not set
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_CALIBRATE_DELAY=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_TIME_VSYSCALL=y
>> >> >>> >> >> >> >>> > CONFIG_ARCH_SUPPORTS_OPROFILE=y
>> >> >>> >> >> >> >>> > CONFIG_ZONE_DMA32=y
>> >> >>> >> >> >> >>> > CONFIG_ARCH_POPULATES_NODE_MAP=y
>> >> >>> >> >> >> >>> > CONFIG_AUDIT_ARCH=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_HARDIRQS=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_IRQ_PROBE=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_PENDING_IRQ=y
>> >> >>> >> >> >> >>> > CONFIG_X86_HT=y
>> >> >>> >> >> >> >>> > # CONFIG_KTIME_SCALAR is not set
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>>
>> >> >>> >> >> >> >>> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # General setup
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_EXPERIMENTAL=y
>> >> >>> >> >> >> >>> > CONFIG_LOCK_KERNEL=y
>> >> >>> >> >> >> >>> > CONFIG_INIT_ENV_ARG_LIMIT=32
>> >> >>> >> >> >> >>> > CONFIG_LOCALVERSION=""
>> >> >>> >> >> >> >>> > # CONFIG_LOCALVERSION_AUTO is not set
>> >> >>> >> >> >> >>> > CONFIG_SWAP=y
>> >> >>> >> >> >> >>> > CONFIG_SYSVIPC=y
>> >> >>> >> >> >> >>> > CONFIG_SYSVIPC_SYSCTL=y
>> >> >>> >> >> >> >>> > CONFIG_POSIX_MQUEUE=y
>> >> >>> >> >> >> >>> > CONFIG_BSD_PROCESS_ACCT=y
>> >> >>> >> >> >> >>> > CONFIG_BSD_PROCESS_ACCT_V3=y
>> >> >>> >> >> >> >>> > CONFIG_TASKSTATS=y
>> >> >>> >> >> >> >>> > CONFIG_TASK_DELAY_ACCT=y
>> >> >>> >> >> >> >>> > CONFIG_TASK_XACCT=y
>> >> >>> >> >> >> >>> > CONFIG_TASK_IO_ACCOUNTING=y
>> >> >>> >> >> >> >>> > CONFIG_USER_NS=y
>> >> >>> >> >> >> >>> > CONFIG_PID_NS=y
>> >> >>> >> >> >> >>> > CONFIG_AUDIT=y
>> >> >>> >> >> >> >>> > CONFIG_AUDITSYSCALL=y
>> >> >>> >> >> >> >>> > CONFIG_AUDIT_TREE=y
>> >> >>> >> >> >> >>> > # CONFIG_IKCONFIG is not set
>> >> >>> >> >> >> >>> > CONFIG_LOG_BUF_SHIFT=17
>> >> >>> >> >> >> >>> > CONFIG_CGROUPS=y
>> >> >>> >> >> >> >>> > # CONFIG_CGROUP_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_CGROUP_NS=y
>> >> >>> >> >> >> >>> > CONFIG_CPUSETS=y
>> >> >>> >> >> >> >>> > CONFIG_FAIR_GROUP_SCHED=y
>> >> >>> >> >> >> >>> > CONFIG_FAIR_USER_SCHED=y
>> >> >>> >> >> >> >>> > # CONFIG_FAIR_CGROUP_SCHED is not set
>> >> >>> >> >> >> >>> > CONFIG_CGROUP_CPUACCT=y
>> >> >>> >> >> >> >>> > CONFIG_SYSFS_DEPRECATED=y
>> >> >>> >> >> >> >>> > CONFIG_PROC_PID_CPUSET=y
>> >> >>> >> >> >> >>> > CONFIG_RELAY=y
>> >> >>> >> >> >> >>> > CONFIG_BLK_DEV_INITRD=y
>> >> >>> >> >> >> >>> > CONFIG_INITRAMFS_SOURCE=""
>> >> >>> >> >> >> >>> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y
>> >> >>> >> >> >> >>> > CONFIG_SYSCTL=y
>> >> >>> >> >> >> >>> > # CONFIG_EMBEDDED is not set
>> >> >>> >> >> >> >>> > CONFIG_UID16=y
>> >> >>> >> >> >> >>> > CONFIG_SYSCTL_SYSCALL=y
>> >> >>> >> >> >> >>> > CONFIG_KALLSYMS=y
>> >> >>> >> >> >> >>> > # CONFIG_KALLSYMS_ALL is not set
>> >> >>> >> >> >> >>> > # CONFIG_KALLSYMS_EXTRA_PASS is not set
>> >> >>> >> >> >> >>> > CONFIG_HOTPLUG=y
>> >> >>> >> >> >> >>> > CONFIG_PRINTK=y
>> >> >>> >> >> >> >>> > CONFIG_BUG=y
>> >> >>> >> >> >> >>> > CONFIG_ELF_CORE=y
>> >> >>> >> >> >> >>> > CONFIG_BASE_FULL=y
>> >> >>> >> >> >> >>> > CONFIG_FUTEX=y
>> >> >>> >> >> >> >>> > CONFIG_ANON_INODES=y
>> >> >>> >> >> >> >>> > CONFIG_EPOLL=y
>> >> >>> >> >> >> >>> > CONFIG_SIGNALFD=y
>> >> >>> >> >> >> >>> > CONFIG_EVENTFD=y
>> >> >>> >> >> >> >>> > CONFIG_SHMEM=y
>> >> >>> >> >> >> >>> > CONFIG_VM_EVENT_COUNTERS=y
>> >> >>> >> >> >> >>> > CONFIG_SLAB=y
>> >> >>> >> >> >> >>> > # CONFIG_SLUB is not set
>> >> >>> >> >> >> >>> > # CONFIG_SLOB is not set
>> >> >>> >> >> >> >>> > CONFIG_SLABINFO=y
>> >> >>> >> >> >> >>> > CONFIG_RT_MUTEXES=y
>> >> >>> >> >> >> >>> > # CONFIG_TINY_SHMEM is not set
>> >> >>> >> >> >> >>> > CONFIG_BASE_SMALL=0
>> >> >>> >> >> >> >>> > CONFIG_MODULES=y
>> >> >>> >> >> >> >>> > CONFIG_MODULE_UNLOAD=y
>> >> >>> >> >> >> >>> > CONFIG_MODULE_FORCE_UNLOAD=y
>> >> >>> >> >> >> >>> > CONFIG_MODVERSIONS=y
>> >> >>> >> >> >> >>> > # CONFIG_MODULE_SRCVERSION_ALL is not set
>> >> >>> >> >> >> >>> > CONFIG_KMOD=y
>> >> >>> >> >> >> >>> > CONFIG_STOP_MACHINE=y
>> >> >>> >> >> >> >>> > CONFIG_BLOCK=y
>> >> >>> >> >> >> >>> > CONFIG_BLK_DEV_IO_TRACE=y
>> >> >>> >> >> >> >>> > CONFIG_BLK_DEV_BSG=y
>> >> >>> >> >> >> >>> > CONFIG_BLOCK_COMPAT=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # IO Schedulers
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IOSCHED_NOOP=y
>> >> >>> >> >> >> >>> > CONFIG_IOSCHED_AS=y
>> >> >>> >> >> >> >>> > CONFIG_IOSCHED_DEADLINE=y
>> >> >>> >> >> >> >>> > CONFIG_IOSCHED_CFQ=y
>> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_AS is not set
>> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_DEADLINE is not set
>> >> >>> >> >> >> >>> > CONFIG_DEFAULT_CFQ=y
>> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_NOOP is not set
>> >> >>> >> >> >> >>> > CONFIG_DEFAULT_IOSCHED="cfq"
>> >> >>> >> >> >> >>> > CONFIG_PREEMPT_NOTIFIERS=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Processor type and features
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_TICK_ONESHOT=y
>> >> >>> >> >> >> >>> > CONFIG_NO_HZ=y
>> >> >>> >> >> >> >>> > CONFIG_HIGH_RES_TIMERS=y
>> >> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
>> >> >>> >> >> >> >>> > CONFIG_SMP=y
>> >> >>> >> >> >> >>> > CONFIG_X86_PC=y
>> >> >>> >> >> >> >>> > # CONFIG_X86_ELAN is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_VOYAGER is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_NUMAQ is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_SUMMIT is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_BIGSMP is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_VISWS is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_GENERICARCH is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_ES7000 is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_VSMP is not set
>> >> >>> >> >> >> >>> > # CONFIG_M386 is not set
>> >> >>> >> >> >> >>> > # CONFIG_M486 is not set
>> >> >>> >> >> >> >>> > # CONFIG_M586 is not set
>> >> >>> >> >> >> >>> > # CONFIG_M586TSC is not set
>> >> >>> >> >> >> >>> > # CONFIG_M586MMX is not set
>> >> >>> >> >> >> >>> > # CONFIG_M686 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MPENTIUMII is not set
>> >> >>> >> >> >> >>> > # CONFIG_MPENTIUMIII is not set
>> >> >>> >> >> >> >>> > # CONFIG_MPENTIUMM is not set
>> >> >>> >> >> >> >>> > # CONFIG_MPENTIUM4 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MK6 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MK7 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MK8 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MCRUSOE is not set
>> >> >>> >> >> >> >>> > # CONFIG_MEFFICEON is not set
>> >> >>> >> >> >> >>> > # CONFIG_MWINCHIPC6 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MWINCHIP2 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MWINCHIP3D is not set
>> >> >>> >> >> >> >>> > # CONFIG_MGEODEGX1 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MGEODE_LX is not set
>> >> >>> >> >> >> >>> > # CONFIG_MCYRIXIII is not set
>> >> >>> >> >> >> >>> > # CONFIG_MVIAC3_2 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MVIAC7 is not set
>> >> >>> >> >> >> >>> > # CONFIG_MPSC is not set
>> >> >>> >> >> >> >>> > CONFIG_MCORE2=y
>> >> >>> >> >> >> >>> > # CONFIG_GENERIC_CPU is not set
>> >> >>> >> >> >> >>> > CONFIG_X86_L1_CACHE_BYTES=64
>> >> >>> >> >> >> >>> > CONFIG_X86_INTERNODE_CACHE_BYTES=64
>> >> >>> >> >> >> >>> > CONFIG_X86_CMPXCHG=y
>> >> >>> >> >> >> >>> > CONFIG_X86_L1_CACHE_SHIFT=6
>> >> >>> >> >> >> >>> > CONFIG_X86_GOOD_APIC=y
>> >> >>> >> >> >> >>> > CONFIG_X86_INTEL_USERCOPY=y
>> >> >>> >> >> >> >>> > CONFIG_X86_USE_PPRO_CHECKSUM=y
>> >> >>> >> >> >> >>> > CONFIG_X86_TSC=y
>> >> >>> >> >> >> >>> > CONFIG_X86_MINIMUM_CPU_FAMILY=64
>> >> >>> >> >> >> >>> > CONFIG_HPET_TIMER=y
>> >> >>> >> >> >> >>> > CONFIG_GART_IOMMU=y
>> >> >>> >> >> >> >>> > CONFIG_CALGARY_IOMMU=y
>> >> >>> >> >> >> >>> > CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
>> >> >>> >> >> >> >>> > CONFIG_SWIOTLB=y
>> >> >>> >> >> >> >>> > CONFIG_NR_CPUS=32
>> >> >>> >> >> >> >>> > CONFIG_SCHED_SMT=y
>> >> >>> >> >> >> >>> > CONFIG_SCHED_MC=y
>> >> >>> >> >> >> >>> > CONFIG_PREEMPT_NONE=y
>> >> >>> >> >> >> >>> > # CONFIG_PREEMPT_VOLUNTARY is not set
>> >> >>> >> >> >> >>> > # CONFIG_PREEMPT is not set
>> >> >>> >> >> >> >>> > # CONFIG_PREEMPT_BKL is not set
>> >> >>> >> >> >> >>> > CONFIG_X86_LOCAL_APIC=y
>> >> >>> >> >> >> >>> > CONFIG_X86_IO_APIC=y
>> >> >>> >> >> >> >>> > CONFIG_X86_MCE=y
>> >> >>> >> >> >> >>> > CONFIG_X86_MCE_INTEL=y
>> >> >>> >> >> >> >>> > CONFIG_X86_MCE_AMD=y
>> >> >>> >> >> >> >>> > CONFIG_MICROCODE=m
>> >> >>> >> >> >> >>> > CONFIG_MICROCODE_OLD_INTERFACE=y
>> >> >>> >> >> >> >>> > CONFIG_X86_MSR=m
>> >> >>> >> >> >> >>> > CONFIG_X86_CPUID=m
>> >> >>> >> >> >> >>> > CONFIG_NUMA=y
>> >> >>> >> >> >> >>> > CONFIG_K8_NUMA=y
>> >> >>> >> >> >> >>> > CONFIG_X86_64_ACPI_NUMA=y
>> >> >>> >> >> >> >>> > # CONFIG_NUMA_EMU is not set
>> >> >>> >> >> >> >>> > CONFIG_NODES_SHIFT=6
>> >> >>> >> >> >> >>> > CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
>> >> >>> >> >> >> >>> > CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
>> >> >>> >> >> >> >>> > CONFIG_ARCH_SPARSEMEM_ENABLE=y
>> >> >>> >> >> >> >>> > CONFIG_SELECT_MEMORY_MODEL=y
>> >> >>> >> >> >> >>> > # CONFIG_FLATMEM_MANUAL is not set
>> >> >>> >> >> >> >>> > # CONFIG_DISCONTIGMEM_MANUAL is not set
>> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM_MANUAL=y
>> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM=y
>> >> >>> >> >> >> >>> > CONFIG_NEED_MULTIPLE_NODES=y
>> >> >>> >> >> >> >>> > CONFIG_HAVE_MEMORY_PRESENT=y
>> >> >>> >> >> >> >>> > # CONFIG_SPARSEMEM_STATIC is not set
>> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM_EXTREME=y
>> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
>> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM_VMEMMAP=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Memory hotplug is currently incompatible with
>> >> >>> >> >> >> >>> Software
>> >> >>> >> >> >> >>> Suspend
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_SPLIT_PTLOCK_CPUS=4
>> >> >>> >> >> >> >>> > CONFIG_MIGRATION=y
>> >> >>> >> >> >> >>> > CONFIG_RESOURCES_64BIT=y
>> >> >>> >> >> >> >>> > CONFIG_ZONE_DMA_FLAG=1
>> >> >>> >> >> >> >>> > CONFIG_BOUNCE=y
>> >> >>> >> >> >> >>> > CONFIG_VIRT_TO_BUS=y
>> >> >>> >> >> >> >>> > CONFIG_MTRR=y
>> >> >>> >> >> >> >>> > CONFIG_SECCOMP=y
>> >> >>> >> >> >> >>> > # CONFIG_CC_STACKPROTECTOR is not set
>> >> >>> >> >> >> >>> > # CONFIG_HZ_100 is not set
>> >> >>> >> >> >> >>> > CONFIG_HZ_250=y
>> >> >>> >> >> >> >>> > # CONFIG_HZ_300 is not set
>> >> >>> >> >> >> >>> > # CONFIG_HZ_1000 is not set
>> >> >>> >> >> >> >>> > CONFIG_HZ=250
>> >> >>> >> >> >> >>> > CONFIG_KEXEC=y
>> >> >>> >> >> >> >>> > # CONFIG_CRASH_DUMP is not set
>> >> >>> >> >> >> >>> > CONFIG_PHYSICAL_START=0x200000
>> >> >>> >> >> >> >>> > # CONFIG_RELOCATABLE is not set
>> >> >>> >> >> >> >>> > CONFIG_PHYSICAL_ALIGN=0x200000
>> >> >>> >> >> >> >>> > CONFIG_HOTPLUG_CPU=y
>> >> >>> >> >> >> >>> > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
>> >> >>> >> >> >> >>> > CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Power management options
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_ARCH_HIBERNATION_HEADER=y
>> >> >>> >> >> >> >>> > CONFIG_PM=y
>> >> >>> >> >> >> >>> > # CONFIG_PM_LEGACY is not set
>> >> >>> >> >> >> >>> > # CONFIG_PM_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_PM_SLEEP_SMP=y
>> >> >>> >> >> >> >>> > CONFIG_PM_SLEEP=y
>> >> >>> >> >> >> >>> > CONFIG_SUSPEND_SMP_POSSIBLE=y
>> >> >>> >> >> >> >>> > CONFIG_SUSPEND=y
>> >> >>> >> >> >> >>> > CONFIG_HIBERNATION_SMP_POSSIBLE=y
>> >> >>> >> >> >> >>> > CONFIG_HIBERNATION=y
>> >> >>> >> >> >> >>> > CONFIG_PM_STD_PARTITION=""
>> >> >>> >> >> >> >>> > CONFIG_ACPI=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_SLEEP=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_PROCFS=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_PROCFS_POWER=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_SYSFS_POWER=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_PROC_EVENT=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_AC=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_BATTERY=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_BUTTON=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_VIDEO=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_FAN=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_DOCK=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_BAY=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_PROCESSOR=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_HOTPLUG_CPU=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_THERMAL=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_NUMA=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_ASUS=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_TOSHIBA=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_BLACKLIST_YEAR=0
>> >> >>> >> >> >> >>> > # CONFIG_ACPI_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_ACPI_EC=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_POWER=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_SYSTEM=y
>> >> >>> >> >> >> >>> > CONFIG_X86_PM_TIMER=y
>> >> >>> >> >> >> >>> > CONFIG_ACPI_CONTAINER=m
>> >> >>> >> >> >> >>> > CONFIG_ACPI_SBS=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # CPU Frequency scaling
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ=y
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_TABLE=m
>> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_STAT=m
>> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_STAT_DETAILS is not set
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
>> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not
>> >> >>> >> >> >> >>> set
>> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not
>> >> >>> >> >> >> >>> set
>> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is
>> >> >>> >> >> >> >>> not
>> >> >>> >> >> >> >>> set
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_POWERSAVE=m
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_USERSPACE=m
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_ONDEMAND=m
>> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # CPUFreq processor drivers
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_X86_ACPI_CPUFREQ=m
>> >> >>> >> >> >> >>> > CONFIG_X86_POWERNOW_K8=m
>> >> >>> >> >> >> >>> > CONFIG_X86_POWERNOW_K8_ACPI=y
>> >> >>> >> >> >> >>> > CONFIG_X86_SPEEDSTEP_CENTRINO=m
>> >> >>> >> >> >> >>> > # CONFIG_X86_P4_CLOCKMOD is not set
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # shared options
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
>> >> >>> >> >> >> >>> > # CONFIG_X86_SPEEDSTEP_LIB is not set
>> >> >>> >> >> >> >>> > CONFIG_CPU_IDLE=y
>> >> >>> >> >> >> >>> > CONFIG_CPU_IDLE_GOV_LADDER=y
>> >> >>> >> >> >> >>> > CONFIG_CPU_IDLE_GOV_MENU=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Bus options (PCI etc.)
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_PCI=y
>> >> >>> >> >> >> >>> > CONFIG_PCI_DIRECT=y
>> >> >>> >> >> >> >>> > CONFIG_PCI_MMCONFIG=y
>> >> >>> >> >> >> >>> > CONFIG_PCI_DOMAINS=y
>> >> >>> >> >> >> >>> > # CONFIG_DMAR is not set
>> >> >>> >> >> >> >>> > CONFIG_PCIEPORTBUS=y
>> >> >>> >> >> >> >>> > CONFIG_PCIEAER=y
>> >> >>> >> >> >> >>> > CONFIG_ARCH_SUPPORTS_MSI=y
>> >> >>> >> >> >> >>> > CONFIG_PCI_MSI=y
>> >> >>> >> >> >> >>> > CONFIG_PCI_LEGACY=y
>> >> >>> >> >> >> >>> > # CONFIG_PCI_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_HT_IRQ=y
>> >> >>> >> >> >> >>> > CONFIG_ISA_DMA_API=y
>> >> >>> >> >> >> >>> > CONFIG_K8_NB=y
>> >> >>> >> >> >> >>> > # CONFIG_PCCARD is not set
>> >> >>> >> >> >> >>> > # CONFIG_HOTPLUG_PCI is not set
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Executable file formats / Emulations
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_BINFMT_ELF=y
>> >> >>> >> >> >> >>> > CONFIG_BINFMT_MISC=m
>> >> >>> >> >> >> >>> > CONFIG_IA32_EMULATION=y
>> >> >>> >> >> >> >>> > CONFIG_IA32_AOUT=y
>> >> >>> >> >> >> >>> > CONFIG_COMPAT=y
>> >> >>> >> >> >> >>> > CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
>> >> >>> >> >> >> >>> > CONFIG_SYSVIPC_COMPAT=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Networking
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_NET=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Networking options
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_PACKET=y
>> >> >>> >> >> >> >>> > CONFIG_PACKET_MMAP=y
>> >> >>> >> >> >> >>> > CONFIG_UNIX=y
>> >> >>> >> >> >> >>> > CONFIG_XFRM=y
>> >> >>> >> >> >> >>> > CONFIG_XFRM_USER=m
>> >> >>> >> >> >> >>> > # CONFIG_XFRM_SUB_POLICY is not set
>> >> >>> >> >> >> >>> > # CONFIG_XFRM_MIGRATE is not set
>> >> >>> >> >> >> >>> > CONFIG_NET_KEY=m
>> >> >>> >> >> >> >>> > # CONFIG_NET_KEY_MIGRATE is not set
>> >> >>> >> >> >> >>> > CONFIG_INET=y
>> >> >>> >> >> >> >>> > CONFIG_IP_MULTICAST=y
>> >> >>> >> >> >> >>> > CONFIG_IP_ADVANCED_ROUTER=y
>> >> >>> >> >> >> >>> > CONFIG_ASK_IP_FIB_HASH=y
>> >> >>> >> >> >> >>> > # CONFIG_IP_FIB_TRIE is not set
>> >> >>> >> >> >> >>> > CONFIG_IP_FIB_HASH=y
>> >> >>> >> >> >> >>> > CONFIG_IP_MULTIPLE_TABLES=y
>> >> >>> >> >> >> >>> > CONFIG_IP_ROUTE_MULTIPATH=y
>> >> >>> >> >> >> >>> > CONFIG_IP_ROUTE_VERBOSE=y
>> >> >>> >> >> >> >>> > # CONFIG_IP_PNP is not set
>> >> >>> >> >> >> >>> > CONFIG_NET_IPIP=m
>> >> >>> >> >> >> >>> > CONFIG_NET_IPGRE=m
>> >> >>> >> >> >> >>> > CONFIG_NET_IPGRE_BROADCAST=y
>> >> >>> >> >> >> >>> > CONFIG_IP_MROUTE=y
>> >> >>> >> >> >> >>> > CONFIG_IP_PIMSM_V1=y
>> >> >>> >> >> >> >>> > CONFIG_IP_PIMSM_V2=y
>> >> >>> >> >> >> >>> > # CONFIG_ARPD is not set
>> >> >>> >> >> >> >>> > CONFIG_SYN_COOKIES=y
>> >> >>> >> >> >> >>> > CONFIG_INET_AH=m
>> >> >>> >> >> >> >>> > CONFIG_INET_ESP=m
>> >> >>> >> >> >> >>> > CONFIG_INET_IPCOMP=m
>> >> >>> >> >> >> >>> > CONFIG_INET_XFRM_TUNNEL=m
>> >> >>> >> >> >> >>> > CONFIG_INET_TUNNEL=m
>> >> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_TRANSPORT=m
>> >> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_TUNNEL=m
>> >> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_BEET=m
>> >> >>> >> >> >> >>> > CONFIG_INET_LRO=m
>> >> >>> >> >> >> >>> > CONFIG_INET_DIAG=m
>> >> >>> >> >> >> >>> > CONFIG_INET_TCP_DIAG=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_ADVANCED=y
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_BIC=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_CUBIC=y
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_WESTWOOD=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_HTCP=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_HSTCP=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_HYBLA=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_VEGAS=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_SCALABLE=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_LP=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_VENO=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_YEAH=m
>> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_ILLINOIS=m
>> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_BIC is not set
>> >> >>> >> >> >> >>> > CONFIG_DEFAULT_CUBIC=y
>> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_HTCP is not set
>> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_VEGAS is not set
>> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_WESTWOOD is not set
>> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_RENO is not set
>> >> >>> >> >> >> >>> > CONFIG_DEFAULT_TCP_CONG="cubic"
>> >> >>> >> >> >> >>> > CONFIG_TCP_MD5SIG=y
>> >> >>> >> >> >> >>> > CONFIG_IP_VS=m
>> >> >>> >> >> >> >>> > # CONFIG_IP_VS_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_TAB_BITS=12
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # IPVS transport protocol load balancing support
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_TCP=y
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_UDP=y
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_ESP=y
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_AH=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # IPVS scheduler
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_RR=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_WRR=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_LC=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_WLC=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_LBLC=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_LBLCR=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_DH=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_SH=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_SED=m
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_NQ=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # IPVS application helper
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IP_VS_FTP=m
>> >> >>> >> >> >> >>> > CONFIG_IPV6=m
>> >> >>> >> >> >> >>> > CONFIG_IPV6_PRIVACY=y
>> >> >>> >> >> >> >>> > CONFIG_IPV6_ROUTER_PREF=y
>> >> >>> >> >> >> >>> > CONFIG_IPV6_ROUTE_INFO=y
>> >> >>> >> >> >> >>> > CONFIG_IPV6_OPTIMISTIC_DAD=y
>> >> >>> >> >> >> >>> > CONFIG_INET6_AH=m
>> >> >>> >> >> >> >>> > CONFIG_INET6_ESP=m
>> >> >>> >> >> >> >>> > CONFIG_INET6_IPCOMP=m
>> >> >>> >> >> >> >>> > CONFIG_IPV6_MIP6=m
>> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_TUNNEL=m
>> >> >>> >> >> >> >>> > CONFIG_INET6_TUNNEL=m
>> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_TRANSPORT=m
>> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_TUNNEL=m
>> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_BEET=m
>> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
>> >> >>> >> >> >> >>> > CONFIG_IPV6_SIT=m
>> >> >>> >> >> >> >>> > CONFIG_IPV6_TUNNEL=m
>> >> >>> >> >> >> >>> > CONFIG_IPV6_MULTIPLE_TABLES=y
>> >> >>> >> >> >> >>> > CONFIG_IPV6_SUBTREES=y
>> >> >>> >> >> >> >>> > # CONFIG_NETLABEL is not set
>> >> >>> >> >> >> >>> > CONFIG_NETWORK_SECMARK=y
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER=y
>> >> >>> >> >> >> >>> > # CONFIG_NETFILTER_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_NETFILTER=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Core Netfilter Configuration
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK_QUEUE=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK_LOG=m
>> >> >>> >> >> >> >>> > # CONFIG_NF_CONNTRACK_ENABLED is not set
>> >> >>> >> >> >> >>> > # CONFIG_NF_CONNTRACK is not set
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XTABLES=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_DSCP=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_MARK=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_NFLOG=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_TRACE=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_SECMARK=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_COMMENT=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_DCCP=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_DSCP=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_ESP=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_LENGTH=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_LIMIT=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MAC=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MARK=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_POLICY=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_QUOTA=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_REALM=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_SCTP=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_STRING=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_TIME=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_U32=m
>> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # IP: Netfilter Configuration
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_QUEUE=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_IPTABLES=m
>> >> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_IPRANGE is not set
>> >> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_TOS is not set
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_RECENT=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_ECN=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_AH=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_TTL=m
>> >> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_OWNER is not set
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_ADDRTYPE=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_FILTER=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_REJECT=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_LOG=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_ULOG=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_MANGLE=m
>> >> >>> >> >> >> >>> > # CONFIG_IP_NF_TARGET_TOS is not set
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_ECN=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_TTL=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_RAW=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_ARPTABLES=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_ARPFILTER=m
>> >> >>> >> >> >> >>> > CONFIG_IP_NF_ARP_MANGLE=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # IPv6: Netfilter Configuration (EXPERIMENTAL)
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_QUEUE=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_IPTABLES=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_RT=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_OPTS=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_FRAG=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_HL=m
>> >> >>> >> >> >> >>> > # CONFIG_IP6_NF_MATCH_OWNER is not set
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_IPV6HEADER=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_AH=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_MH=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_EUI64=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_FILTER=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_LOG=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_REJECT=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MANGLE=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_HL=m
>> >> >>> >> >> >> >>> > CONFIG_IP6_NF_RAW=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Bridge: Netfilter Configuration
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_NF_EBTABLES=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_BROUTE=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_T_FILTER=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_T_NAT=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_802_3=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_AMONG=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ARP=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_IP=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_LIMIT=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_MARK=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_PKTTYPE=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_STP=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_VLAN=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ARPREPLY=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_DNAT=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_MARK_T=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_REDIRECT=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_SNAT=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_LOG=m
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ULOG=m
>> >> >>> >> >> >> >>> > CONFIG_IP_DCCP=m
>> >> >>> >> >> >> >>> > CONFIG_INET_DCCP_DIAG=m
>> >> >>> >> >> >> >>> > CONFIG_IP_DCCP_ACKVEC=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # DCCP CCIDs Configuration (EXPERIMENTAL)
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IP_DCCP_CCID2=m
>> >> >>> >> >> >> >>> > # CONFIG_IP_DCCP_CCID2_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_IP_DCCP_CCID3=m
>> >> >>> >> >> >> >>> > CONFIG_IP_DCCP_TFRC_LIB=m
>> >> >>> >> >> >> >>> > # CONFIG_IP_DCCP_CCID3_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_IP_DCCP_CCID3_RTO=100
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # DCCP Kernel Hacking
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # CONFIG_IP_DCCP_DEBUG is not set
>> >> >>> >> >> >> >>> > CONFIG_IP_SCTP=m
>> >> >>> >> >> >> >>> > # CONFIG_SCTP_DBG_MSG is not set
>> >> >>> >> >> >> >>> > # CONFIG_SCTP_DBG_OBJCNT is not set
>> >> >>> >> >> >> >>> > # CONFIG_SCTP_HMAC_NONE is not set
>> >> >>> >> >> >> >>> > # CONFIG_SCTP_HMAC_SHA1 is not set
>> >> >>> >> >> >> >>> > CONFIG_SCTP_HMAC_MD5=y
>> >> >>> >> >> >> >>> > CONFIG_TIPC=m
>> >> >>> >> >> >> >>> > CONFIG_TIPC_ADVANCED=y
>> >> >>> >> >> >> >>> > CONFIG_TIPC_ZONES=3
>> >> >>> >> >> >> >>> > CONFIG_TIPC_CLUSTERS=1
>> >> >>> >> >> >> >>> > CONFIG_TIPC_NODES=255
>> >> >>> >> >> >> >>> > CONFIG_TIPC_SLAVE_NODES=0
>> >> >>> >> >> >> >>> > CONFIG_TIPC_PORTS=8191
>> >> >>> >> >> >> >>> > CONFIG_TIPC_LOG=0
>> >> >>> >> >> >> >>> > # CONFIG_TIPC_DEBUG is not set
>> >> >>> >> >> >> >>> > # CONFIG_ATM is not set
>> >> >>> >> >> >> >>> > CONFIG_BRIDGE=m
>> >> >>> >> >> >> >>> > CONFIG_VLAN_8021Q=m
>> >> >>> >> >> >> >>> > # CONFIG_DECNET is not set
>> >> >>> >> >> >> >>> > CONFIG_LLC=m
>> >> >>> >> >> >> >>> > CONFIG_LLC2=m
>> >> >>> >> >> >> >>> > # CONFIG_IPX is not set
>> >> >>> >> >> >> >>> > # CONFIG_ATALK is not set
>> >> >>> >> >> >> >>> > CONFIG_X25=m
>> >> >>> >> >> >> >>> > CONFIG_LAPB=m
>> >> >>> >> >> >> >>> > CONFIG_ECONET=m
>> >> >>> >> >> >> >>> > CONFIG_ECONET_AUNUDP=y
>> >> >>> >> >> >> >>> > CONFIG_ECONET_NATIVE=y
>> >> >>> >> >> >> >>> > CONFIG_WAN_ROUTER=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCHED=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Queueing/Scheduling
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_CBQ=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_HTB=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_HFSC=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_PRIO=m
>> >> >>> >> >> >> >>> > # CONFIG_NET_SCH_RR is not set
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_RED=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_SFQ=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_TEQL=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_TBF=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_GRED=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_DSMARK=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_NETEM=m
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_INGRESS=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Classification
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS=y
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_BASIC=m
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_TCINDEX=m
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_ROUTE4=m
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_ROUTE=y
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_FW=m
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_U32=m
>> >> >>> >> >> >> >>> > CONFIG_CLS_U32_PERF=y
>> >> >>> >> >> >> >>> > CONFIG_CLS_U32_MARK=y
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_RSVP=m
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_RSVP6=m
>> >> >>> >> >> >> >>> > CONFIG_NET_EMATCH=y
>> >> >>> >> >> >> >>> > CONFIG_NET_EMATCH_STACK=32
>> >> >>> >> >> >> >>> > CONFIG_NET_EMATCH_CMP=m
>> >> >>> >> >> >> >>> > CONFIG_NET_EMATCH_NBYTE=m
>> >> >>> >> >> >> >>> > CONFIG_NET_EMATCH_U32=m
>> >> >>> >> >> >> >>> > CONFIG_NET_EMATCH_META=m
>> >> >>> >> >> >> >>> > CONFIG_NET_EMATCH_TEXT=m
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_ACT=y
>> >> >>> >> >> >> >>> > CONFIG_NET_ACT_POLICE=m
>> >> >>> >> >> >> >>> > CONFIG_NET_ACT_GACT=m
>> >> >>> >> >> >> >>> > CONFIG_GACT_PROB=y
>> >> >>> >> >> >> >>> > CONFIG_NET_ACT_MIRRED=m
>> >> >>> >> >> >> >>> > CONFIG_NET_ACT_IPT=m
>> >> >>> >> >> >> >>> > CONFIG_NET_ACT_NAT=m
>> >> >>> >> >> >> >>> > CONFIG_NET_ACT_PEDIT=m
>> >> >>> >> >> >> >>> > CONFIG_NET_ACT_SIMP=m
>> >> >>> >> >> >> >>> > # CONFIG_NET_CLS_POLICE is not set
>> >> >>> >> >> >> >>> > CONFIG_NET_CLS_IND=y
>> >> >>> >> >> >> >>> > CONFIG_NET_SCH_FIFO=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Network testing
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_NET_PKTGEN=m
>> >> >>> >> >> >> >>> > CONFIG_HAMRADIO=y
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Packet Radio protocols
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_AX25=m
>> >> >>> >> >> >> >>> > # CONFIG_AX25_DAMA_SLAVE is not set
>> >> >>> >> >> >> >>> > CONFIG_NETROM=m
>> >> >>> >> >> >> >>> > CONFIG_ROSE=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # AX.25 network device drivers
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_MKISS=m
>> >> >>> >> >> >> >>> > CONFIG_6PACK=m
>> >> >>> >> >> >> >>> > CONFIG_BPQETHER=m
>> >> >>> >> >> >> >>> > CONFIG_BAYCOM_SER_FDX=m
>> >> >>> >> >> >> >>> > CONFIG_BAYCOM_SER_HDX=m
>> >> >>> >> >> >> >>> > # CONFIG_YAM is not set
>> >> >>> >> >> >> >>> > CONFIG_IRDA=m
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # IrDA protocols
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IRLAN=m
>> >> >>> >> >> >> >>> > CONFIG_IRNET=m
>> >> >>> >> >> >> >>> > CONFIG_IRCOMM=m
>> >> >>> >> >> >> >>> > # CONFIG_IRDA_ULTRA is not set
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # IrDA options
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > CONFIG_IRDA_CACHE_LAST_LSAP=y
>> >> >>> >> >> >> >>> > CONFIG_IRDA_FAST_RR=y
>> >> >>> >> >> >> >>> > # CONFIG_IRDA_DEBUG is not set
>> >> >>> >> >> >> >>> >
>> >> >>> >> >> >> >>> > #
>> >> >>> >> >> >> >>> > # Infrared-port device drivers
>> >> >>> >> >> >> >>>
More information about the click
mailing list