6.828 Fall 2010 Lab 4: Preemptive Multitasking

Handed out Wednesday, October 13, 2010
Part A due Thursday, October 21, 2010
Part B due Thursday, October 28, 2010
Part C due Thursday, November 4, 2010

Introduction

In this lab you will implement preemptive multitasking among multiple simultaneously active user-mode environments. In part A you will implement round-robin scheduling and the basic environment management system calls (calls that create and destroy environments, and allocate/map memory).

In part B, you will implement a Unix-like fork(), which allows a user-mode environment to create copies of itself.

Finally, in part C you will add support for inter-process communication (IPC), allowing different user-mode environments to communicate and synchronize with each other explicitly. You will also add support for hardware clock interrupts and preemption.

Getting Started

Use Git to commit your Lab 3 source, fetch the latest version of the course repository, and then create a local branch called lab4 based on our lab4 branch, origin/lab4:

athena% cd ~/6.828/lab
athena% add git
athena% git commit -am 'my solution to lab3'
Created commit 734fab7: my solution to lab3
 4 files changed, 42 insertions(+), 9 deletions(-)
athena% git pull
Already up-to-date.
athena% git checkout -b lab4 origin/lab4
Branch lab4 set up to track remote branch refs/remotes/origin/lab4.
Switched to a new branch "lab4"
athena% git merge lab3
Merge made by recursive.
 kern/env.c |   42 +++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)
athena% 

Lab Requirements

This lab is divided into three parts, A, B, and C. We have allocated one week in the schedule for each part.

As before, you will need to do all of the regular exercises described in the lab and at least one challenge problem. (You do not need to do one challenge problem per part, just one for the whole lab.) Additionally, you will need to write up a brief description of the challenge problem that you implemented. If you implement more than one challenge problem, you only need to describe one of them in the write-up, though of course you are welcome to do more. Place the write-up in a file called answers-lab4.txt (plain text) or answers-lab4.html (HTML format) in the top level of your lab directory before handing in your work.

Part A: User-level Environment Creation and Cooperative Multitasking

In the first part of this lab, you will implement some new JOS kernel system calls to allow user-level environments to create additional new environments. You will also implement cooperative round-robin scheduling, allowing the kernel to switch from one environment to another when the current environment voluntarily relinquishes the CPU (or exits). Later in part C you will implement preemptive scheduling, which allows the kernel to re-take control of the CPU from an environment after a certain time has passed even if the environment does not cooperate.

Round-Robin Scheduling

Your first task in this lab is to change the JOS kernel so that it does not always just run the environment in envs[0], but instead can alternate between multiple environments in "round-robin" fashion. Round-robin scheduling in JOS works as follows:

Exercise 1. Implement round-robin scheduling in sched_yield() as described above. Don't forget to modify syscall() to dispatch sys_yield().

Modify kern/init.c to create three (or more!) environments that all run the program user/yield.c. You should see the environments switch back and forth between each other five times before terminating, like this:

...
Hello, I am environment 00001001.
Hello, I am environment 00001002.
Hello, I am environment 00001003.
Back in environment 00001001, iteration 0.
Back in environment 00001002, iteration 0.
Back in environment 00001003, iteration 0.
Back in environment 00001001, iteration 1.
Back in environment 00001002, iteration 1.
Back in environment 00001003, iteration 1.
...

After the yield programs exit, the idle environment should run and invoke the JOS kernel debugger. If any of this does not happen, then fix your code before proceeding.

Question

  1. In your implementation of env_run() you should have called lcr3(). Before and after the call to lcr3(), your code makes references (at least it should) to the variable e, the argument to env_run. Upon loading the %cr3 register, the addressing context used by the MMU is instantly changed. But a virtual address (namely e) has meaning relative to a given address context--the address context specifies the physical address to which the virtual address maps. Why can the pointer e be dereferenced both before and after the addressing switch?

Challenge! Add a less trivial scheduling policy to the kernel, such as a fixed-priority scheduler that allows each environment to be assigned a priority and ensures that higher-priority environments are always chosen in preference to lower-priority environments. If you're feeling really adventurous, try implementing a Unix-style adjustable-priority scheduler or even a lottery or stride scheduler. (Look up "lottery scheduling" and "stride scheduling" in Google.)

Write a test program or two that verifies that your scheduling algorithm is working correctly (i.e., the right environments get run in the right order). It may be easier to write these test programs once you have implemented fork() and IPC in parts B and C of this lab.

Challenge! The JOS kernel currently does not allow applications to use the x86 processor's x87 floating-point unit (FPU), MMX instructions, or Streaming SIMD Extensions (SSE). Extend the Env structure to provide a save area for the processor's floating point state, and extend the context switching code to save and restore this state properly when switching from one environment to another. The FXSAVE and FXRSTOR instructions may be useful, but note that these are not in the old i386 user's manual because they were introduced in more recent processors. Write a user-level test program that does something cool with floating-point.

System Calls for Environment Creation

Although your kernel is now capable of running and switching between multiple user-level environments, it is still limited to running environments that the kernel initially set up. You will now implement the necessary JOS system calls to allow user environments to create and start other new user environments.

Unix provides the fork() system call as its process creation primitive. Unix fork() copies the entire address space of calling process (the parent) to create a new process (the child). The only differences between the two observable from user space are their process IDs and parent process IDs (as returned by getpid and getppid). In the parent, fork() returns the child's process ID, while in the child, fork() returns 0. By default, each process gets its own private address space, and neither process's modifications to memory are visible to the other.

You will provide a different, more primitive set of JOS system calls for creating new user-mode environments. With these system calls you will be able to implement a Unix-like fork() entirely in user space, in addition to other styles of environment creation. The new system calls you will write for JOS are as follows:

sys_exofork:
This system call creates a new environment with an almost blank slate: nothing is mapped in the user portion of its address space, and it is not runnable. The new environment will have the same register state as the parent environment at the time of the sys_exofork call. In the parent, sys_exofork will return the envid_t of the newly created environment (or a negative error code if the environment allocation failed). In the child, however, it will return 0. (Since the child starts out marked as not runnable, sys_exofork will not actually return in the child until the parent has explicitly allowed this by marking the child runnable using....)
sys_env_set_status:
Sets the status of a specified environment to ENV_RUNNABLE or ENV_NOT_RUNNABLE. This system call is typically used to mark a new environment ready to run, once its address space and register state has been fully initialized.
sys_page_alloc:
Allocates a page of physical memory and maps it at a given virtual address in a given environment's address space.
sys_page_map:
Copy a page mapping (not the contents of a page!) from one environment's address space to another, leaving a memory sharing arrangement in place so that the new and the old mappings both refer to the same page of physical memory.
sys_page_unmap:
Unmap a page mapped at a given virtual address in a given environment.

For all of the system calls above that accept environment IDs, the JOS kernel supports the convention that a value of 0 means "the current environment." This convention is implemented by envid2env() in kern/env.c.

We have provided a very primitive implementation of a Unix-like fork() in the test program user/dumbfork.c. This test program uses the above system calls to create and run a child environment with a copy of its own address space. The two environments then switch back and forth using sys_yield as in the previous exercise. The parent exits after 10 iterations, whereas the child exits after 20.

Exercise 2. Implement the system calls described above in kern/syscall.c. You will need to use various functions in kern/pmap.c and kern/env.c, particularly envid2env(). For now, whenever you call envid2env(), pass 1 in the checkperm parameter. Be sure you check for any invalid system call arguments, returning -E_INVAL in that case. Test your JOS kernel with user/dumbfork and make sure it works before proceeding.

Challenge! Add the additional system calls necessary to read all of the vital state of an existing environment as well as set it up. Then implement a user mode program that forks off a child environment, runs it for a while (e.g., a few iterations of sys_yield()), then takes a complete snapshot or checkpoint of the child environment, runs the child for a while longer, and finally restores the child environment to the state it was in at the checkpoint and continues it from there. Thus, you are effectively "replaying" the execution of the child environment from an intermediate state. Make the child environment perform some interaction with the user using sys_cgetc() or readline() so that the user can view and mutate its internal state, and verify that with your checkpoint/restart you can give the child environment a case of selective amnesia, making it "forget" everything that happened beyond a certain point.

This completes Part A of the lab; check it using make grade and hand it in using make handin as usual.

Part B: Copy-on-Write Fork

As mentioned earlier, Unix provides the fork() system call as its primary process creation primitive. The fork() system call copies the address space of the calling process (the parent) to create a new process (the child).

xv6 Unix implements fork() by copying all data from the parent's pages into new pages allocated for the child. This is essentially the same approach that dumbfork() takes. The copying of the parent's address space into the child is the most expensive part of the fork() operation.

However, a call to fork() is frequently followed almost immediately by a call to exec() in the child process, which replaces the child's memory with a new program. This is what the the shell typically does, for example. In this case, the time spent copying the parent's address space is largely wasted, because the child process will use very little of its memory before calling exec().

For this reason, later versions of Unix took advantage of virtual memory hardware to allow the parent and child to share the memory mapped into their respective address spaces until one of the processes actually modifies it. This technique is known as copy-on-write. To do this, on fork() the kernel would copy the address space mappings from the parent to the child instead of the contents of the mapped pages, and at the same time mark the now-shared pages read-only. When one of the two processes tries to write to one of these shared pages, the process takes a page fault. At this point, the Unix kernel realizes that the page was really a "virtual" or "copy-on-write" copy, and so it makes a new, private, writable copy of the page for the faulting process. In this way, the contents of individual pages aren't actually copied until they are actually written to. This optimization makes a fork() followed by an exec() in the child much cheaper: the child will probably only need to copy one page (the current page of its stack) before it calls exec().

In the next piece of this lab, you will implement a "proper" Unix-like fork() with copy-on-write, as a user space library routine. Implementing fork() and copy-on-write support in user space has the benefit that the kernel remains much simpler and thus more likely to be correct. It also lets individual user-mode programs define their own semantics for fork(). A program that wants a slightly different implementation (for example, the expensive always-copy version like dumbfork(), or one in which the parent and child actually share memory afterward) can easily provide its own.

User-level page fault handling

A user-level copy-on-write fork() needs to know about page faults on write-protected pages, so that's what you'll implement first. Copy-on-write is only one of many possible uses for user-level page fault handling.

It's common to set up an address space so that page faults indicate when some action needs to take place. For example, most Unix kernels initially map only a single page in a new process's stack region, and allocate and map additional stack pages later "on demand" as the process's stack consumption increases and causes page faults on stack addresses that are not yet mapped. A typical Unix kernel must keep track of what action to take when a page fault occurs in each region of a process's space. For example, a fault in the stack region will typically allocate and map new page of physical memory. A fault in the program's BSS region will typically allocate a new page, fill it with zeroes, and map it. In systems with demand-paged executables, a fault in the text region will read the corresponding page of the binary off of disk and then map it.

This is a lot of information for the kernel to keep track of. Instead of taking the traditional Unix approach, you will decide what to do about each page fault in user space, where bugs are less damaging. This design has the added benefit of allowing programs great flexibility in defining their memory regions; you'll use user-level page fault handling later for mapping and accessing files on a disk-based file system.

Setting the Page Fault Handler

In order to handle its own page faults, a user environment will need to register a page fault handler entrypoint with the JOS kernel. The user environment registers its page fault entrypoint via the new sys_env_set_pgfault_upcall system call. We have added a new member to the Env structure, env_pgfault_upcall, to record this information.

Exercise 3. Implement the sys_env_set_pgfault_upcall system call. Be sure to enable permission checking when looking up the environment ID of the target environment, since this is a "dangerous" system call.

Normal and Exception Stacks in User Environments

During normal execution, a user environment in JOS will run on the normal user stack: its ESP register starts out pointing at USTACKTOP, and the stack data it pushes resides on the page between USTACKTOP-PGSIZE and USTACKTOP-1 inclusive. When a page fault occurs in user mode, however, the kernel will restart the user environment running a designated user-level page fault handler on a different stack, namely the user exception stack. In essence, we will make the JOS kernel implement automatic "stack switching" on behalf of the user environment, in much the same way that the x86 processor already implements stack switching on behalf of JOS when transferring from user mode to kernel mode!

The JOS user exception stack is also one page in size, and its top is defined to be at virtual address UXSTACKTOP, so the valid bytes of the user exception stack are from UXSTACKTOP-PGSIZE through UXSTACKTOP-1 inclusive. While running on this exception stack, the user-level page fault handler can use JOS's regular system calls to map new pages or adjust mappings so as to fix whatever problem originally caused the page fault. Then the user-level page fault handler returns, via an assembly language stub, to the faulting code on the original stack.

Each user environment that wants to support user-level page fault handling will need to allocate memory for its own exception stack, using the sys_page_alloc() system call introduced in part A.

Invoking the User Page Fault Handler

You will now need to change the page fault handling code in kern/trap.c to handle page faults from user mode as follows. We will call the state of the user environment at the time of the fault the trap-time state.

If there is no page fault handler registered, the JOS kernel destroys the user environment with a message as before. Otherwise, the kernel sets up a trap frame on the exception stack that looks like a struct UTrapframe from inc/trap.h:

                    <-- UXSTACKTOP
trap-time esp
trap-time eflags
trap-time eip
trap-time eax       start of struct PushRegs
trap-time ecx
trap-time edx
trap-time ebx
trap-time esp
trap-time ebp
trap-time esi
trap-time edi       end of struct PushRegs
tf_err (error code)
fault_va            <-- %esp when handler is run

The kernel then arranges for the user environment to resume execution with the page fault handler running on the exception stack with this stack frame; you must figure out how to make this happen. The fault_va is the virtual address that caused the page fault.

If the user environment is already running on the user exception stack when an exception occurs, then the page fault handler itself has faulted. In this case, you should start the new stack frame just under the current tf->tf_esp rather than at UXSTACKTOP. You should first push an empty 32-bit word, then a struct UTrapframe.

To test whether tf->tf_esp is already on the user exception stack, check whether it is in the range between UXSTACKTOP-PGSIZE and UXSTACKTOP-1, inclusive.

Exercise 4. Implement the code in page_fault_handler in kern/trap.c required to dispatch page faults to the user-mode handler. Be sure to take appropriate precautions when writing into the exception stack. (What happens if the user environment runs out of space on the exception stack?)

User-mode Page Fault Entrypoint

Next, you need to implement the assembly routine that will take care of calling the C page fault handler and resume execution at the original faulting instruction. This assembly routine is the handler that will be registered with the kernel using sys_env_set_pgfault_upcall().

Exercise 5. Implement the _pgfault_upcall routine in lib/pfentry.S. The interesting part is returning to the original point in the user code that caused the page fault. You'll return directly there, without going back through the kernel. The hard part is simultaneously switching stacks and re-loading the EIP.

Finally, you need to implement the C user library side of the user-level page fault handling mechanism.

Exercise 6. Finish set_pgfault_handler() in lib/pgfault.c.

Testing

Run user/faultread. You should see:

[00000000] new env 00001000
[00000000] new env 00001001
[00001001] user fault va 00000000 ip 0080003a
TRAP frame ...
[00001001] free env 00001001

Run user/faultdie. You should see:

[00000000] new env 00001000
[00000000] new env 00001001
i faulted at va deadbeef, err 6
[00001001] exiting gracefully
[00001001] free env 00001001

Run user/faultalloc. You should see:

[00000000] new env 00001000
[00000000] new env 00001001
fault deadbeef
this string was faulted in at deadbeef
fault cafebffe
fault cafec000
this string was faulted in at cafebffe
[00001001] exiting gracefully
[00001001] free env 00001001

If you see only the first "this string" line, it means you are not handling recursive page faults properly.

Run user/faultallocbad. You should see:

[00000000] new env 00001000
[00000000] new env 00001001
[00001001] user_mem_check assertion failure for va deadbeef
[00001001] free env 00001001

Make sure you understand why user/faultalloc and user/faultallocbad behave differently.

Challenge! Extend your kernel so that not only page faults, but all types of processor exceptions that code running in user space can generate, can be redirected to a user-mode exception handler. Write user-mode test programs to test user-mode handling of various exceptions such as divide-by-zero, general protection fault, and illegal opcode.

Implementing Copy-on-Write Fork

You now have the kernel facilities to implement copy-on-write fork() entirely in user space.

We have provided a skeleton for your fork() in lib/fork.c. Like dumbfork(), fork() should create a new environment, then scan through the parent environment's entire address space and set up corresponding page mappings in the child. The key difference is that, while dumbfork() copied pages, fork() will initially only copy page mappings. fork() will copy each page only when one of the environments tries to write it.

The basic control flow for fork() is as follows:

  1. The parent installs pgfault() as the C-level page fault handler, using the set_pgfault_handler() function you implemented above.
  2. The parent calls sys_exofork() to create a child environment.
  3. For each writable or copy-on-write page in its address space below UTOP, the parent calls duppage, which should map the page copy-on-write into the address space of the child and then remap the page copy-on-write in its own address space. duppage sets both PTEs so that the page is not writeable, and to contain PTE_COW in the "avail" field to distinguish copy-on-write pages from genuine read-only pages.

    The exception stack is not remapped this way, however. Instead you need to allocate a fresh page in the child for the exception stack. Since the page fault handler will be doing the actual copying and the page fault handler runs on the exception stack, the exception stack cannot be made copy-on-write: who would copy it?

    fork() also needs to handle pages that are present, but not writable or copy-on-write.

  4. The parent sets the user page fault entrypoint for the child to look like its own.
  5. The child is now ready to run, so the parent marks it runnable.

Each time one of the environments writes a copy-on-write page that it hasn't yet written, it will take a page fault. Here's the control flow for the user page fault handler:

  1. The kernel propagates the page fault to _pgfault_upcall, which calls fork()'s pgfault() handler.
  2. pgfault() checks that the fault is a write (check for FEC_WR in the error code) and that the PTE for the page is marked PTE_COW. If not, panic.
  3. pgfault() allocates a new page mapped at a temporary location and copies the contents of the faulting page contents into it. Then the fault handler maps the new page at the appropriate address with read/write permissions, in place of the old read-only mapping.

Exercise 7. Implement fork, duppage and pgfault in lib/fork.c.

Test your code with the forktree program. It should produce the following messages, with interspersed 'new env', 'free env', and 'exiting gracefully' messages. The messages may not appear in this order, and the environment IDs may be different.

	1001: I am ''
	1802: I am '0'
	2801: I am '00'
	3802: I am '000'
	2003: I am '1'
	5001: I am '11'
	4802: I am '10'
	6801: I am '100'
	5803: I am '110'
	3004: I am '01'
	8001: I am '011'
	7803: I am '010'
	4005: I am '001'
	6006: I am '111'
	7007: I am '101'
	

Challenge! Implement a shared-memory fork() called sfork(). This version should have the parent and child share all their memory pages (so writes in one environment appear in the other) except for pages in the stack area, which should be treated in the usual copy-on-write manner. Modify user/forktree.c to use sfork() instead of regular fork(). Also, once you have finished implementing IPC in part C, use your sfork() to run user/pingpongs. You will have to find a new way to provide the functionality of the global env pointer.

Challenge! Your implementation of fork makes a huge number of system calls. On the x86, switching into the kernel using interrupts has non-trivial cost. Augment the system call interface so that it is possible to send a batch of system calls at once. Then change fork to use this interface.

How much faster is your new fork?

You can answer this (roughly) by using analytical arguments to estimate how much of an improvement batching system calls will make to the performance of your fork: How expensive is an int 0x30 instruction? How many times do you execute int 0x30 in your fork? Is accessing the TSS stack switch also expensive? And so on...

Alternatively, you can boot your kernel on real hardware and really benchmark your code. See the RDTSC (read time-stamp counter) instruction, defined in the IA32 manual, which counts the number of clock cycles that have elapsed since the last processor reset. QEMU doesn't emulate this instruction faithfully (it can either count the number of virtual instructions executed or use the host TSC, neither of which reflects the number of cycles a real CPU would require).

This ends part B. As usual, you can grade your submission with make grade and hand it in with make handin.

Part C: Preemptive Multitasking and Inter-Process communication (IPC)

In the final part of lab 4 you will modify the kernel to preempt uncooperative environments and to allow environments to pass messages to each other explicitly.

Clock Interrupts and Preemption

Run the user/spin test program. This test program forks off a child environment, which simply spins forever in a tight loop once it receives control of the CPU. Neither the parent environment nor the kernel ever regains the CPU. This is obviously not an ideal situation in terms of protecting the system from bugs or malicious code in user-mode environments, because any user-mode environment can bring the whole system to a halt simply by getting into an infinite loop and never giving back the CPU. In order to allow the kernel to preempt a running environment, forcefully retaking control of the CPU from it, we must extend the JOS kernel to support external hardware interrupts from the clock hardware.

Interrupt discipline

External interrupts (i.e., device interrupts) are referred to as IRQs. There are 16 possible IRQs, numbered 0 through 15. The mapping from IRQ number to IDT entry is not fixed. Pic_init in picirq.c maps IRQs 0-15 to IDT entries IRQ_OFFSET through IRQ_OFFSET+15.

In kern/picirq.h, IRQ_OFFSET is defined to be decimal 32. Thus the IDT entries 32-47 correspond to the IRQs 0-15. For example, the clock interrupt is IRQ 0. Thus, IDT[IRQ_OFFSET+0] (i.e., IDT[32]) contains the address of the clock's interrupt handler routine in the kernel. This IRQ_OFFSET is chosen so that the device interrupts do not overlap with the processor exceptions, which could obviously cause confusion. (In fact, in the early days of PCs running MS-DOS, the IRQ_OFFSET effectively was zero, which indeed caused massive confusion between handling hardware interrupts and handling processor exceptions!)

In JOS, we make a key simplification compared to xv6 Unix. External device interrupts are always disabled when in the kernel (and, like xv6, enabled when in user space). External interrupts are controlled by the FL_IF flag bit of the %eflags register (see inc/mmu.h). When this bit is set, external interrupts are enabled. While the bit can be modified in several ways, because of our simplification, we will handle it solely through the process of saving and restoring %eflags register as we enter and leave user mode.

You will have to ensure that the FL_IF flag is set in user environments when they run so that when an interrupt arrives, it gets passed through to the processor and handled by your interrupt code. Otherwise, interrupts are masked, or ignored until interrupts are re-enabled. We masked interrupts with the very first instruction of the bootloader, and so far we have never gotten around to re-enabling them.

Exercise 8. Modify kern/trapentry.S and kern/trap.c to initialize the appropriate entries in the IDT and provide handlers for IRQs 0 through 15. Then modify the code in env_alloc() in kern/env.c to ensure that user environments are always run with interrupts enabled.

The processor never pushes an error code or checks the Descriptor Privilege Level (DPL) of the IDT entry when invoking a hardware interrupt handler. You might want to re-read section 9.2 of the 80386 Reference Manual, or section 5.8 of the IA-32 Intel Architecture Software Developer's Manual, Volume 3, at this time.

After doing this exercise, if you run your kernel with any test program that runs for a non-trivial length of time (e.g., spin), you should see the kernel print trap frames for hardware interrupts. While interrupts are now enabled in the processor, JOS isn't yet handling them, so you should see it misattribute each interrupt to the currently running user environment and destroy it. Eventually it should run out of environments to destroy and drop into the monitor.

Handling Clock Interrupts

In the user/spin program, after the child environment was first run, it just spun in a loop, and the kernel never got control back. We need to program the hardware to generate clock interrupts periodically, which will force control back to the kernel where we can switch control to a different user environment.

The calls to pic_init and kclock_init (from i386_init in init.c), which we have written for you, set up the clock and the interrupt controller to generate interrupts. You now need to write the code to handle these interrupts.

Exercise 9. Modify the kernel's trap_dispatch() function so that it calls sched_yield() to find and run a different environment whenever a clock interrupt takes place.

You should now be able to get the user/spin test to work: the parent environment should fork off the child, sys_yield() to it a couple times but in each case regain control of the CPU after one time slice, and finally kill the child environment and terminate gracefully.

This is a great time to do some regression testing. Make sure that you haven't broken any earlier part of that lab that used to work (e.g. forktree) by enabling interrupts. Run make grade to see for sure. You should now get a total score of 60/70 points on this lab.

Inter-Process communication (IPC)

(Technically in JOS this is "inter-environment communication" or "IEC", but everyone else calls it IPC, so we'll use the standard term.)

We've been focusing on the isolation aspects of the operating system, the ways it provides the illusion that each program has a machine all to itself. Another important service of an operating system is to allow programs to communicate with each other when they want to. It can be quite powerful to let programs interact with other programs. The Unix pipe model is the canonical example.

There are many models for interprocess communication. Even today there are still debates about which models are best. We won't get into that debate. Instead, we'll implement a simple IPC mechanism and then try it out.

IPC in JOS

You will implement a few additional JOS kernel system calls that collectively provide a simple interprocess communication mechanism. You will implement two system calls, sys_ipc_recv and sys_ipc_try_send. Then you will implement two library wrappers ipc_recv and ipc_send.

The "messages" that user environments can send to each other using JOS's IPC mechanism consist of two components: a single 32-bit value, and optionally a single page mapping. Allowing environments to pass page mappings in messages provides an efficient way to transfer more data than will fit into a single 32-bit integer, and also allows environments to set up shared memory arrangements easily.

Sending and Receiving Messages

To receive a message, an environment calls sys_ipc_recv. This system call de-schedules the current environment and does not run it again until a message has been received. When an environment is waiting to receive a message, any other environment can send it a message - not just a particular environment, and not just environments that have a parent/child arrangement with the receiving environment. In other words, the permission checking that you implemented in Part A will not apply to IPC, because the IPC system calls are carefully designed so as to be "safe": an environment cannot cause another environment to malfunction simply by sending it messages (unless the target environment is also buggy).

To try to send a value, an environment calls sys_ipc_try_send with both the receiver's environment id and the value to be sent. If the named environment is actually receiving (it has called sys_ipc_recv and not gotten a value yet), then the send delivers the message and returns 0. Otherwise the send returns -E_IPC_NOT_RECV to indicate that the target environment is not currently expecting to receive a value.

A library function ipc_recv in user space will take care of calling sys_ipc_recv and then looking up the information about the received values in the current environment's struct Env.

Similarly, a library function ipc_send will take care of repeatedly calling sys_ipc_try_send until the send succeeds.

Transferring Pages

When an environment calls sys_ipc_recv with a nonzero dstva parameter, the environment is stating that it is willing to receive a page mapping. If the sender sends a page, then that page should be mapped at dstva in the receiver's address space. If the receiver already had a page mapped at dstva, then that previous page is unmapped.

When an environment calls sys_ipc_try_send with a nonzero srcva, it means the sender wants to send the page currently mapped at srcva to the receiver, with permissions perm. After a successful IPC, the sender keeps its original mapping for the page at srcva in its address space, but the receiver also obtains a mapping for this same physical page at the dstva originally specified by the receiver, in the receiver's address space. As a result this page becomes shared between the sender and receiver.

If either the sender or the receiver does not indicate that a page should be transferred, then no page is transferred. After any IPC the kernel sets the new field env_ipc_perm in the receiver's Env structure to the permissions of the page received, or zero if no page was received.

Implementing IPC

Exercise 10. Implement sys_ipc_recv and sys_ipc_try_send in kern/syscall.c. Read the comments on both before implementing them, since they have to work together. When you call envid2env in these routines, you should set the checkperm flag to 0, meaning that any environment is allowed to send IPC messages to any other environment, and the kernel does no special permission checking other than verifying that the target envid is valid.

Then implement the ipc_recv and ipc_send functions in lib/ipc.c.

Use the user/pingpong and user/primes functions to test your IPC mechanism. You might find it interesting to read user/primes.c to see all the forking and IPC going on behind the scenes.

Challenge! The ipc_send function is not very fair. Run three copies of user/fairness and you will see this problem. The first two copies are both trying to send to the third copy, but only one of them will ever succeed. Make the IPC fair, so that each copy has approximately equal chance of succeeding.

Challenge! Why does ipc_send have to loop? Change the system call interface so it doesn't have to. Make sure you can handle multiple environments trying to send to one environment at the same time.

Challenge! The prime sieve is only one neat use of message passing between a large number of concurrent programs. Read C. A. R. Hoare, ``Communicating Sequential Processes,'' Communications of the ACM 21(8) (August 1978), 666-667, and implement the matrix multiplication example.

Challenge! One of the most impressive examples of the power of message passing is Doug McIlroy's power series calculator, described in M. Douglas McIlroy, ``Squinting at Power Series,'' Software--Practice and Experience, 20(7) (July 1990), 661-683. Implement his power series calculator and compute the power series for sin(x+x^3).

Challenge! Make JOS's IPC mechanism more efficient by applying some of the techniques from Liedtke's paper, "Improving IPC by Kernel Design", or any other tricks you may think of. Feel free to modify the kernel's system call API for this purpose, as long as your code is backwards compatible with what our grading scripts expect.

This ends part C. As usual, you can grade your submission with make grade and hand it in with make handin. If you are trying to figure out why a particular test case is failing, run sh grade.sh -v, which will show you the output of the kernel builds and QEMU runs for each test, until a test fails. When a test fails, the script will stop, and then you can inspect jos.out to see what the kernel actually printed.