SIOCADDRT
mariedora at tiscali.it
mariedora at tiscali.it
Mon Apr 29 16:48:30 EDT 2002
Hi Douglas,
I try yet to run Grid on my iPaq, but This is what appens when I put the
wireless card:
# eth0: Too much work at interrupt, status 0x22
cardmgr[78]: executing: './network stop eth0'
cardmgr[78]: + Stopping Grid
cardmgr[78]: +
cardmgr[78]: executing: 'modprobe -r pcnet_cs'
cardmgr[78]: executing: 'modprobe -r 8390'
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
cardmgr[78]: socket 0: Compaq WL110 PC Card
cardmgr[78]: executing: 'modprobe orinoco_cs'
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
cardmgr[78]: executing: './network start eth0'
cardmgr[78]: + Starting Grid network interface
cardmgr[78]: + Warning: kernel-module version mismatch
cardmgr[78]: + /etc/grid/ethertap.o was compiled for kernel version 2.4.7-rmk3-
np1
cardmgr[78]: + while this kernel is version 2.4.7-rmk3-np1-devfs
cardmgr[78]: + Warning: kernel-moduleNetwork Kernel/User communications
module 0
.04
version mismatch
cardmgr[78]: + /etc/grid/netlink_dev.o was compiled for kernel version
2.4.7-rm
k3-np1
cardmgr[78]: + while this kernel is version 2.4.7-rmk3-np1-devfs
cardmgr[78]: +
cardmgr[78]: + Usage: build-grid-config.sh <IP> <NETMASK> <DEV> [options]
cardmgr[78]: +
cardmgr[78]: + Options:
cardmgr[78]: + -V, --verbose
cardmgr[78]: +
cardmgr[78]: + --gateway-device DEV Enable gateway functionality, use
DEV a
s the gateway device;
cardmgr[78]: + get the gateway IP by looking at DEV's
configu
ration.
cardmgr[78]: + --gateway-ip IP Specify an explicit gateway device
IP a
ddress.
cardmgr[78]: +
cardmgr[78]: + --no-location Be location-unaware; this is the
defaul
t.
cardmgr[78]: + --location LAT LON Specify the node's location as
decimal
latitude/longitude.
cardmgr[78]: + This option is not compatible with --no-locati
on.
cardmgr[78]: +
cardmgr[78]: + --click CLICK Where to find the Click executable.
cardmgr[78]: + Default: click
cardmgr[78]: + --m4 M4 Where to find the m4 executable.
cardmgr[78]: + Default: m4
cardmgr[78]: + --config CONFIG Which Click configuration file
to use.
cardmgr[78]: + Default: grid.click
cardmgr[78]: + --params PARAM Which Grid parameter file to use.
cardmgr[78]: + Default: grid-params.m4
cardmgr[78]: +
cardmgr[78]: + -h, --help Print this message and exit.
cardmgr[78]: +
cardmgr[78]: + warning: <stdin>: empty configuration
cardmgr[78]: + SIOCADDRT: Network is unreachable
What does it mean?
In /tmp directory exists a runtime_grid.click file, but it's empty.
Thanks
Maria
__________________________________________________________________
Abbonati a Tiscali!
Con Tiscali By Phone puoi anche ascoltare ed inviare email al telefono.
Chiama Tiscali By Phone all' 892 800 http://byphone.tiscali.it
More information about the click
mailing list