problem with arp-request

[Brecht Vermeulen]

Hi Torsten,

maybe it would be interesting to see which configuration you have used
(/proc/click/config)
or did you use the perl script in the conf dir ?

I also can't open your tcpdump file

Caesar:/remov_g# tcpdump -r arp.tcpdump
tcpdump: unknown data link type 0x71 

or am I wrong ?

regards,
Brecht

Torsten Kaden wrote:
> 
> hello
> 
> we are using the click-router in a very simple oonfiguration. one router with
> two ethernet-interfaces (10.4.0.254/16, 10.5.0.254/16) and one single host
> connected to each (10.4.0.1/16, 10.5.0.1/16). sending a ping from host
> 10.4.0.1 to host 10.5.0.1 we encounterd the following problem.
> 
> the arp-request sent by the click-router into the destination subnet contains
> the wrong ip address to be resolved.
> 
> for a better understanding of our problem we attached a tcpdump-file.
> 
> have you experienced this problem so far?
> 
> thank you and have a nice day
> 
> 
>   ------------------------------------------------------------------------
>                   Name: arp.tcpdump
>    arp.tcpdump    Type: unspecified type (APPLICATION/octet-stream)
>               Encoding: BASE64