[Click] Error in Intel Pro Ethernet modules

Indian Mogul indian_mogul at yahoo.com
Sat Mar 5 09:46:40 EST 2005


Thanks Beyers for the pointer.

Cheers!!!
-IM

--- Beyers Cronje <bcronje at gmail.com> wrote:

> Hi IM,
> 
> You are not using the polling driver. Look under
> <clickdir>/drivers/
> and compile the e1000 polling enabled driver. Just
> had a quick look,
> the 82540EM is a supported controller.
> 
> Regards
> 
> Beyers
> 
> 
> On Fri, 4 Mar 2005 09:08:41 -0800 (PST), Indian
> Mogul
> <indian_mogul at yahoo.com> wrote:
> > Thanks Beyers. The driver version for e1000 is
> 5.2.30.
> > The device id is 0x100e which is present in the
> > e1000_pci_tbl[] (e1000_main.c). The controller is
> > 82540EM Gbit Ethernet controller, which I checked
> to
> > be supported by this version of the e1000 driver
> > (5.2.30) (e1000_main.c).
> > 
> > I just want to know what are the files that needs
> to
> > be touched in click to get this working? I want it
> to
> > do it myself and upload the patch. Any pointers to
> the
> > above will be welcome. I am also doing a google
> search
> > on the click website.
> > 
> > Regards,
> > IM
> > 
> > 
> > --- Beyers Cronje <bcronje at gmail.com> wrote:
> > 
> > > Hi Indian,
> > >
> > > You're probable using an unsupported e1000 card
> for
> > > this driver. Check
> > > the device ID and Controller version using
> scanpci
> > > and have a look in
> > > e1000_hw.h to verify that your setup in
> supported.
> > >
> > > I have patched polling driver of e1000 v. 5.2.16
> > > which might support
> > > your card. I wouldn't recommend this driver for
> > > production environments
> > > though as I've picked up a small percentage of
> > > packet loss not seen in
> > > the click released e1000 driver.
> > >
> > > I'm busy playing on a polling driver based on
> the
> > > e1000 v.5.7.6 (latest
> > > Intel driver). When/if I get it working I'll let
> you
> > > know.
> > >
> > > Regards
> > >
> > > Beyers
> > >
> > > Indian Mogul wrote:
> > >
> > > >Hi,
> > > >
> > > >I am facing some problems while trying to
> extract
> > > >packets   using PollDevice(). I have two Intel
> Pro
> > > >1000 cards and am running on kernel 2.4.26
> which
> > > has
> > > >been properly patched with the cvs click
> patches
> > > >(v1.4.3)
> > > >----
> > > >click_conf.conf:36: While configuring
> 'PollDevice at 6
> > > ::
> > > >PollDevice':
> > > >  device 'eth1' not pollable, use FromDevice
> > > instead
> > > >/home/click/router_conf/click_conf.conf:47:
> > > > While configuring 'PollDevice at 15 ::
> PollDevice':
> > > >  device 'eth2' not pollable, use FromDevice
> > > instead
> > > >Router could not be initialized!
> > > >---
> > > >Following is the o/p from /proc/interrupts:
> > > >          CPU0
> > > >  0:   59169236          XT-PIC  timer
> > > >  1:         17          XT-PIC  keyboard
> > > >  2:          0          XT-PIC  cascade
> > > >  3:     295835          XT-PIC  eth1
> > > >  4:        173          XT-PIC  serial
> > > >  8:          2          XT-PIC  rtc
> > > >  9:    4338563          XT-PIC  acpi, eth0,
> > > usb-uhci
> > > > 11:     295835          XT-PIC  eth2
> > > > 14:     177169          XT-PIC  ide0
> > > > 15:    3064438          XT-PIC  ide1
> > > >NMI:          0
> > > >LOC:   59167832
> > > >ERR:          0
> > > >MIS:          0
> > > >
> > > >Thanks for u r help in advance,
> > > >IM
> > > >
> > > >
> > > >
> > >
> >__________________________________________________
> > > >Do You Yahoo!?
> > > >Tired of spam?  Yahoo! Mail has the best spam
> > > protection around
> > > >http://mail.yahoo.com
> > > >_______________________________________________
> > > >click mailing list
> > > >click at amsterdam.lcs.mit.edu
> > >
> >
>
>https://amsterdam.lcs.mit.edu/mailman/listinfo/click
> > > >
> > > >
> > > >
> > >
> > >
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> > _______________________________________________
> > click mailing list
> > click at amsterdam.lcs.mit.edu
> >
> https://amsterdam.lcs.mit.edu/mailman/listinfo/click
> >
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


More information about the click mailing list